DELTACO EV-1107 Electric Car EV Charging Cable User Manual

1. Introduction

The DELTACO EV-1107 charging cable is designed for efficient and reliable charging of electric vehicles. This 7-meter, 1-phase cable supports a maximum charging power of 3.6 kW at 16 A, featuring a Type 2 to Type 1 connection, which is standard for many charging columns and vehicles in the European area. Its robust construction, including TPE material and silver-plated contacts, ensures durability and optimal performance. The cable is IP66 certified, providing protection against dust and strong water jets, making it suitable for various weather conditions. It incorporates bi-directional communication for a self-test before charging and a mechanical lock for security.

Figure 1: DELTACO EV-1107 Electric Car EV Charging Cable.

2. Important Safety Instructions

Please read and understand all safety instructions before using the charging cable. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Do Not Repair or Splice: The cable must not be repaired or spliced under any circumstances. Any modification can compromise safety and functionality.
• Inspect Before Use: Always inspect the charging cable and connectors for any signs of damage, wear, or foreign objects before each use. Do not use if damaged.
• Keep Dry: Ensure connectors are dry before plugging in. Avoid submerging the cable or connectors in water.
• Proper Connection: Ensure the cable is fully and securely connected to both the charging station and the vehicle before initiating charging.
• Secure Locking: The mechanical lock feature helps prevent unauthorized use and theft during charging. Ensure it engages properly.
• Children and Pets: Keep the charging cable out of reach of children and pets during use and storage.
• Operating Temperature: Use the cable within its specified working temperature range of -30 °C to +50 °C.

3. What's in the Box

Upon opening the package, please verify that all the following items are included:

• DELTACO EV-1107 Electric Car EV Charging Cable (7 meters)
• Operating Instructions Manual

4. Setup

The DELTACO EV-1107 charging cable requires minimal setup. Follow these steps before your first charge:

1. Unpack: Carefully remove the charging cable from its packaging.
2. Initial Inspection: Visually inspect the entire length of the cable and both connectors (Type 2 and Type 1) for any signs of damage, kinks, or foreign objects. Ensure the silver-plated contacts are clean and free from debris.
3. Storage: When not in use, store the cable neatly coiled in a dry, cool place, away from direct sunlight and extreme temperatures.

Figure 2: Type 1 (left) and Type 2 (right) connectors.

5. Operating Instructions

Follow these steps to safely and effectively charge your electric vehicle:

1. Prepare the Charging Station: Ensure the charging station is active and ready for use. Follow the station's instructions if necessary.
2. Connect to Charging Station (Type 2): Take the Type 2 connector (the larger, rounder one) and firmly insert it into the corresponding port on the charging station. Ensure it clicks into place.
3. Connect to Vehicle (Type 1): Take the Type 1 connector (the smaller, D-shaped one) and firmly insert it into the charging port on your electric vehicle. Ensure it clicks into place.
4. Initiate Charging: The cable supports bi-directional communication. A self-test will be performed between the vehicle and the charger to ensure proper connection. Once the self-test is complete and successful, the charging process will begin automatically or require activation via the charging station's interface or your vehicle's system. The mechanical lock will engage, securing the cable during charging.
5. Monitor Charging: Observe the charging status indicators on your vehicle's dashboard or the charging station.
6. Disconnect After Charging: Once charging is complete, first disconnect the Type 1 charging cable from your vehicle's port. This is crucial for safety and proper operation.
7. Disconnect from Charging Station: After disconnecting from the vehicle, then disconnect the Type 2 cable from the charging station.
8. Store Cable: Neatly coil the cable and store it in a safe, dry place.

Figure 3: Charging cable in use at a public charging station.

Figure 4: Charging station display indicating active charging.

6. Maintenance

Proper maintenance ensures the longevity and safe operation of your DELTACO EV-1107 charging cable.

• Cleaning: Wipe the cable and connectors with a clean, dry, or slightly damp cloth. Do not use harsh chemicals, solvents, or abrasive cleaners. Ensure connectors are completely dry before storage or next use.
• Inspection: Regularly inspect the cable for cuts, abrasions, or damage to the insulation. Check connectors for bent pins, corrosion, or cracks. If any damage is found, discontinue use immediately.
• Storage: Coil the cable loosely and store it in a clean, dry environment, away from direct sunlight, extreme temperatures, and heavy objects that could crush or damage it.
• Avoid Kinks: Do not bend or kink the cable sharply, as this can damage the internal wiring.

7. Troubleshooting

If you encounter issues with your charging cable, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact DELTACO customer support or a qualified technician.

8. Specifications

9. Warranty and Support

For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your product or visit the official DELTACO website. You may also contact your retailer for assistance.

Please have your product model number (EV-1107) and purchase date ready when contacting support.