OSRAM LED STAR CLASSIC P

OSRAM LED STAR CLASSIC P E27 LED Bulb

Instruction Manual

1. Introduction

This manual provides essential information for the safe and efficient use of your OSRAM LED STAR CLASSIC P E27 LED bulb. This LED bulb is designed as an energy-efficient alternative to traditional incandescent bulbs, offering warm white light and a long operational lifespan. Please read these instructions carefully before installation and use.

OSRAM LED STAR CLASSIC P E27 LED Bulb

Image 1: The OSRAM LED STAR CLASSIC P E27 LED bulb, showcasing its compact design.

2. Safety Information

Always observe the following safety precautions:

  • Ensure the power supply is switched off before installing or removing the bulb to prevent electric shock.
  • Do not use the bulb in enclosed fixtures that restrict airflow, as this may shorten its lifespan.
  • This bulb is suitable for outdoor use only when installed in appropriate, sealed light fixtures that protect it from direct weather exposure.
  • Do not disassemble or modify the bulb. There are no user-serviceable parts inside.
  • Avoid touching the bulb immediately after use, as it may still be warm.
  • Dispose of the bulb according to local regulations for electronic waste.

3. Setup and Installation

The OSRAM LED STAR CLASSIC P E27 LED bulb is designed for easy replacement of conventional bulbs with an E27 base.

  1. Turn off Power: Locate the light switch or circuit breaker controlling the fixture and turn off the power supply.
  2. Remove Old Bulb: Carefully unscrew the existing bulb from the light fixture. Allow it to cool if it has been recently in use.
  3. Install New Bulb: Screw the OSRAM LED STAR CLASSIC P E27 LED bulb clockwise into the E27 socket until it is finger-tight. Do not overtighten.
  4. Restore Power: Turn the power supply back on at the switch or circuit breaker.
  5. Test: Turn on the light switch to ensure the bulb is functioning correctly.
OSRAM LED bulb with E27 base

Image 2: Close-up view of the E27 screw base for proper installation.

4. Operating Instructions

This LED bulb operates immediately upon power activation, providing instant full brightness without any warm-up time. It emits a warm white light at 2700 Kelvin, creating a relaxing and comfortable atmosphere suitable for various domestic applications, general lighting, and accent lighting.

  • Power On/Off: Control the bulb using your standard light switch.
  • Voltage: The bulb is designed to operate within a voltage range of 220-240 Volts.
  • Light Output: Provides 470 lumens of warm white light.

5. Maintenance

The OSRAM LED STAR CLASSIC P bulb requires minimal maintenance due to its long lifespan and low heat emission.

  • Cleaning: Ensure the power is off and the bulb is cool before cleaning. Wipe the bulb gently with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • Replacement: Replace the bulb when its light output significantly diminishes or it ceases to function.

6. Troubleshooting

If your OSRAM LED bulb is not functioning as expected, consider the following:

  • Bulb Not Lighting Up:
    • Check if the power switch is on.
    • Ensure the bulb is screwed in securely into the socket.
    • Verify that the light fixture itself is receiving power.
    • Test the bulb in another working fixture to rule out a faulty bulb.
  • Flickering Light:
    • Ensure the bulb is fully tightened in the socket.
    • Check for loose wiring in the fixture (consult a qualified electrician if unsure).
    • This bulb is not specified as dimmable. Using it with a dimmer switch may cause flickering or damage.

7. Specifications

Detailed technical specifications for the OSRAM LED STAR CLASSIC P E27 LED bulb:

FeatureSpecification
Model NameLED STAR CLASSIC P
Bulb BaseE27
Light TypeLED
Wattage5.5 Watts
Incandescent Equivalent40 Watts
Brightness470 Lumens
Light ColorWarm White
Color Temperature2700 Kelvin
Voltage220-240 Volts
Average LifeUp to 15,000 Hours
Energy Consumption6 kWh/1000h
MaterialCopper (base)
Product Dimensions (L x W x H)3.23 x 1.77 x 1.77 inches (82 x 45 x 45 mm)
Mercury FreeYes
ManufacturerLEDVANCE
Dimensions of OSRAM LED bulb

Image 3: Technical drawing showing the dimensions of the bulb (in mm).

OSRAM LED bulb energy efficiency label

Image 4: EU Energy Label for the OSRAM LED bulb, indicating its efficiency class.

For more detailed product information, refer to the EPREL database: https://eprel.ec.europa.eu/qr/523323

8. Warranty and Support

The OSRAM LED STAR CLASSIC P LED bulb is manufactured by LEDVANCE and designed for a long operational life of up to 15,000 hours. For specific warranty details or support inquiries, please refer to the official OSRAM or LEDVANCE website, or contact your point of purchase.

© 2024 OSRAM. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.