Moukey MPS2
Moukey MPS2 Portable Karaoke Speaker User Manual
Model: MPS2
Introduction
Thank you for choosing the Moukey MPS2 Portable Karaoke Speaker. This versatile PA stereo system is designed for various entertainment needs, offering high-quality audio, portable design, and multiple connectivity options. Please read this manual carefully to ensure proper operation and maintenance of your device.
Image: The Moukey MPS2 portable karaoke speaker, shown with its included wired microphone and remote control. The speaker features a colorful LED light display on its front grille.
Setup Guide
Unpacking and Initial Charge
- Carefully remove all components from the packaging. Ensure all items listed in the "Included Components" section are present.
- Before first use, fully charge the speaker's built-in battery for over 6 hours using the included USB charging cable. Connect the USB cable to the speaker's charging port and a compatible 5V DC power source.
Image: Visual representation of the Moukey MPS2 speaker's battery life, indicating a charging time of 6 hours and a playing time of 3-10 hours depending on usage.
Connecting the Microphone
- Insert the 3.5mm jack of the wired microphone into the "MIC IN" port on the speaker's control panel.
Image: The Moukey MPS2 speaker positioned next to its wired microphone, illustrating the 6.56 ft (approximately 2 meter) cable length for flexible use.
Operating Instructions
Control Panel Overview
Image: A detailed view of the Moukey MPS2 speaker's control panel, highlighting the LED screen, volume knobs, microphone input, AUX input, TF card slot, and USB port for easy operation.
The control panel features an HD LED screen and intuitive controls for easy operation. Key controls include power switch, volume knob, microphone volume, echo control, mode selection, and media playback buttons.
Power On/Off
- To power on the speaker, slide the "POWER" switch to the "ON" position.
- To power off, slide the "POWER" switch to the "OFF" position.
Mode Selection
Press the "MODE" button on the control panel or remote control to switch between available input modes:
- Bluetooth (BT): For wireless connection to smartphones, tablets, and laptops.
- AUX: For wired connection via 3.5mm audio cable.
- FM Radio: To listen to FM radio stations.
- USB/TF Card: For playing audio files from USB drives or TF (Micro SD) cards.
Image: The Moukey MPS2 speaker illustrating its support for multiple playing methods and Bluetooth devices, including Bluetooth (BT), AUX input, FM radio, and USB/TF card playback.
Bluetooth Pairing
- Turn on the speaker and select "BT" mode. The speaker will indicate it is ready for pairing.
- Enable Bluetooth on your device (smartphone, tablet, laptop).
- Search for "Moukey MPS2" (or similar name) in your device's Bluetooth settings and select it to pair.
- Once paired, you can play audio wirelessly through the speaker.
Using the Microphone
- Ensure the microphone is securely connected to the "MIC IN" port.
- Adjust the "MIC.VOL" knob on the control panel to control the microphone's volume.
- Use the "ECHO" knob to add or reduce echo effect to the microphone's output.
DJ Lights
The speaker is equipped with colorful LED DJ lights. These lights automatically activate when the speaker is powered on, enhancing the party atmosphere.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the speaker. Do not use liquid cleaners or abrasive materials.
- Storage: When not in use for extended periods, store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Recharge the speaker regularly, even if not in constant use.
- Handling: Handle the speaker with care. Avoid dropping or subjecting it to strong impacts.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Battery is depleted. | Charge the speaker for at least 6 hours. |
| No sound | Volume is too low or muted. Incorrect input mode selected. Device not properly connected. | Increase the volume. Press "MODE" to select the correct input. Reconnect Bluetooth device or AUX cable. |
| Microphone not working | Microphone not connected properly. Microphone volume is too low. | Ensure microphone is fully inserted into "MIC IN" port. Adjust "MIC.VOL" knob. |
| Bluetooth connection unstable | Device is too far from the speaker. Interference from other devices. | Move the device closer to the speaker. Avoid placing speaker near strong electromagnetic sources. |
Specifications
| Feature | Detail |
|---|---|
| Model | MPS2 |
| Part Number | MK0141-US |
| Speaker Size | 6.5 inches (Subwoofer) |
| Output Wattage | 10 Watts |
| Connectivity | Bluetooth 5.0, AUX (3.5mm Jack), USB, TF Card |
| Power Source | Battery Powered (Rechargeable) |
| Voltage | 5 Volts (DC) |
| Battery Life (Max Volume) | Up to 4.5 hours |
| Charging Time | Over 6 hours |
| Microphone Cable Length | 5.64 ft (approx. 1.72 meters) |
| Product Dimensions | 34.5 x 25.5 x 17 cm (13.6 x 10 x 6.7 inches) |
| Weight | 2.7 kg (5.95 lbs) |
| Included Components | Remote Control, VHF Wired Microphone, USB Charging Cable |
Image: An exploded view diagram of the Moukey MPS2 speaker, highlighting its 6.5-inch subwoofer and providing key dimensions: 13 inches (33 cm) height, 6.2 inches (15.7 cm) depth, and 9 inches (22.9 cm) width.
Warranty and Support
For warranty information and technical support, please refer to the official Moukey website or contact their customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.
Visit the official Moukey Store: Moukey Store on Amazon
Related documentsMPS2
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.