1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your RecPro RV Air Conditioner 15K. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the unit. This unit is designed for use in RVs, campers, fifth wheels, and food trucks, offering both cooling and heating capabilities.
2. Key Features
- Energy-Efficient Low Amp Draw: Designed to allow multiple RV appliances to operate simultaneously without overloading the system, ideal for various power setups.
- Rugged, Durable Design: Constructed from UV-resistant plastic for durability and an aerodynamic profile to reduce drag.
- Ultra-Quiet Operation: Operates at approximately 55.4 dB, providing a peaceful environment.
- Multi-Function Remote + LED Touch Display: Offers full control with a wireless remote and an intuitive LED panel for various modes (cool, dry, fan, sleep, timer). No thermostat wiring required.
- Built-In Heat Pump: Provides 4-season comfort by offering supplemental warmth in addition to powerful cooling.
- Ducted and Non-Ducted Compatibility: Versatile design compatible with both ducted and non-ducted RV airflow systems.
3. Setup and Installation
The RecPro RV Air Conditioner is designed for straightforward installation. It fits standard 14" x 14" vent openings.
Installation Steps:
- Secure AC Unit to Roof: Position and secure the exterior air conditioner unit onto the RV rooftop, aligning it with the 14" x 14" vent opening.
- Connect Power to AC Unit: Connect the necessary electrical wiring to the AC unit. Ensure all connections are secure and follow local electrical codes.
- Connect & Install Plenum: From inside the RV, connect the interior plenum to the exterior unit. Secure the plenum in place, ensuring a tight seal for optimal airflow.
Note: Professional installation is recommended if you are unfamiliar with RV electrical systems or rooftop installations.
4. Operating Instructions
Your RecPro RV Air Conditioner can be controlled using the included wireless remote or the integrated LED touch display on the interior plenum.
Remote Control Functions:
- Power On/Off: Activates or deactivates the unit.
- Mode Selection: Cycle through Cool, Dry, Fan, Sleep, and Heat Pump modes.
- Temperature Adjustment: Increase or decrease the desired temperature setting.
- Fan Speed: Adjust fan speed (Low, Medium, High, Auto).
- Timer Function: Set a timer for automatic power on or off.
- Sleep Mode: Optimizes settings for quiet and comfortable overnight operation.
The LED display on the interior plenum provides real-time feedback on the current settings and status of the unit.
5. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your RV air conditioner.
Air Filter Cleaning:
The air filter should be regularly inspected and cleaned to maintain efficient airflow and cooling performance. The filter is designed for easy removal and cleaning.
- Locate the air filter access on the interior plenum.
- Gently remove the filter.
- Clean the filter using mild soap and water, or vacuum off dust and debris.
- Allow the filter to dry completely before reinserting it.
Note: The manufacturer recommends checking the air filter monthly during periods of frequent use.
6. Troubleshooting
If you encounter issues with your RecPro RV Air Conditioner, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on. | No power supply; remote control battery low. | Check power connection and circuit breaker. Replace remote control batteries. |
| Insufficient cooling/heating. | Dirty air filter; blocked air vents; incorrect mode selection. | Clean air filter. Ensure vents are unobstructed. Verify correct mode (Cool/Heat) is selected. |
| Unusual noise during operation. | Loose components; debris in fan. | Inspect for loose parts. Turn off unit and check for debris in fan area. If noise persists, contact support. |
| Remote control not responding. | Low or dead batteries; obstruction between remote and unit. | Replace batteries. Ensure clear line of sight to the unit's receiver. |
For issues not listed here, please contact RecPro customer support.
7. Specifications
| Attribute | Detail |
|---|---|
| Brand Name | RecPro |
| Model Info | RP-AC3800 |
| Item Weight | 112 pounds |
| Product Dimensions | 39.5 x 25.5 x 13.5 inches |
| Efficiency | Efficient |
| Capacity | 351 Cubic Feet |
| Annual Energy Consumption | 5694 Kilowatt Hours Per Year |
| Noise Level | 59.1 dB |
| Installation Type | Packaged |
| Form Factor | RV Rooftop |
| Special Features | Remote Controlled, Dehumidifier |
| Heating Elements | 1 |
| Color | White |
| Voltage | 115 Volts |
| Wattage | 1500 watts |
| Material Type | Non-Ducted |
| Included Components | Exterior Shroud, Interior Plenum |
| Floor Area | 835 Square Feet |
| Cooling Power | 15000 British Thermal Units |
| Refrigerant | R 410A |
8. Warranty and Support
For warranty information and customer support, please refer to the official RecPro website or contact their customer service directly. Keep your purchase receipt for warranty claims.
RecPro Customer Service: Visit RecPro Contact Page