Dyson Cyclone V10 Total Clean+ User Manual

Introduction

Welcome to the user manual for your new Dyson Cyclone V10 Total Clean+ Cord-Free Stick Vacuum Cleaner. This manual provides essential information on assembly, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your appliance. Please read this manual thoroughly before first use and retain it for future reference.

Important Safety Instructions

Always follow basic safety precautions when using an electrical appliance.

• Do not use outdoors or on wet surfaces.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only Dyson recommended attachments.
• Do not use with a damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use without dust bin and/or filters in place.
• Turn off all controls before unplugging.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Connect to a properly grounded outlet only. See grounding instructions.

Product Components

Your Dyson Cyclone V10 Total Clean+ comes with several components designed for versatile cleaning.

Overall View: The Dyson Cyclone V10 Total Clean+ vacuum cleaner shown with its main body, extension wand, and all included cleaning heads and accessories. This image provides a comprehensive look at all parts you should have.

Assembled Vacuum: The Dyson Cyclone V10 Total Clean+ assembled with the main cleaner head, ready for use. This shows the vacuum in its typical upright operating configuration.

Soft Roller Cleaner Head: A close-up of the soft roller cleaner head, ideal for hard floors. It features soft woven nylon and anti-static carbon fiber filaments.

Mini Motorized Tool: This attachment is designed for removing pet hair and ground-in dirt from upholstery and confined spaces.

Mini Soft Dusting Brush: Features soft bristles for gentle dusting around the home, suitable for delicate surfaces.

Combination Tool: A two-in-one tool with a wide nozzle and brush, for quick switching between cleaning and dusting tasks.

Crevice Tool: Designed for precise cleaning around edges and in narrow gaps.

Setup and First Use

Charging the Battery

Before first use, fully charge your Dyson Cyclone V10.

1. Connect the charger to the charging port on the main body of the vacuum.
2. Plug the charger into a wall outlet.
3. The blue LED indicator lights on the battery will pulse during charging and turn off when fully charged. A full charge takes approximately 3.5 hours.

Assembling the Vacuum

1. Insert the wand into the main body until it clicks securely into place.
2. Attach your desired cleaning head (e.g., Soft Roller Cleaner Head) to the end of the wand until it clicks.
3. For handheld use, remove the wand and attach accessories directly to the main body.

Operating Instructions

Power Modes

The Dyson Cyclone V10 Total Clean+ features three power modes for different cleaning tasks:

• Mode 1 (Suction Mode 1): Provides maximum run time for longer cleans on all floor types.
• Mode 2 (Suction Mode 2): Offers a balance of power and run time for everyday cleaning.
• Boost Mode (Max Suction): Delivers maximum suction for intensive spot cleaning. This mode will significantly reduce battery life.

To change power modes, slide the switch on the top of the main body.

Starting and Stopping

Press and hold the power trigger to start the vacuum. Release the trigger to stop.

Using Attachments

Select the appropriate attachment for your cleaning needs. For example, use the Soft Roller Cleaner Head for hard floors, the Mini Motorized Tool for upholstery, and the Crevice Tool for tight spaces. Attachments click securely onto the wand or directly onto the main body.

Maintenance

Emptying the Dust Bin

Empty the dust bin as soon as the dirt reaches the MAX level.

1. Hold the vacuum over a trash bin.
2. Push the red lever forward to release the bin flap and eject the dirt.
3. Close the bin flap firmly until it clicks.

Washing the Filter

Wash the filter at least once a month, or more frequently if used heavily.

1. Twist the filter counter-clockwise from the top of the main body and remove it.
2. Wash the filter under cold running water until the water runs clear.
3. Squeeze and twist the filter to remove excess water.
4. Leave the filter to dry completely for at least 24 hours in a warm, dry place with good airflow. Do not use a tumble dryer, microwave, or open flame.
5. Once completely dry, replace the filter by twisting it clockwise until it clicks into place.

Clearing Blockages

If the vacuum loses suction, check for blockages in the cleaner head, wand, and main body.

• Turn off and unplug the vacuum before checking for blockages.
• Remove any visible debris.
• If the cleaner head brush bar is blocked, refer to the specific instructions for removing and cleaning the brush bar.

Troubleshooting

Specifications

Warranty Information

Dyson offers a manufacturer's warranty for the Dyson Cyclone V10 Total Clean+. Please refer to the warranty card included with your product or visit the official Dyson website for detailed terms and conditions regarding your specific model and region.

• Typical Warranty Period: Dyson cordless vacuums typically come with a 2-year limited warranty covering parts and labor.
• Registration: Register your product online to activate your warranty and receive important updates.
• Proof of Purchase: Retain your proof of purchase for warranty claims.

Customer Support

For further assistance, spare parts, or to schedule a repair, please contact Dyson Customer Support.

• Online Support: Visit the official Dyson support website for FAQs, video guides, and online chat.
• Telephone Support: Refer to your product packaging or the Dyson website for local contact numbers.
• Service Centers: Information on authorized service centers can be found on the Dyson website.