1. Important Safety Instructions
To reduce the risk of fire, electric shock, or injury, observe the following:
- Read all instructions thoroughly before installation and operation.
- Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards.
- Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair.
- Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel burning equipment to prevent back-drafting.
- When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.
- Always turn off power to the range hood at the service panel before servicing or cleaning.
- Clean grease filters frequently. Grease should not be allowed to accumulate on fan or filter.
2. Product Overview
The Ancona AN-1536 is a 36-inch wall mount range hood designed to efficiently remove smoke, moisture, and cooking odors from your kitchen. It features a powerful motor, LED lighting, and easy-to-clean baffle filters.
2.1 Components Included
- Range Hood Unit
- Baffle Filters
- Damper Flap
- LED Lights (pre-installed)
- Installation Manual & Warranty Sheet
2.2 Key Features
- 36-inch Wall Mount glass canopy range hood.
- High grade 430 stainless steel construction.
- 600 CFM (Cubic Feet Per Minute) airflow capacity, cETLus approved.
- Pure Lights 2 x 1.5-Watt LED lights for bright and eco-friendly illumination.
- 3-speed LCD electronic touch control panel for ease of use.
- Time delay auto shut-off function to remove lingering odors.
- Commercial style stainless steel baffle filters, dishwasher safe.
- Convertible to an internal recirculation unit with a separately purchased filter kit.
Image 2.2.1: Front view of the Ancona AN-1536 range hood, showcasing its stainless steel body and glass canopy.
Image 2.2.2: The Ancona AN-1536 range hood installed above a stove in a modern kitchen setting.
3. Specifications
Detailed technical specifications for the Ancona AN-1536 range hood.
| Specification | Value |
|---|---|
| Model Number | AN-1536 |
| Air Flow Capacity | 600 Cubic Feet Per Minute (CFM) |
| Material | Stainless Steel |
| Noise Level | 2.1 Sones |
| Mounting Type | Wall Mount |
| Controls Type | Touch |
| Voltage | 120 Volts |
| Number of Speeds | 3 |
| Item Weight | 35.5 Pounds |
| Light Source Type | LED (2 x 1.5-Watt) |
| Wattage | 383 watts |
| Filter Type | Baffle |
| Product Dimensions (D x W x H) | 35.24 x 18.5 x 39.17 inches |
| Ventilation Type | Ductless/Recirculating (convertible) |
| Certification | cETLus |
Image 3.1: Detailed diagram showing the dimensions of the Ancona AN-1536 range hood in inches and centimeters.
4. Setup and Installation
Proper installation is crucial for the performance and safety of your range hood. Consult a qualified installer if you are unsure about any steps.
4.1 Pre-Installation Checklist
- Verify all components are present and undamaged.
- Ensure the wall structure can support the weight of the range hood.
- Confirm electrical supply meets the hood's requirements (120V).
- Determine desired venting method (ducted or recirculating).
- Measure and mark the installation location accurately.
4.2 Mounting the Range Hood
The range hood is designed for wall mounting. Secure the mounting bracket to the wall studs or use appropriate anchors. Ensure the hood is level and securely fastened before proceeding with ductwork and electrical connections.
Image 4.2.1: Side view of the range hood, illustrating the chimney and mounting points for wall installation.
4.3 Ducting Options
The AN-1536 supports both ducted and ductless (recirculating) installations. For ducted installations, connect a 6-inch round duct to the top exhaust outlet and vent it to the outside. For recirculating installations, a conversion filter kit (sold separately) is required to filter and return air to the kitchen.
4.4 Electrical Connection
Connect the range hood to a dedicated 120V, 60Hz electrical circuit. All wiring must comply with local electrical codes. It is recommended to have a qualified electrician perform the electrical connection.
5. Operating Instructions
Familiarize yourself with the control panel for efficient operation of your range hood.
5.1 Control Panel
The range hood features an LCD electronic touch control panel located on the front of the unit. This panel allows you to adjust fan speed, control lighting, and activate the time delay shut-off function.
Image 5.1.1: Close-up view of the touch control panel with icons for fan speed, light, and timer functions.
5.2 Fan Speed Adjustment
Press the fan speed buttons on the control panel to cycle through the 3 available speeds (Low, Medium, High). Select the appropriate speed based on your cooking needs to effectively remove smoke and odors.
5.3 Lighting Control
Press the light button on the control panel to turn the LED lights on or off. The LED lights provide illumination for your cooking surface.
5.4 Time Delay Shut-Off
Activate the time delay shut-off function to allow the hood to continue operating for a set period after cooking, ensuring all lingering odors are removed. Refer to the full manual for specific time settings.
6. Maintenance
Regular maintenance ensures optimal performance and longevity of your range hood.
6.1 Cleaning Baffle Filters
The stainless steel baffle filters should be cleaned regularly to prevent grease buildup. They are dishwasher safe for easy cleaning. Remove filters by pulling the latch and sliding them out. Wash with hot water and detergent or place in a dishwasher. Ensure filters are completely dry before re-installing.
Image 6.1.1: Close-up of the range hood's underside, showing the removable baffle filters and integrated LED lights.
6.2 Cleaning the Exterior
Clean the stainless steel exterior with a soft cloth and a non-abrasive stainless steel cleaner. Avoid using harsh chemicals or abrasive pads that can scratch the surface. Clean the glass canopy with a glass cleaner.
6.3 LED Light Replacement
The LED lights are designed for long life. If replacement is necessary, contact customer support for compatible replacement parts and instructions.
7. Troubleshooting
Refer to this section for common issues and their solutions. If the problem persists, contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Hood does not operate | No power supply; circuit breaker tripped; loose wiring. | Check power connection; reset circuit breaker; ensure all wiring is secure. |
| Poor suction performance | Clogged filters; improper ducting; external air pressure. | Clean or replace filters; check ductwork for obstructions or leaks; ensure proper make-up air. |
| Excessive noise | Loose components; motor imbalance; improper installation. | Check for loose screws or parts; ensure hood is securely mounted and level. |
| Lights not working | Faulty LED module; loose connection. | Check light connections; replace LED module if necessary (contact support). |
8. Warranty and Support
Ancona products are manufactured to high-quality standards and are backed by a limited warranty. Please refer to the warranty sheet included with your product for specific terms and conditions.
For technical assistance, replacement parts, or warranty claims, please contact Ancona customer support. Keep your proof of purchase and model number (AN-1536) ready when contacting support.
Contact Information: Please visit the official Ancona website or refer to your warranty documentation for the most current contact details.
