Nikai NWM1350T5 Semi-Automatic Washing Machine User Manual

1. Introduction

This user manual provides essential information for the safe and efficient operation, installation, maintenance, and troubleshooting of your Nikai NWM1350T5 Semi-Automatic Washing Machine. Please read this manual thoroughly before using the appliance and retain it for future reference.

2. Safety Instructions

• Ensure the washing machine is connected to a grounded power outlet with the correct voltage (240 Volts).
• Do not operate the machine with a damaged power cord or plug.
• Keep children and pets away from the appliance during operation.
• Do not wash items that are soiled with flammable substances.
• Always unplug the machine before cleaning or performing any maintenance.
• Do not immerse the electrical parts in water.
• Ensure the drain hose is properly positioned to prevent water leakage.
• Avoid overloading the machine beyond its 12 Kg capacity.

3. Product Overview

The Nikai NWM1350T5 is a 12 Kg semi-automatic, top-load washing machine designed for efficient laundry care. It features separate wash and spin tubs, offering flexibility in washing cycles.

Figure 1: Nikai NWM1350T5 Washing Machine
This image displays the Nikai NWM1350T5 semi-automatic washing machine. It features a silver exterior with a blue and grey control panel located on the top front. The control panel includes buttons for 'Fuzzy', 'Handwash', 'Water level', 'Program', 'Start/Pause', and 'Power', along with a digital display. The machine has a top-loading design with a lid that covers the wash and spin tubs. The overall design is compact and functional.

Control Panel Features:

• Power Button: Turns the machine on or off.
• Start/Pause Button: Initiates or temporarily stops the selected cycle.
• Program Selector: Dial or buttons to choose washing programs (e.g., Standard, Gentle, Soak).
• Water Level Selector: Adjusts the water level according to the laundry load.
• Wash Timer: Sets the duration of the wash cycle.
• Spin Timer: Sets the duration of the spin cycle.
• Drain Selector: Manually drains water from the wash tub.

4. Setup and Installation

4.1 Unpacking

Carefully remove all packaging materials. Inspect the machine for any damage incurred during transit. Retain packaging for potential future transport or service.

4.2 Placement

• Place the washing machine on a firm, level surface to minimize vibration and noise during operation.
• Ensure adequate ventilation around the machine. Do not block air vents.
• Avoid direct sunlight or placement near heat sources.

4.3 Water Connection

• Connect the water inlet hose to a cold water tap. Ensure a tight connection to prevent leaks.
• Position the drain hose to allow for proper water discharge. It should be placed in a sink or a dedicated drain pipe, ensuring it is not kinked or blocked.

4.4 Power Connection

Plug the power cord into a grounded 240 Volt electrical outlet. Do not use extension cords or adapters.

5. Operating Instructions

5.1 Preparing Laundry

• Sort laundry by fabric type, color, and degree of soiling.
• Empty pockets and close zippers or hooks to prevent damage.
• For delicate items, consider using a laundry bag.

5.2 Washing Cycle

1. Open the wash tub lid and load the sorted laundry. Do not exceed the 12 Kg capacity.
2. Add the appropriate amount of detergent to the wash tub.
3. Fill the wash tub with water to the desired level using the water inlet. You can also use the 'Water level' selector if available for automatic filling.
4. Select the desired wash program (e.g., 'Fuzzy' for general wash, 'Handwash' for delicate items) and set the wash timer.
5. Press the 'Start/Pause' button to begin the wash cycle.
6. Once the wash cycle is complete, set the drain selector to 'Drain' to empty the water.

5.3 Rinsing Cycle

1. After draining the wash water, refill the wash tub with clean water.
2. Run a short wash cycle (e.g., 3-5 minutes) to rinse the clothes.
3. Drain the rinse water. Repeat if necessary for thorough rinsing.

5.4 Spin Cycle

1. Carefully transfer the rinsed laundry from the wash tub to the spin tub. Distribute the load evenly to prevent imbalance.
2. Place the safety cover over the laundry in the spin tub.
3. Close the spin tub lid securely.
4. Set the spin timer to the desired duration (e.g., 5-10 minutes). The maximum rotational speed is 1300 RPM.
5. Press the 'Start/Pause' button to begin the spin cycle.
6. Once the spin cycle is complete, wait for the tub to stop completely before opening the lid and removing the laundry.

6. Maintenance and Care

6.1 Cleaning the Exterior

Wipe the exterior of the machine with a soft, damp cloth. Do not use abrasive cleaners or solvents.

6.2 Cleaning the Lint Filter

Regularly clean the lint filter located inside the wash tub. Remove the filter, clean it under running water, and reinsert it securely.

6.3 Draining Residual Water

After each use, ensure all water is drained from both tubs to prevent odor and mildew buildup.

7. Troubleshooting

8. Specifications

• Model: NWM1350T5
• Brand: Nikai
• Type: Semi-Automatic Washing Machine
• Capacity: 12 Kilograms
• Operation Mode: Semi Automatic
• Style: Top Load
• Color: Silver
• Material: Plastic
• Voltage: 240 Volts
• Maximum Rotational Speed: 1300 RPM
• Product Dimensions (L x W x H): 69 x 69 x 109 cm
• Special Features: Portable
• Cycle Options: Drain, Rinse, Spin
• Human Interface Input: Dial

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your purchase or contact Nikai customer service directly. Keep your purchase receipt as proof of purchase.