Introduction
Thank you for choosing the tectake® Professional 3-Zone Foldable Massage Table. This manual provides essential information for the safe and effective use of your new massage table. Please read these instructions carefully before assembly and use, and retain them for future reference.
Safety Instructions
- Maximum Load Capacity: Do not exceed the maximum working load of 250 kg (551 lbs). The static load capacity is 900 kg (1984 lbs).
- Assembly: Assemble the table carefully according to the provided instructions. Ensure all components are securely fastened before use.
- Stability: Always ensure the table is placed on a flat, stable, and non-slip surface.
- Children and Pets: Keep children and pets away from the table during assembly and use.
- Maintenance: Regularly inspect the table for any signs of wear or damage. Do not use if damaged.
- Cleaning: Use only mild cleaning agents suitable for vinyl surfaces. Avoid abrasive cleaners.
Package Contents
Verify that all parts are present and undamaged before proceeding with assembly.
- 1x Foldable Massage Table
- 1x Removable Ergonomic Headrest
- 2x Removable Armrests
- 1x Transport Bag
Figure 1: Overview of package contents and technical specifications.
Setup Instructions
- Unfolding the Table:
Place the folded massage table on a flat surface. Release the latches on the side. Carefully unfold the table legs until they are fully extended and locked into place. Ensure the plastic-coated steel cables are taut and secure.
Figure 2: Unfolding and folding mechanism for easy setup and storage.
- Attaching the Headrest:
Locate the opening at one end of the table. Insert the ergonomic headrest into the designated slots. Secure it using the Velcro closure. The headrest angle can be adjusted for client comfort.
- Attaching the Armrests:
Slide the two armrests into the receptacles located on the sides of the table, near the headrest. The distance of the armrests can be continuously adjusted for optimal positioning.
- Adjusting Table Height:
The table height can be adjusted from approximately 68 cm to 90 cm in 3 cm increments. To adjust, locate the adjustment knobs on each leg, loosen them, set the desired height, and securely tighten the knobs. Ensure all legs are set to the same height for stability.
Figure 3: Table height adjustment mechanism.
- Adjusting the Footrest/Backrest:
The 3-zone design allows for adjustment of the footrest/backrest section. Use the adjustment levers to set the desired angle for client comfort or specific treatment requirements.
Figure 4: Adjustable backrest and headrest for customized comfort.
Operating Instructions
Once assembled and adjusted, the tectake® massage table is ready for use. Ensure the client is positioned comfortably and safely on the table.
- Client Positioning: Guide the client to lie down on the table. Utilize the removable face opening for prone positions. The comfortable armrests provide support for the arms.
- Adjustments During Use: Minor adjustments to the headrest, armrests, or backrest can be made while the client is on the table, provided it is done carefully and does not compromise stability.
- Folding for Transport: To fold the table, remove all accessories (headrest, armrests). Loosen the leg adjustments and collapse the legs. Fold the table in half and secure it with the latches. Place it in the transport bag for easy carrying.
Figure 5: The 3-zone massage table in use, highlighting key features.
Maintenance
- Cleaning the Upholstery: The vinyl upholstery is resistant to water and oil. Clean regularly with a damp cloth and mild soap. Avoid harsh chemicals or abrasive materials that could damage the surface. The removable headrest cushion can be cleaned separately.
- Frame and Legs: Wipe the aluminum frame and legs with a damp cloth. Ensure all moving parts are free from debris.
- Inspection: Periodically check all screws, bolts, and cables for tightness and wear. Tighten any loose fasteners. Replace any worn or damaged parts immediately.
- Storage: When not in use, fold the table and store it in its transport bag in a dry, cool place away from direct sunlight and extreme temperatures.
Figure 6: High-quality materials ensure durability and easy maintenance.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Table is unstable or wobbly. | Legs not fully extended or locked; uneven surface; loose fasteners. | Ensure all legs are fully extended and locked. Place table on a flat surface. Check and tighten all fasteners. |
| Difficulty folding/unfolding the table. | Cables caught; latches not fully released/engaged. | Check that the plastic-coated steel cables are not caught in any mechanism. Ensure latches are fully released before unfolding and fully engaged when folded. |
| Height adjustment is difficult. | Adjustment knobs too tight; debris in leg mechanism. | Loosen adjustment knobs sufficiently. Inspect leg mechanisms for any obstructions and clean if necessary. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 800052 |
| Overall Dimensions (L x W x H) | Approx. 210 cm x 95 cm x 90 cm (with headrest and armrests) |
| Table Length (without headrest) | Approx. 180 cm |
| Table Width (without armrests) | Approx. 61 cm |
| Adjustable Height | Approx. 68 cm to 90 cm (in 3 cm increments) |
| Folded Dimensions (H x W x D) | Approx. 90 cm x 60 cm x 16 cm |
| Weight | Approx. 13 kg |
| Maximum Working Load | 250 kg (551 lbs) |
| Static Load Capacity | 900 kg (1984 lbs) |
| Upholstery Material | 100% PVC (5 cm thick padding) |
| Frame Material | Aluminum |
| Color | Beige |
Figure 7: Detailed dimensions and technical data.
Warranty and Support
For warranty information, please refer to the purchase documentation or contact your retailer. For technical support or inquiries regarding your tectake® massage table, please visit the official tectake website or contact their customer service department.
Note: Specific warranty terms may vary by region and retailer.
