Progressive Industries 50 Amp Portable Surge Protector Kit

Introduction

The Progressive Industries 50 Amp Portable Surge Protector Kit (PSK-50) is designed to safeguard your RV and its sensitive electronics from faulty wiring and power surges encountered at power pedestals. This kit provides comprehensive protection and diagnostic capabilities to ensure a safe and reliable power connection.

Image: The Progressive Industries 50 Amp Portable Surge Protector Kit, featuring both the receptacle tester and the surge module.

Key Features:

• Separate receptacle tester to detect wiring faults at the pedestal.
• Surge module to attach to the detachable power cord for surge protection.
• 50A Surge module ratings: 45,000A max spike / 2,030 joules.
• Tests for Open Ground, Open Neutral, Open Hot with a single indicator.
• Tests for Hot/Neutral Reversed, Hot/Ground Reversed with a single indicator.
• Surge module contains a surge protection indicator alerting the user when depleted.
• Constructed from durable plastic.
• Made in the USA or Imported.

Setup Instructions

Step 1: Check Pedestal Wiring with the Receptacle Tester

Before connecting your RV, it is crucial to verify the power pedestal's wiring using the included RV Receptacle Tester. This ensures the electrical supply is safe and correctly configured.

1. Ensure Circuit Breakers are OFF: Before plugging in the RV Receptacle Tester, ensure the corresponding circuit breakers on the power pedestal are in the OFF position.
2. Insert Tester: Insert the RV Receptacle Tester into the power pedestal's receptacle.
3. Turn ON Circuit Breakers: Flip the corresponding circuit breakers to the ON position.
4. Observe LED Indicators: The tester will illuminate LEDs to indicate the wiring condition.
   • A green LED indicates correct wiring, signifying that your RV is safe to plug in.
   • Red LEDs or no LEDs indicate incorrect wiring conditions such as Open Ground, Open Neutral, Open Hot, Hot Neutral Reversed, or Hot Ground Reversed. Do not connect your RV if incorrect wiring is detected.
5. Remove and Store Tester: Since the wiring condition of a power pedestal will not change during your stay, the tester can be removed from the power pedestal and stored after use. The tester is overmolded for additional durability and features a swivel handle for easier connection and disconnection.

Image: The 50 Amp RV Receptacle Tester, showing its LED indicators for wiring status.

Operating Instructions

Step 2: Connect Surge Module and Power Cord to Pedestal

Once the pedestal wiring has been verified as correct, proceed to connect the surge module and your RV's power cord.

1. Ensure Circuit Breakers are OFF: Before plugging the surge module and power cord into the power pedestal, ensure the corresponding circuit breakers are set to the OFF position.
2. Connect Surge Module: Attach the surge module to your RV's detachable power cord.
3. Insert into Pedestal: Insert the combined surge module and power cord into the power pedestal's receptacle.
4. Turn ON Circuit Breakers: Flip the corresponding circuit breakers to the ON position.
5. Protection in Use: While in use, the surge module provides a high level of surge protection. It is designed to remain discreetly under the power pedestal cover, offering additional weather protection and deterring theft compared to all-in-one surge protection and testing units.
6. Surge Capacity Indicator: The surge module is overmolded for additional durability and contains an LED indicator. This LED will alert the user when the surge capacity has been exceeded, indicating that the module has absorbed a significant surge and may need replacement.

Image: The 50 Amp Surge Module, designed to connect to your RV's power cord.

Surge Module Specifications:

• 50A Module: 45,000A max spike rating / 2,030 joules rating.
• Response Time: Less than one nanosecond (<10⁻⁹ seconds). This rapid response time, combined with a high max spike rating, quickly dissipates large surge events before they can reach your RV's sensitive electronics.

Maintenance

The Progressive Industries Portable Surge Protector Kit is designed for durability and minimal maintenance. However, regular inspection is recommended:

• Visual Inspection: Periodically inspect both the receptacle tester and the surge module for any signs of physical damage, cracks, or corrosion.
• LED Indicator Check: For the surge module, regularly check the LED indicator. If the LED is off, it signifies that the surge protection capacity has been depleted, and the module should be replaced to ensure continued protection.
• Cleaning: Keep the units clean and free of dirt and debris. Use a dry cloth for cleaning. Do not immerse in water.

Troubleshooting

If you encounter issues with your Progressive Industries Portable Surge Protector Kit, consider the following:

• No Power to RV:
  • Ensure power pedestal circuit breakers are ON.
  • Check the LED indicator on the surge module. If it's off, the module's surge protection may be depleted, requiring replacement.
  • Verify all connections are secure between the power cord, surge module, and pedestal.
• Receptacle Tester Indicates Fault:
  • If the tester shows an incorrect wiring condition (e.g., Open Ground, Reversed Wiring), do NOT connect your RV. Seek an alternative power source or contact campground management to address the wiring issue.
• Physical Damage: If either the tester or surge module shows signs of physical damage, discontinue use immediately and replace the affected component.

Specifications

Warranty Information

Progressive Industries stands behind the quality and durability of its products. The Portable Surge Protector Kits are backed by a Lifetime Warranty, reflecting the manufacturer's commitment to long-lasting performance and customer satisfaction.

For specific warranty claims or details, please refer to the official Progressive Industries website or contact their customer support.

Customer Support

For any questions, technical assistance, or warranty inquiries regarding your Progressive Industries 50 Amp Portable Surge Protector Kit, please contact Progressive Industries customer support.

While specific contact details are not provided in this manual, general support information can typically be found on the manufacturer's official website or through your product retailer.

Always refer to the latest information available from Progressive Industries for the most accurate and up-to-date support options.