AEG IKE9545AXB Induction Hob User Manual

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your AEG IKE9545AXB Induction Hob. Please read this manual carefully before using the appliance to ensure safe and efficient operation. Keep this manual for future reference.

Front view of the AEG IKE9545AXB Induction Hob, showcasing its sleek black glass surface and touch controls.

Setup and Installation

Proper installation is crucial for the safe and optimal performance of your induction hob. It is recommended that installation be performed by a qualified technician.

Dimensions and Cut-out

Refer to the diagram below for precise dimensions and required cut-out measurements for your countertop.

• Overall Dimensions (W x D): 89.6 cm x 51.6 cm
• Installation Height: 4.6 cm
• Cut-out Dimensions (W x D): 88.0 cm x 49.0 cm
• Minimum countertop depth: 12 mm (SlimFit-Design allows installation without a protective base)

Detailed diagram showing the dimensions and required cut-out for installing the AEG IKE9545AXB Induction Hob into a countertop.

Electrical Connection

The appliance requires a voltage of 400V3N with a connected load of 11000 Watts. The cable length is 1.5 meters. Ensure the electrical installation complies with local regulations.

SlimFit-Design Installation

The SlimFit-Design allows for space-saving installation, fitting into any countertop depth from 12 mm. A protective base is not required, simplifying the installation process.

Comparison showing traditional installation with a protective base versus the space-saving SlimFit-Design installation without a protective base.

Operating Instructions

Your AEG Induction Hob is equipped with advanced features designed for convenience and efficiency.

Direct Control Touch Sensor

The hob is controlled via intuitive direct control touch sensors. Simply touch the desired power level for precise and fast adjustments.

MaxiSense Function

MaxiSense technology allows for flexible use of the hob surface. The cooking zones adapt to the size and shape of your cookware, ensuring efficient heating for almost all pot sizes.

Illustration of the MaxiSense feature, showing how the induction coils adapt to different pot sizes on the cooking surface.

Bridge Function

The Bridge function allows you to connect two consecutive cooking zones together, creating a larger cooking area. This is ideal for oversized cookware such as griddle pans or large roasting dishes.

Image demonstrating the Bridge Function, where two cooking zones are combined to accommodate a large rectangular grill pan, alongside two smaller pots.

Hob²Hood Function

The Hob²Hood function automatically controls your cooker hood based on the cooking process. This intelligent feature optimizes ventilation and helps save energy.

Visual representation of the Hob²Hood function, showing steam rising from a pot on the hob and being automatically extracted by a connected cooker hood.

Power Function

Activate the Power function to significantly reduce heating time. For example, 1 liter of water can boil in approximately 2 minutes.

Close-up of the hob's control panel showing the 'P' indicator for the Power Function, indicating accelerated heating.

Pause Function (Stop+Go)

The Pause function allows you to temporarily pause the cooking process. With a single touch, you can switch to a keep-warm setting and then resume cooking at the original power level.

Close-up of the hob's control panel highlighting the 'STOP + GO' button, which activates the Pause Function.

Child Lock

Activate the Child Lock function to prevent accidental operation of the hob. This locks the control panel, ensuring safety, especially in households with children.

Close-up of the hob's control panel showing the lock icon, indicating the Child Lock function.

Other Features

• Timer: Set cooking times for precise results.
• Residual Heat Indicator: Warns when cooking zones are still hot after use.
• Electronic Automatic Cookers: Advanced cooking programs for various dishes.
• Pot Detection: Automatically detects suitable cookware on the cooking zones.

Care and Maintenance

Regular cleaning and proper maintenance will ensure the longevity and optimal performance of your AEG Induction Hob.

Cleaning the Hob Surface

Due to the lower surface temperature of an induction hob, it is very easy to clean and nothing burns in. Use a soft cloth and a mild cleaning agent. Avoid abrasive cleaners or scouring pads.

Comparison illustrating the ease of cleaning an induction hob (right) versus a traditional hob with burnt-on residue (left).

General Care Tips

• Wipe spills immediately to prevent staining.
• Ensure the hob is cool before cleaning.
• Do not use steam cleaners.

Troubleshooting

If you encounter any issues with your hob, please refer to the following common solutions before contacting service.

For issues not covered here, please contact AEG customer support.

Technical Specifications

Detailed technical specifications for the AEG IKE9545AXB Induction Hob.

Warranty and Support

AEG products are manufactured to high quality standards. For information regarding your product's warranty, please refer to the warranty card included with your purchase or visit the official AEG website.

Customer Support

If you require technical assistance, spare parts, or have any questions about your AEG Induction Hob, please contact AEG customer support. Contact details can typically be found on the official AEG website or in your product documentation.

When contacting support, please have your model number (IKE9545AXB) and serial number ready.