ANLAN Electric Scalp Massager (Model: TBAMY01) User Manual

1. Product Overview

The ANLAN Electric Scalp Massager is designed to provide a relaxing and effective scalp massage experience. It features a vibration function and is IPX7 waterproof, allowing for use in various environments, including during shampooing.

Key Features:

• 3D Silicone Claws: Unique design with 84 and 96 protrusions on the tips, mimicking human finger movements for a thorough scalp massage.
• IPX7 Waterproof: The main unit is fully waterproof for safe use in wet conditions, such as in the shower or bath. (Note: The charging stand is not waterproof.)
• Two-Stage Vibration: Offers adjustable vibration modes and low/high-speed settings for personalized comfort.
• Silent Operation: Designed for quiet use, suitable for any time of day.
• 10-Minute Auto-Timer: Automatically shuts off after 10 minutes to prevent overuse.
• Ergonomic Design & Type-C Charging: Comfortable to hold for one-handed operation, with a convenient Type-C charging stand for easy recharging. Cordless design for portability.

2. Safety Instructions

Please read all safety instructions carefully before using the ANLAN Electric Scalp Massager to ensure safe operation and prevent injury or damage.

• Do not use the device if you have any scalp conditions, open wounds, or skin irritations. Consult a doctor before use if you have any medical concerns.
• Keep the device out of reach of children. This is not a toy.
• Ensure the charging stand is kept away from water and moisture. The charging stand is not waterproof.
• Only use the provided charging cable and adapter.
• Do not disassemble, repair, or modify the device yourself. Contact customer support for assistance.
• Avoid using the device for extended periods on a single area of the scalp. The built-in 10-minute timer is designed to prevent overuse.
• If you experience any discomfort or pain during use, stop immediately.
• Do not use the device while charging.

3. Package Contents and Parts Identification

Package Contents:

• ANLAN Electric Scalp Massager Main Unit
• Type-C Charging Stand
• Standard Silicone Brush Heads (pre-installed)
• Body Silicone Brush Heads (alternative set)
• USB Charging Cable
• User Manual

Parts Identification:

The massager comes with two types of interchangeable silicone brush heads: one designed for scalp massage and another for body massage. These can be easily attached and detached from the main unit.

4. Setup

4.1 Initial Charging

1. Place the ANLAN Electric Scalp Massager main unit onto the Type-C charging stand.
2. Connect the USB charging cable to the charging stand and then to a suitable USB power adapter (not included) or a computer USB port.
3. The indicator light on the massager will illuminate to show it is charging. A full charge typically takes approximately [X hours - *information not provided in JSON, placeholder for actual manual*].
4. Once fully charged, the indicator light will change or turn off. Disconnect the charging cable and remove the massager from the stand.

Important: Ensure the charging stand is placed on a dry, stable surface. The charging stand is not waterproof.

4.2 Attaching/Detaching Brush Heads

1. To attach a brush head, align the grooves on the brush head with the corresponding slots on the main unit and press firmly until it clicks into place.
2. To detach a brush head, gently pull it away from the main unit.

5. Operating Instructions

The ANLAN Electric Scalp Massager is designed for simple, one-handed operation.

5.1 Power ON/OFF and Mode Selection

1. Power On: Press and hold the power button for approximately 2 seconds to turn on the device. It will start in the default massage mode.
2. Change Mode/Speed: Briefly press the power button to cycle through the available massage modes and speed settings (e.g., low speed, high speed, vibration mode).
3. Power Off: Press and hold the power button for approximately 2 seconds to turn off the device.

5.2 Using the Massager

• Gently place the silicone brush heads onto your scalp or desired body area.
• Move the massager slowly across the area, allowing the rotating claws to stimulate the skin.
• The device will automatically shut off after 10 minutes of continuous use. You can restart it if desired, but it is recommended to take breaks to avoid over-stimulation.

6. Maintenance and Cleaning

Regular cleaning ensures hygiene and prolongs the lifespan of your device.

6.1 Cleaning the Silicone Brush Heads

1. Detach the silicone brush heads from the main unit.
2. Rinse the brush heads under running water. You can use a mild soap if necessary.
3. Ensure all hair and debris are removed.
4. Allow the brush heads to air dry completely before reattaching or storing.

6.2 Cleaning the Main Unit

1. After each use, wipe the main unit with a soft, damp cloth.
2. Do not use abrasive cleaners or harsh chemicals.
3. Ensure the charging port area is dry before placing it on the charging stand.

6.3 Storage

• Store the device in a cool, dry place away from direct sunlight.
• Keep the device and its accessories in their original packaging or a protective case when not in use.

7. Troubleshooting

If you encounter any issues with your ANLAN Electric Scalp Massager, please refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact ANLAN customer support.

8. Specifications

9. Warranty and Support

9.1 Product Warranty

This ANLAN Electric Scalp Massager comes with a 1-year warranty from the date of purchase. The warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized repairs, or normal wear and tear.

9.2 Customer Support

For any questions regarding the product, technical assistance, or warranty claims, please contact ANLAN customer service. You can reach us via email at the address provided by your retailer or on the official ANLAN website. We aim to provide customer support within 24 hours.

Please have your purchase receipt and product model number (TBAMY01) ready when contacting support.