1. Product Overview
The AREBOS Inflatable Spa is designed for both indoor and outdoor use, providing a relaxing hydro-massage experience for up to four people. Featuring 100 powerful air jets and an adjustable water temperature up to 40°C, this spa offers comfort and convenience with its automatic inflation function and efficient filtration system.
Image: The AREBOS Inflatable Spa, ready for use on a wooden patio.
2. Safety Instructions
Read and follow all safety instructions carefully to prevent injury and damage.
- Electrical Safety: Always connect the spa to a grounded power outlet. Do not use extension cords. Keep all electrical components dry.
- Water Safety: Do not operate the spa if the water temperature exceeds 40°C (104°F). Supervise children at all times. Do not dive or jump into the spa.
- Chemical Safety: Handle spa chemicals according to manufacturer's instructions. Store chemicals in a cool, dry place, away from children and pets.
- Installation: Ensure the spa is placed on a flat, stable, and level surface capable of supporting the weight of the filled spa and occupants.
- Maintenance: Regularly inspect the spa for damage. Do not use the spa if it is damaged.
- Health Considerations: Consult a doctor before use if you have health conditions, are pregnant, or are elderly. Limit soak time to avoid overheating.
3. Package Contents
Verify that all components listed below are included in your package:
- Inflatable Spa Unit
- Insulated Cover with Safety Clips
- Filter Cartridge
- Inflation Hose
- Repair Patch Kit
- Drain Plug/Cap
- Filter Wrench
- User Manual
Image: Contents of the AREBOS Inflatable Spa package, including the spa unit, cover, filter, and accessories.
4. Setup
- Site Selection: Choose a flat, level, and stable surface that can support the weight of the filled spa (approx. 600 kg + occupants). Ensure adequate drainage and proximity to a grounded power outlet.
- Unpacking: Carefully remove the spa and all components from the packaging. Spread the ground cloth (if included, or use your own) on the chosen site.
- Inflation: Connect the inflation hose to the spa's inflation valve and the control unit's air pump outlet. The spa features an automatic inflation function; simply plug in the unit and activate the inflation mode. Inflate until firm, but do not overinflate.
- Control Unit Connection: Connect the control unit to the spa unit securely.
- Filter Installation: Screw the filter cartridge into the filter housing inside the spa.
- Filling with Water: Fill the spa with fresh water using a garden hose, ensuring the water level is between the MIN and MAX lines indicated inside the spa.
Image: Connecting the inflation hose for automatic inflation.
5. Operating
The control panel allows you to manage all spa functions.
Image: The control panel of the AREBOS Inflatable Spa.
- Power Button: Press to turn the spa control unit on or off.
- Temperature Adjustment: Use the "Temp Up" and "Temp Down" buttons to set your desired water temperature (up to 40°C). The heater will automatically activate to reach and maintain the set temperature.
- Bubble Jet Activation: Press the "Bubble" button to activate the 100 air jets for a relaxing massage. Press again to turn off.
- Filter System: Press the "Filter" button to activate the filtration system. It is recommended to run the filter daily to maintain water clarity.
- Heating Function: The "Heater" indicator light will illuminate when the heating function is active. The system includes an automatic stop and standby modes for safety and energy efficiency.
6. Maintenance
Regular maintenance is essential for the longevity and hygiene of your spa.
- Water Quality: Test water pH and chemical levels regularly (daily or every other day). Adjust chemicals as needed to maintain proper balance (e.g., chlorine, pH balancers).
- Filter Cartridge:
- Cleaning: Remove the filter cartridge and rinse it with a garden hose every few days, or more frequently with heavy use.
- Replacement: Replace the filter cartridge every 1-2 months, or when it can no longer be cleaned effectively. The control unit may have a filter alarm function.
- Draining and Cleaning: Drain the spa completely every 1-3 months, depending on usage. Clean the interior surfaces with a mild, non-abrasive cleaner and rinse thoroughly.
- Spa Cover: Keep the insulated cover on the spa when not in use to retain heat and keep debris out. Clean the cover regularly.
- Winterization/Storage: For long-term storage, especially in cold climates, completely drain, clean, and dry the spa. Deflate it and store it in a dry, protected area, away from extreme temperatures.
Image: The AREBOS Inflatable Spa with its protective cover installed.
7. Troubleshooting
Refer to this section for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Spa not heating. | Heater not activated, low water level, dirty filter, ambient temperature too low. | Ensure heater is on. Check water level. Clean or replace filter. Ensure spa is covered. |
| Jets not working. | Bubble function off, air pump issue. | Press the "Bubble" button. Check power connection. |
| Water is cloudy/dirty. | Dirty filter, improper chemical balance, heavy use. | Clean or replace filter. Test and adjust water chemicals. Run filter longer. |
| Spa is deflating. | Leak in spa body, valve not sealed properly. | Locate the leak (use soapy water) and apply repair patch. Ensure all valves are tightly closed. |
8. Specifications
| Model Number | AR-HE-SPA4SAH |
| Brand | Arebos |
| Dimensions (L x W x H) | 154 x 154 x 65 cm (60.6 x 60.6 x 25.6 inches) |
| Weight | 21 kg (46.3 lbs) |
| Material | Polyvinyl Chloride (PVC) |
| Capacity | 600 Litres (158.5 Gallons) |
| Voltage | 240 Volts |
| Number of Jets | 100 |
| Seating Capacity | 4 Persons |
9. Warranty and Support
For warranty information, technical support, or spare parts inquiries, please contact the manufacturer or your retailer directly. Keep your purchase receipt as proof of purchase.
Manufacturer: Canbolat Vertriebs GmbH
