Alphamount APLF1-E Full Motion TV Wall Mount Instruction Manual

Introduction

Thank you for choosing the Alphamount APLF1-E Full Motion TV Wall Mount. This manual provides essential information for safe installation, operation, and maintenance of your TV wall mount. Please read these instructions carefully before installation to ensure proper setup and to prevent damage or injury. Keep this manual for future reference.

Safety Information

WARNING: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding your warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact Alphamount customer support or a qualified installer.

• This product is intended for installation by qualified personnel only.
• Ensure the mounting surface can safely support the combined weight of the equipment and all attached hardware.
• Never exceed the maximum load capacity of 60 kg (132 lbs).
• Use only the provided mounting hardware. Do not use power tools to tighten screws excessively.
• Always check for hidden electrical wires, water pipes, or gas lines in the wall before drilling.
• Do not install on drywall or plasterboard walls alone. Compatible with wood studs, concrete, or brick walls.
• Keep children and pets away during installation.

Package Contents

Verify that all components are present and undamaged before installation. If any parts are missing or defective, contact Alphamount customer support.

Image: Overview of the Alphamount APLF1-E TV wall mount, showing its robust design, compatibility for 37-84 inch TVs, and a maximum load capacity of 60kg. Insets highlight automated welding, safety lock screws, and a sturdy one-piece wall plate.

The package typically includes:

• Wall Plate Assembly
• TV Brackets (2x)
• Mounting Hardware Kit (screws, anchors, washers, spacers for various TV models and wall types)
• Bubble Level
• Instruction Manual

Compatibility

This TV wall mount is designed for a wide range of televisions. Please ensure your TV meets the following criteria:

• Screen Size: Fits most 37-84 inch (94-213 cm) flat or curved TVs.
• Weight Capacity: Supports TVs weighing up to 60 kg (132 lbs).
• VESA Patterns: Compatible with VESA mounting hole patterns from 200x100mm up to 600x400mm. Common patterns include:
  • 200x100mm, 200x200mm, 200x300mm, 200x400mm
  • 300x200mm, 300x400mm
  • 400x200mm, 400x300mm, 400x400mm
  • 500x300mm
  • 600x200mm, 600x400mm

Before purchasing or installing, verify your TV's VESA pattern, weight, and size.

Key Features

• Optimized Viewing Experience: Adjust your TV for the best view from any seat.
  

  Image: A TV mounted on the wall, demonstrating the tilt feature. The screen can tilt -15° to +5° to reduce glare from windows or lights, ensuring a comfortable viewing experience.

  

  Image: A TV mounted on a full-motion arm, swiveling up to ±60°. This allows for adjusting the viewing angle to suit different seating positions in a room.

  • Tilt: -15° (downward) to +5° (upward) to reduce glare.
  • Swivel: Up to 60° left or right to adjust the viewing angle.
  • Leveling: ±3° post-installation leveling for perfect alignment.
• Flexible Extension Arms: The articulating arms allow for flexible positioning.
  

  Image: Illustration of the TV mount's extension and leveling capabilities. The mount can extend from 73mm to 389mm from the wall, and offers ±3° leveling adjustment for precise screen alignment.
  • Extension: Extends up to 389 mm (15.3 inches) from the wall for closer viewing.
  • Retraction: Collapses to 73 mm (2.9 inches) from the wall to save space when not in use.
• Strong and Sturdy Design: Constructed for durability and safety.
  • Made from heavy-duty steel.
  • Double arm structure enhances load-bearing capacity.
  • Assembled using automated welding technology for a clean finish and robust structure.
  • Features safety lock screws for secure TV attachment.

Installation Guide

This section provides a general overview of the installation process. Refer to the included detailed instruction manual for step-by-step diagrams and specific hardware usage.

Tools Required (Not Included):

• Pencil
• Stud Finder (for wood stud installation)
• Drill
• Drill Bits (appropriate for wall type and anchor size)
• Socket Wrench or Adjustable Wrench
• Phillips Head Screwdriver
• Measuring Tape
• Safety Glasses

Wall Type Compatibility:

Image: Illustrates the compatibility of the Alphamount TV mount with different wall types: wood studs (12"/16" spacing), brick walls, and concrete walls. Two installers are shown holding a TV, ready to mount it.

