CURT Grip Step Hitch Step Instruction Manual

Product Overview

The CURT Grip Step receiver hitch step, model 32002, is engineered to provide a stable and secure stepping platform for easier access to your vehicle's front or rear. It is designed for use with standard 2-inch x 2-inch receiver hitches. Its construction features expanded aluminum treads for maximum traction and a durable powder-coated aluminum finish for corrosion resistance.

Key features include:

• Provides a 26-inch hitch-mounted step for vehicle access.
• Hitch-mounted design allows for use-as-needed installation.
• Features a 6-inch drop for enhanced bumper clearance and easier access into larger or lifted vehicles.
• Expanded metal treads ensure maximum traction and safety, while allowing dirt and debris to pass through.
• Constructed from lightweight, corrosion-resistant aluminum with a black powder coat finish.

Image: The CURT 32002 Grip Step Hitch Step, showcasing its design and textured surface.

Safety Information

Before installation and use, read and understand all instructions. Failure to follow these instructions could result in serious injury or property damage.

• Always ensure the hitch step is securely installed with the appropriate hitch pin and clip before use.
• Do not exceed the weight capacity of your vehicle's receiver hitch or the hitch step itself.
• Exercise caution when stepping on or off the unit, especially in wet or icy conditions.
• Regularly inspect the hitch step for any signs of wear, damage, or corrosion. Do not use if damaged.
• Be aware of the step's presence when backing up or maneuvering your vehicle, especially in tight spaces or over uneven terrain, to avoid striking obstacles.

What's in the Box

Your CURT Grip Step Hitch Step package should contain the following components:

• Grip Step Hitch Step (Model 32002)
• Hitch Pin (typically included, verify upon receipt)

Please inspect all components upon receipt to ensure nothing is missing or damaged.

Setup and Installation

The CURT Grip Step is designed for quick and straightforward installation into any standard 2-inch x 2-inch receiver hitch.

1. Ensure your vehicle's receiver hitch is clean and free of debris.
2. Slide the shank of the Grip Step into the receiver tube of your vehicle's hitch. The 6-inch drop design will position the step lower for easier access.
3. Align the pin holes on the hitch step shank with the pin holes on your receiver hitch.
4. Insert the hitch pin through the aligned holes.
5. Secure the hitch pin with the provided clip or locking mechanism.
6. Gently pull on the step to ensure it is firmly seated and does not wobble excessively.

For visual reference on dimensions and features:

Image: Diagram showing the approximate dimensions of the CURT Grip Step, including its 26-inch length, 7-inch width, and 6-inch drop.

Image: Visual representation highlighting key features such as expanded aluminum treads, 7-inch wide stepping surface, and 6-inch drop.

Watch the official product video for an overview of the CURT Grip Step:

Operating Instructions

Once installed, the CURT Grip Step provides a convenient access point for your vehicle. It can be used for:

• Accessing Truck Bed or Cargo Area: Step onto the platform to easily reach items in your truck bed or cargo space.
• Vehicle Maintenance: Use the step to gain better access to the engine bay or windshield for cleaning and maintenance tasks.

Always maintain three points of contact (two hands and one foot, or one hand and two feet) when using the step to ensure stability.

Image: A representative image showing the CURT Grip Step installed on the rear hitch of a vehicle, demonstrating its function as a step.

Maintenance

To ensure the longevity and continued performance of your CURT Grip Step, follow these maintenance guidelines:

• Regular Cleaning: The open tread design allows dirt and debris to pass through, but occasional cleaning with water and mild soap will help maintain its appearance and prevent buildup. Rinse thoroughly.
• Inspect for Damage: Periodically check the step for any signs of bending, cracks, or significant wear on the aluminum treads or the powder coat finish.
• Check Hitch Connection: Ensure the hitch pin and clip remain secure and are not corroded or damaged. Replace if necessary.
• Corrosion Prevention: While the step is corrosion-resistant, prolonged exposure to road salt or harsh chemicals can affect the finish. Clean promptly after such exposure.

Image: A close-up view of the corrosion-resistant powder coat finish on the CURT Grip Step, highlighting its protective layer.

Troubleshooting

If you encounter issues with your CURT Grip Step, consider the following common troubleshooting steps:

• Step Feels Loose: Ensure the hitch pin is fully inserted and secured with the clip. Check if the receiver hitch or the step's shank has any excessive play. Some minor movement is normal, but significant looseness may indicate an incorrect hitch size or worn components.
• Difficulty Inserting/Removing: Ensure the receiver hitch is clean and free of rust or debris. A small amount of lubricant on the shank can aid insertion.
• Corrosion/Rust Appears: While designed to be corrosion-resistant, extreme conditions can cause issues. Clean affected areas immediately. If the powder coat is chipped, consider touch-up paint to prevent further corrosion.
• Damaged Treads: If the expanded metal treads are bent or damaged, the step's traction and safety may be compromised. Discontinue use and consider replacement.

Specifications

Warranty and Support

For specific warranty information regarding your CURT Grip Step Hitch Step, please refer to the documentation included with your product at the time of purchase or visit the official CURT Manufacturing website. Warranty terms and conditions may vary.

For technical support, replacement parts, or further assistance, please contact CURT customer service directly through their official website or the contact information provided in your product packaging.