Insta360 GPS Smart Remote

Insta360 GPS Smart Remote User Manual

Model: GPS Smart Remote

Introduction

The Insta360 GPS Smart Remote is designed to provide seamless remote control for your Insta360 ONE R, ONE RS, ONE X, and ONE X2 cameras. Beyond basic camera control, it records and tracks essential GPS data, including speed, altitude, and direction, enhancing your captured footage with valuable telemetry. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your device.

What's in the Box

Verify that all the following items are included in your package:

Contents of the Insta360 GPS Smart Remote box, including the remote, wrist strap, silicone case, USB cable, and cleaning cloth.

Image: All components included in the Insta360 GPS Smart Remote package.

Setup

1. Charging the Remote

Before first use, fully charge the GPS Smart Remote. Connect the included USB Charge Cable to the Micro USB port on the remote and to a 5V/1A charging station. A full charge typically takes approximately 2 hours. The display will indicate charging status.

2. Pairing with Your Camera

To pair the remote with your Insta360 camera (ONE R/RS or ONE X/X2):

  1. Ensure your camera is powered on and in pairing mode.
  2. Power on the GPS Smart Remote.
  3. Navigate to the Bluetooth pairing settings on both devices and initiate the connection.
  4. Important Note: If you experience difficulty pairing, ensure that your camera is not simultaneously connected to the Insta360 mobile application. Disconnect from the app before attempting to pair with the remote.

3. Acquiring GPS Signal

For accurate GPS data recording, the remote needs to acquire a satellite signal. For best performance:

Operating the Remote

Basic Controls

The remote features a simple interface for controlling your camera:

GPS Data Tracking

Once connected and a GPS signal is acquired, the remote will automatically record GPS data during your video recordings. This data can be overlaid onto your footage using the Insta360 mobile app or desktop software, displaying metrics like speed, altitude, and direction.

Insta360 GPS Smart Remote displaying GPS data alongside a smartphone screen showing a map overlay with speed and elevation.

Image: The remote's display showing recording time and GPS status, with a visual representation of GPS data overlay on a map.

Google Street View Integration

The GPS Smart Remote integrates with Google Street View, allowing for one-touch uploads of your expeditions. This functionality is primarily accessed and managed within the Insta360 mobile application.

Mounting Options

The GPS Smart Remote offers versatile mounting options:

Diagram showing how to mount the Insta360 GPS Smart Remote onto a selfie stick using the included clip.

Image: Diagram for selfie stick mounting.

Actual image of the Insta360 GPS Smart Remote mounted on a selfie stick.

Image: Remote mounted on a selfie stick.

Diagram showing how to attach the Insta360 GPS Smart Remote to the wrist strap and wear it.

Image: Diagram for wrist strap mounting.

Maintenance

Cleaning

Wipe the remote with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, ensuring no moisture enters the charging port or buttons. Do not use harsh chemicals or abrasive cleaners.

Battery Care

To prolong battery life:

Environmental Considerations

The operating temperature range for the remote is -10°C to 40°C. Avoid exposing the device to extreme temperatures, direct sunlight for prolonged periods, or high humidity.

Troubleshooting

ProblemSolution
Remote won't pair with camera.Ensure the camera is not connected to the Insta360 app. Disconnect from the app, then attempt pairing. Power cycle both devices if necessary.
Poor or no GPS signal.Move to an open outdoor area. Avoid tall buildings or dense foliage. Ensure no strong electrical interference nearby. Remain stationary for a few minutes to allow signal acquisition.
Battery drains quickly or doesn't hold charge.Ensure the remote is fully charged (approx. 2 hours). If issues persist, contact Insta360 support. Avoid leaving the remote in extreme temperatures.
Camera locks up when taking pictures via remote.Ensure both the camera and remote have the latest firmware updates. If the issue persists, try restarting both devices.
Display text is difficult to read.The display is a 1-inch monochrome screen. Ensure adequate lighting for readability. There are no user-adjustable font size settings.
Remote does not power on/off with camera.The remote is designed to power off when the camera powers down, but it does not automatically power on the camera or vice-versa. Manual power on/off is required for the remote.

Specifications

FeatureDetail
Weight43g
Display Size1 inch
Charging ConnectorMicro USB
Battery TypeLithium Ion (non-removable)
Battery Capacity800mAh
Run-TimeApproximately 16 hours
Charging PeriodApproximately 2 hours (with 5V/1A charging station)
Operating Temperature-10°C to 40°C
Wireless Control RangeApproximately 10 meters (without interference or obstructions)
Connectivity TechnologyBluetooth
Compatible DevicesInsta360 ONE R/RS, ONE X/X2 Cameras
Max Supported Devices1 (one camera at a time)

Warranty and Support

Warranty Information

For detailed warranty information regarding your Insta360 GPS Smart Remote, please refer to the official Insta360 website or the warranty card included with your product. Warranty terms and conditions may vary by region.

Customer Support

If you encounter any issues not covered in this manual or require further assistance, please contact Insta360 customer support through their official website. You can find contact details and additional resources at www.insta360.com/support.