1. Introduction
Thank you for choosing the Nuvo Lighting 65/615 LED Flood Light. This manual provides essential information for the safe installation, operation, and maintenance of your new flood light. Please read these instructions thoroughly before beginning installation and retain them for future reference.
2. Safety Information
WARNING: To reduce the risk of death, personal injury, or property damage from fire, electric shock, falling parts, cuts/abrasions, and other hazards, read all warnings and instructions included with and on the fixture box and all fixture labels.
- Installation must be performed by a qualified electrician in accordance with all local electrical codes and ordinances.
- Disconnect power at the fuse or circuit breaker before installation or servicing.
- This product is designed for outdoor, wet location use. Ensure all connections are properly sealed to prevent water intrusion.
- Do not handle the fixture with wet hands or when standing on wet or damp surfaces.
- Proposition 65 Warning: This product may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
3. Package Contents
Verify that all components are present and undamaged before installation.
- 1 x Nuvo Lighting 65/615 LED Flood Light (Bronze Finish)
Figure 3.1: Front view of the Nuvo Lighting 65/615 LED Flood Light. The light features a rectangular LED array housed within a bronze-finished aluminum casing, mounted on an adjustable bracket.
4. Setup and Installation
This flood light is designed for adjustable mounting and requires a corded electric power source (120-277 Volts).
4.1 Mounting the Fixture
- Choose a suitable outdoor location for mounting, ensuring it can support the weight of the fixture and provide adequate light coverage.
- Secure the adjustable mounting bracket to a sturdy surface using appropriate hardware (not included). The bracket allows for flexible positioning of the light beam.
- Attach the flood light fixture to the mounted bracket, ensuring it is firmly secured.
4.2 Electrical Connection
- ENSURE POWER IS DISCONNECTED AT THE CIRCUIT BREAKER BEFORE WIRING.
- Connect the fixture's electrical wires to the building's power supply wires according to local electrical codes. Typically, this involves connecting the black wire (live) to the black wire, the white wire (neutral) to the white wire, and the green or bare copper wire (ground) to the ground wire.
- Use UL-listed wire connectors and ensure all connections are tight and secure.
- For wet locations, use appropriate waterproof connectors and seal all openings to prevent moisture entry.
- Once wiring is complete, carefully tuck all wires into the junction box and secure the fixture cover.
Figure 4.1: Angled view of the Nuvo Lighting 65/615 LED Flood Light, showcasing the adjustable mounting arm and the robust bronze finish.
5. Operating Instructions
The Nuvo Lighting 65/615 LED Flood Light is designed for straightforward operation.
- After successful installation and power connection, restore power at the circuit breaker.
- The flood light is controlled via a standard electrical switch (control method: touch, referring to the wall switch). Flip the switch to the 'ON' position to illuminate the light.
- The light will emit a Cool White light at 4000 Kelvin, providing 9889 lumens of brightness.
- To turn off the light, flip the switch to the 'OFF' position.
6. Maintenance
The Nuvo Lighting 65/615 LED Flood Light requires minimal maintenance due to its durable construction and long-life LED components.
- Cleaning: Ensure power is disconnected before cleaning. Wipe the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the bronze finish or polycarbonate lens.
- Inspection: Periodically inspect the fixture for any signs of damage, loose connections, or wear. Address any issues promptly to ensure continued safe operation.
- LEDs are integrated and not user-replaceable. The fixture has a rated life of 50,000 hours.
7. Troubleshooting
If you experience issues with your flood light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. | Check circuit breaker, wall switch, and electrical connections. Ensure power is restored. |
| Light flickers or dims. | Loose wiring connection or incorrect voltage. | Verify all electrical connections are secure. Confirm input voltage is within 120-277V range. |
| Light turns on but is very dim. | Dust or debris on the lens. | Clean the polycarbonate lens with a soft, damp cloth (ensure power is off). |
If troubleshooting steps do not resolve the issue, contact Nuvo Lighting customer support.
8. Specifications
Detailed technical specifications for the Nuvo Lighting 65/615 LED Flood Light:
| Specification | Value |
|---|---|
| Model Number | 65/615 |
| Brand | Nuvo |
| Wattage | 70 Watts |
| Voltage | 120-277 Volts |
| Brightness | 9889 Lumens |
| Light Color Temperature | 4000K (Cool White) |
| Beam Spread | 150-degree |
| Rated Life | 50,000 hours |
| Material | Aluminum Alloy, Polycarbonate Lens |
| Finish | Bronze |
| Dimensions (L x W x H) | 11.5 x 10.44 x 2.25 inches |
| Item Weight | 5.51 pounds |
| Indoor/Outdoor Usage | Outdoor (Wet Location Rated) |
| Certifications | DLC Premium certified, cULus safety rating, UL |
9. Warranty and Support
The Nuvo Lighting 65/615 LED Flood Light comes with a 5-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or further inquiries, please contact Nuvo Lighting customer service. You can find more information about Nuvo products and support on their official store page:
