1. Introduction
The Ashley Hearth Products AW1120E-P is an EPA Certified wood burning stove designed for efficient heating. This air-tight plate steel stove features nickel-pewter trim and a charcoal black finish, complementing various interior styles. Its heavy cast iron door includes air-washed ceramic glass, providing a clear view of the burning fire.
This model meets the stringent requirements of the EPA "Step 2" 2020 Certification Guidelines, ensuring environmentally responsible operation. With a heat output of 68,000 BTUs, it is capable of heating areas up to 1,200 square feet. The firebox accommodates logs up to 18 inches in length.
Figure 1: Ashley AW1120E-P Wood Burning Stove
Key Features:
- EPA "Step 2" 2020 Certified for clean burning.
- 68,000 BTU heat output, heating up to 1,200 sq ft.
- Accommodates logs up to 18 inches.
- Heavy cast iron door with air-washed ceramic glass.
- Includes both adjustable legs and a pedestal base for versatile installation.
Figure 2: Silent and Reliable Radiant Heat
Figure 3: Operation does not require external power
Figure 4: Large ceramic glass viewing window
2. Safety Information
Always read and understand this manual completely before installing, operating, or performing maintenance on your wood stove. Failure to follow these instructions could result in property damage, bodily injury, or even death.
Important Safety Precautions:
- Install the stove according to local building codes and regulations. Consult with a certified installer.
- Use only seasoned, dry wood as fuel. Do not burn trash, plastics, or treated wood.
- Maintain proper clearances to combustible materials as specified in the installation instructions.
- Ensure adequate ventilation and a properly installed chimney system.
- Keep children and pets away from the hot stove surfaces.
- Have a working smoke detector and carbon monoxide detector in your home.
- Never use flammable liquids to start or rekindle a fire.
3. Setup and Installation
The AW1120E-P wood stove is designed for freestanding installation. It includes both adjustable legs and a pedestal base, allowing you to choose the configuration that best suits your space and aesthetic preferences. Assembly of the stove itself is not required, but proper installation of the flue and placement is critical.
Figure 5: Adjustable legs and pedestal base options
Installation Considerations:
- Flue Exhaust: The stove requires a 6-inch flue exhaust. Ensure proper connection to a suitable chimney system.
- Fresh Air Intake: The stove features a fresh air intake and a blower knockout, allowing for optional external air supply and heat distribution.
- Location: Position the stove on a non-combustible hearth pad, maintaining all required clearances from walls and other combustible materials. Refer to the detailed installation manual for specific clearance requirements.
Figure 6: 6-inch flue exhaust connection
Figure 7: Fresh air intake and blower knockout
4. Operating Instructions
Operating the AW1120E-P involves understanding its primary and secondary air systems for efficient combustion.
Starting a Fire:
- Open the primary air inlet, located at the front of the stove, to allow maximum airflow for ignition.
- Place kindling and a few small pieces of dry wood in the firebox.
- Ignite the kindling. Once a small fire is established, add larger pieces of wood, ensuring not to overfill the firebox.
- Close the stove door securely.
Efficient Combustion:
The stove utilizes a dual air system. The primary air inlet ignites the wood from below. Once the fire is burning steadily, the secondary air inlet, located at the rear of the firebox, feeds air through three ignition tubes directly above the wood. This process promotes secondary combustion, consuming gases and particles for a more efficient burn and maximizing energy extraction from the wood.
Video 1: Overview of the Ashley Hearth AW1120E-P Wood Burning Stove. This video demonstrates the stove's features and operation, including the firebox and air controls.
Video 2: USSC Ashley Wood Stoves. This video provides a general overview of Ashley wood stoves, highlighting their design and heating capabilities.
5. Maintenance
Regular maintenance ensures the safe and efficient operation of your wood stove.
Ash Removal:
The AW1120E-P is equipped with an integrated ash pan for convenient ash removal. Periodically, when the stove is cool, open the ash pan drawer and carefully remove the ashes. Dispose of ashes in a metal container with a tight-fitting lid, away from combustible materials.
Figure 8: Firebrick lined firebox for durability and heat retention
General Maintenance Tips:
- Chimney Cleaning: Have your chimney inspected and cleaned by a certified professional at least once a year, or more frequently depending on usage.
- Glass Cleaning: Clean the ceramic glass with a specialized stove glass cleaner when the stove is cool.
- Gasket Inspection: Periodically check the door gasket for wear and tear. Replace if necessary to maintain an airtight seal.
6. Troubleshooting
This section provides general guidance for common issues. For complex problems, consult a qualified technician.
Common Issues and Solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Poor Draft / Smoke Backing Up | Blocked chimney, cold flue, improper air settings. | Check for chimney obstructions, pre-heat flue, adjust air inlets. |
| Low Heat Output | Wet wood, insufficient air, small fuel load. | Use dry seasoned wood, ensure air inlets are open, load more wood. |
| Excessive Creosote Buildup | Burning wet wood, low burning temperatures. | Burn dry wood, maintain hotter fires, clean chimney regularly. |
7. Specifications
Detailed technical specifications for the Ashley AW1120E-P Wood Burning Stove.
- Brand: Ashley Hearth Products
- Model: AW1120E-P
- Material: Alloy Steel
- Color: Black
- Product Dimensions (D x W x H): 21" x 22.5" x 31.7"
- Heat Output: 68,000 British Thermal Units
- Heating Coverage: Up to 1,200 sq ft
- Fuel Type: Wood
- Ventilation Type: Direct Vent
- Efficiency: High Efficiency
- Assembly Required: No (for the stove unit itself)
- Mounting Type: Freestanding
- UPC: 012685100418
Figure 9: Product Dimensions
8. Warranty and Support
Warranty Information:
The Ashley AW1120E-P Wood Burning Stove comes with a Limited Lifetime Firebox Warranty. All other parts are covered by a 1-year warranty. Please retain your proof of purchase for warranty claims.
Customer Support:
For technical assistance, parts, or warranty inquiries, please contact Ashley Hearth Products customer support. Refer to the product packaging or the official Ashley Hearth Products website for the most current contact information.