• Wood Stud Walls: Compatible with 12-inch or 16-inch wood stud spacing. Ensure studs are solid and capable of supporting the weight.
• Concrete Walls: Suitable for solid concrete walls.
• Brick Walls: Suitable for solid brick walls.
• Not for use on drywall or plasterboard walls alone without wood stud or concrete backing.

Installation Steps (Simplified):

1. Prepare the TV: Attach the TV brackets to the back of your TV using the appropriate screws, washers, and spacers from the hardware kit. Ensure the brackets are centered and securely fastened.
2. Mark Wall Drilling Locations: Determine the desired height for your TV. Use a pencil and the included bubble level to mark the drilling points for the wall plate. For wood studs, locate the center of the studs.
3. Drill Pilot Holes: Drill pilot holes at the marked locations. Use the correct drill bit size for your wall type and anchors.
4. Mount the Wall Plate: Secure the wall plate to the wall using the appropriate lag bolts and washers. Ensure it is level and tightly fastened.
5. Hang the TV: Carefully lift the TV (with brackets attached) and hook it onto the wall plate assembly. This step often requires two people.
6. Secure the TV: Engage the safety lock screws on the TV brackets to prevent the TV from accidentally disengaging from the mount.
7. Final Adjustments: Adjust the tilt, swivel, and leveling as desired.

For detailed visual instructions, refer to the included manual or visit the Alphamount support website.

Operating Instructions (Adjustments)

Once installed, your Alphamount APLF1-E mount allows for flexible TV positioning:

• Tilt Adjustment: Loosen the tilt adjustment knobs on the TV brackets, adjust the TV to the desired vertical angle (-15° to +5°), and then re-tighten the knobs to secure the position.
• Swivel Adjustment: Gently push or pull the TV screen to swivel it left or right (up to 60° in each direction) to achieve your preferred horizontal viewing angle.
• Extension/Retraction: Pull the TV gently away from the wall to extend the arms (up to 389mm) or push it back towards the wall to retract (down to 73mm).
• Leveling Adjustment: If your TV appears slightly unlevel after installation, you can adjust the ±3° leveling mechanism. Consult the detailed manual for specific instructions on how to access and adjust the leveling screws.

Image: A "Before and After" comparison showing how the Alphamount TV mount saves space. The "Before" image shows a TV on a stand, while the "After" image shows the TV mounted on the wall, retracted to 73mm, freeing up floor space.

Maintenance

Regular maintenance ensures the longevity and safe operation of your TV wall mount:

• Cleaning: Wipe the mount with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Check Connections: Periodically check all screws and bolts to ensure they remain tight. Re-tighten if necessary, but do not overtighten.
• Inspect for Damage: Regularly inspect the mount for any signs of wear, damage, or corrosion. If any issues are found, discontinue use and contact customer support.

Troubleshooting

If you encounter issues during or after installation, refer to the following common solutions:

• TV is not level:
  • Ensure the wall plate was installed level.
  • Use the post-installation leveling adjustment feature (refer to the detailed manual for instructions).
• TV does not fit the mount:
  • Verify your TV's VESA pattern matches the mount's compatibility (200x100mm to 600x400mm).
  • Ensure your TV's weight is within the 60 kg limit.
  • Check that the TV screen size is between 37-84 inches.
• Mount feels unstable:
  • Ensure all lag bolts securing the wall plate are fully tightened into a solid wall structure (wood stud, concrete, or brick).
  • Verify that the safety lock screws on the TV brackets are engaged.
  • Do not exceed the maximum weight capacity.
• Difficulty adjusting tilt/swivel:
  • For tilt, ensure the adjustment knobs are sufficiently loosened before attempting to change the angle.
  • For swivel, ensure no cables are snagged or restricting movement.

If problems persist, contact Alphamount customer support for assistance.

Specifications

Warranty Information

The Alphamount APLF1-E TV Wall Mount comes with a 5-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications. Please retain your proof of purchase for warranty claims.

Customer Support

For technical assistance, missing parts, or warranty inquiries, please contact Alphamount customer support. Our team is dedicated to providing superior quality and user-friendly products.

Alphamount: Innovating products that enhance the quality of everyday life.

Please visit our official website or contact us via the platform where you purchased the product for the most up-to-date support information.