1. Introduction
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Sabiana CARISMA FLY fan coil unit. Please read this manual thoroughly before installing or operating the unit and keep it for future reference.
The Sabiana CARISMA FLY fan coil unit is designed to provide heating and cooling for various indoor environments, ensuring optimal thermal comfort. This model, CVP-T 3V, offers a heat output of 3 kW.
2. Safety Information
WARNING: Failure to follow these safety instructions could result in electric shock, fire, serious injury, or death.
- Installation and maintenance must be performed by qualified personnel only, in accordance with all local and national electrical and building codes.
- Ensure the power supply is disconnected before performing any maintenance or service.
- Do not operate the unit with wet hands or when standing in water.
- Keep children and pets away from the unit during operation.
- Do not insert objects into the air inlet or outlet grilles.
- Ensure proper grounding of the unit.
- Do not block the air flow to or from the unit.
3. Product Overview
The Sabiana CARISMA FLY fan coil unit is a wall-mounted device designed for efficient climate control. Its compact design integrates seamlessly into various interior spaces.
Figure 3.1: Front view of the Sabiana CARISMA FLY fan coil unit. This image shows the compact, white rectangular casing of the unit, designed for wall mounting. The air outlet grille is visible along the bottom edge, featuring multiple horizontal slats for air distribution.
Components:
- Casing: Durable, aesthetically pleasing outer shell.
- Fan: Circulates air through the coil.
- Coil: Heat exchanger for heating or cooling.
- Air Filter: Removes dust and particles from the air.
- Control Panel/Remote Receiver: For setting operation modes and temperature.
4. Setup and Installation
Installation should only be performed by a certified HVAC technician. Refer to the detailed installation guide provided separately for specific wiring diagrams and mounting instructions.
4.1. Pre-installation Checklist:
- Verify power supply (230V AC) matches unit requirements.
- Ensure adequate space for air circulation around the unit.
- Confirm wall structure can support the unit's weight (approx. 50 kg).
- Have necessary tools and safety equipment.
4.2. Mounting:
The unit is designed for wall mounting. Use appropriate anchors and screws to secure the mounting bracket firmly to the wall. Ensure the unit is level to allow for proper condensate drainage.
4.3. Electrical Connection:
Connect the unit to a dedicated 230V AC power circuit. Ensure all wiring is done according to local electrical codes and the unit's wiring diagram. Proper grounding is essential.
4.4. Water Connections:
Connect the water inlet and outlet pipes to the unit's coil. Ensure all connections are watertight and properly insulated to prevent condensation.
5. Operating Instructions
The Sabiana CARISMA FLY unit can be controlled via its integrated control panel or a compatible remote control (if supplied).
5.1. Powering On/Off:
Press the POWER button to turn the unit on or off. The unit will typically resume its last operating mode.
5.2. Mode Selection:
Press the MODE button to cycle through available operating modes:
- Heating: Provides warm air (indicated by a sun icon or "HEAT").
- Cooling: Provides cool air (indicated by a snowflake icon or "COOL").
- Fan Only: Circulates air without heating or cooling (indicated by a fan icon).
5.3. Temperature Adjustment:
Use the UP (▲) and DOWN (▼) arrows to set your desired temperature. The display will show the set temperature.
5.4. Fan Speed Control:
Press the FAN SPEED button to adjust the fan speed. Options typically include Low, Medium, High, and Auto. Auto mode adjusts fan speed based on the temperature difference between the room and the set point.
6. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your unit. Always disconnect power before performing maintenance.
6.1. Air Filter Cleaning:
The air filter should be cleaned every 2-4 weeks, or more frequently depending on usage and air quality.
- Turn off the unit and disconnect power.
- Open the front panel of the unit.
- Carefully remove the air filter.
- Clean the filter with a vacuum cleaner or wash it with lukewarm water and mild detergent. Rinse thoroughly.
- Allow the filter to dry completely before reinserting.
- Close the front panel and reconnect power.
6.2. Coil Cleaning:
The heat exchange coil should be inspected annually and cleaned by a qualified technician if dust or debris buildup is observed.
6.3. Drain Pan and Pipe Cleaning:
Periodically check the condensate drain pan and pipe for blockages. Clean as necessary to prevent water overflow.
6.4. General Cleaning:
Wipe the exterior of the unit with a soft, damp cloth. Do not use abrasive cleaners or solvents.
7. Troubleshooting
Before contacting customer support, please refer to the following common issues and their solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on. | No power supply; circuit breaker tripped. | Check power connection; reset circuit breaker. |
| Insufficient heating/cooling. | Dirty air filter; blocked air vents; incorrect mode setting. | Clean air filter; ensure vents are clear; select correct operating mode. |
| Unusual noise. | Loose components; fan obstruction. | Contact a qualified technician for inspection. |
| Water leakage. | Blocked condensate drain pipe/pan. | Clean drain pan and pipe. If issue persists, contact technician. |
If the problem persists after attempting these solutions, please contact a qualified service technician.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | SABIANA |
| Model Number | 0025223 |
| Product Type | Fan Coil Unit |
| Voltage | 230 Volts (AC) |
| Heat Output | 3000 Watts (3 kW) |
| Item Weight | 50 Kilograms |
| Mounting Type | Wall Mount |
9. Warranty and Support
For warranty information, please refer to the warranty card included with your product or visit the official Sabiana website. Keep your proof of purchase for warranty claims.
For technical support or service, please contact your authorized Sabiana dealer or service center. Ensure you have your model number (0025223) and serial number ready when contacting support.
Spare parts availability information is not provided in the product data.