1. Introduction
This manual provides comprehensive instructions for the ALLIMITY N2QAYB000986 replacement remote control. It is designed to operate various Panasonic Blu-Ray Player models, offering a direct and functional alternative to your original remote.
Please read this manual carefully before use to ensure proper operation and to familiarize yourself with all features.
2. Product Overview
The ALLIMITY N2QAYB000986 remote control is an infrared (IR) device designed for ease of use. It replicates the functionality of the original Panasonic remote, providing access to all essential features of your Blu-Ray player.
Image 1: Front view of the ALLIMITY N2QAYB000986 remote control. This image displays the full layout of buttons, including power, input selection, volume, channel, numeric keypad, navigation, playback controls, and specific Blu-Ray functions.
Compatible Models:
- DMR-BCT74ENK
- DMR-BCT845EG
- DMR-BCT84ENS
- DMR-BCT940EG
- DMR-BST845EG
- DMR-BWT745
- DMR-BCT740EG
- DMR-BCT84EN
- DMR-BCT940
- DMR-BST745EG
- DMR-BST940EG
- DMR-BWT745EC
This remote is designed to be compatible with the listed Panasonic Blu-Ray Player models. If your model is not listed, please verify compatibility before use.
3. Setup
3.1. Battery Installation
The remote control requires two (2) AAA batteries (not included) for operation.
- Locate the battery compartment cover on the back of the remote control.
- Slide the cover downwards or press the latch and lift to open.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals match the diagrams inside the compartment.
- Replace the battery compartment cover, sliding it back into place until it clicks securely.
Note: Ensure batteries are inserted correctly. Incorrect insertion may prevent the remote from functioning. Remove batteries if the remote will not be used for an extended period to prevent leakage.
Image 2: Angled view of the ALLIMITY N2QAYB000986 remote control. This perspective highlights the ergonomic design and the placement of the battery compartment on the rear.
3.2. Initial Use
No programming is typically required for this replacement remote. Once batteries are installed, point the remote control directly at your Panasonic Blu-Ray Player and begin operation.
4. Operating Instructions
This section outlines the primary functions of the remote control buttons.
| Button | Function |
|---|---|
| POWER | Turns the Blu-Ray Player On/Off. |
| INPUT SELECT / DRIVE SELECT | Switches between input sources or disc drives. |
| VOL +/- | Adjusts the volume level. |
| CH +/- | Changes channels (if applicable to your player's TV tuner function). |
| Numeric Keypad (0-9) | Direct input for channel numbers, track selection, or menu options. |
| PLAY / PAUSE / STOP | Standard media playback controls. |
| SKIP / REWIND / FAST FORWARD | Navigation within media content. |
| GUIDE | Accesses the electronic program guide. |
| DIRECTIONAL PAD (Up, Down, Left, Right) & OK | Navigates through menus and confirms selections. |
| POP-UP MENU / DIRECT NAVIGATOR | Opens disc-specific or system menus. |
| FUNCTION MENU | Accesses additional player functions. |
| OPTION / RETURN / EXIT | Provides context-sensitive options, returns to previous screen, or exits menus. |
| REC / REC MODE | Controls recording functions (if supported by your player). |
| TEXT / STTL / AUDIO | Accesses teletext, subtitles, or audio track options. |
| -10s / +60s (MANUAL SKIP) | Skips backward by 10 seconds or forward by 60 seconds. |
For detailed functionality of each button, refer to your Panasonic Blu-Ray Player's original user manual.
5. Maintenance
5.1. Cleaning
To clean the remote control, use a soft, dry cloth. Do not use liquid cleaners, abrasive pads, or chemical solvents, as these may damage the surface or internal components.
5.2. Battery Replacement
Replace batteries when the remote's response becomes sluggish or stops working. Always replace both batteries at the same time with new AAA batteries. Do not mix old and new batteries, or different types of batteries.
6. Troubleshooting
- Remote not responding:
- Ensure there is a clear line of sight between the remote and the Blu-Ray player.
- Check if the batteries are inserted correctly with the correct polarity (+/-).
- Replace old batteries with new AAA batteries.
- Verify that the remote is compatible with your specific Panasonic Blu-Ray Player model.
- Buttons not working correctly:
- Ensure the remote is pointed directly at the Blu-Ray player.
- Clean the remote's surface and buttons with a dry cloth to remove any debris.
- If only specific buttons are unresponsive, it might indicate a fault with the remote.
- Interference:
- Bright light sources (e.g., direct sunlight, fluorescent lights) can interfere with infrared signals. Try operating the remote in a different lighting condition.
- Other electronic devices might cause interference. Move them away if possible.
If issues persist after following these steps, contact customer support for further assistance.
7. Specifications
- Model: N2QAYB000986
- Brand: ALLIMITY
- Connectivity Technology: Infrared (IR)
- Power Source: 2 x AAA Batteries (not included)
- Maximum Range: Approximately 10 meters (33 feet)
- Special Feature: Ergonomic design
- Compatible Devices: Panasonic Blu-Ray Players (specific models listed in Section 2)
8. Warranty and Support
This product is typically covered by a standard manufacturer's warranty. Please refer to the seller's return policy or contact the point of purchase for specific warranty details and duration.
For technical support or further inquiries, please contact ALLIMITY customer service or the retailer from whom you purchased the product. Keep your purchase receipt as proof of purchase.
Information regarding spare parts availability and software updates is not available for this product.
