Absolute USA SP654-HSB524 Speaker Kit User Manual

Introduction

This manual provides instructions for the installation and use of the Absolute USA SP654-HSB524 Speaker Kit. This kit is designed to replace factory speakers in Honda Civic models from 2006 to 2011, and other compatible Honda and Acura vehicles. The kit includes 6.5-inch 4-way car speakers, speaker adapter rings, and speaker connector harnesses for a direct fit installation.

Setup and Installation

The Absolute USA SP654-HSB524 speaker kit is designed for a hassle-free, plug-and-play installation without the need for cutting or extensive modifications. It includes all necessary components for upgrading your vehicle's audio system.

Package Contents:

• 2 x Absolute USA SP654 6.5" 4-Way Car Speakers
• 2 x HSB524 Honda Speaker Adapter Kits (for 6.5"-6.75" speakers)
• 2 x ABS72-7800 Acura & Honda Factory Speaker to Aftermarket Harness Pairs

Installation Steps:

1. Prepare Your Vehicle: Ensure the vehicle's ignition is off and the battery is disconnected before beginning any electrical work. Carefully remove the door panels or speaker grilles to access the factory speakers.
2. Remove Factory Speakers: Disconnect the wiring from the factory speakers and unmount them from their location.
3. Assemble Speaker and Adapter: Attach the Absolute USA SP654 speakers to the HSB524 Honda speaker adapter rings. It is crucial to ensure a secure and proper fit of the speaker within the adapter ring before proceeding.
   

   Image: Two pairs of black speaker adapter rings, designed to facilitate the installation of aftermarket speakers into factory locations.

   
   

   Image: A side view of an Absolute USA SP654 speaker, featuring a protective grille and showing its depth.

4. Connect Wiring Harness: Connect the ABS72-7800 speaker connector harnesses to the new Absolute USA SP654 speakers. Then, connect the other end of the harness to the vehicle's factory speaker wiring. This provides a direct, solder-free connection.
   

   Image: Two pairs of speaker wiring harnesses with gray connectors and red spade terminals, designed for plug-and-play speaker installation.
5. Mount New Speakers: Securely mount the assembled speaker and adapter unit into the factory speaker location. Ensure all mounting screws are tightened appropriately.
6. Test Connections: Before reattaching any panels, reconnect the vehicle battery and test the speakers to ensure they are functioning correctly. Verify sound output from all installed speakers.
7. Reassemble: Once functionality is confirmed, carefully reattach the door panels or speaker grilles. Double-check all connections and ensure that everything is securely in place before reattaching any panels or covers.

Important Note on Fitment: While designed for compatibility, it is essential to verify the physical fit of the SP654 speakers within the HSB524 adapter rings and the vehicle's speaker opening before final installation. Some vehicle variations or speaker designs may require minor adjustments or alternative mounting methods not covered in this general guide.

Image: Four Absolute USA SP654 6.5-inch 4-way car speakers, two shown with protective grilles and two without, highlighting their design.

Operating Instructions

The Absolute USA SP654 speakers are passive components that operate in conjunction with your vehicle's car stereo or head unit. Once properly installed, their operation is controlled entirely by your audio source.

• Power On/Off: Speakers will power on and off with your car stereo.
• Volume Control: Adjust volume using your car stereo's controls.
• Audio Settings: Utilize your car stereo's equalizer, balance, and fader settings to optimize sound output to your preference.

Maintenance

These speakers require minimal maintenance to ensure long-lasting performance.

• Cleaning: Use a soft, dry cloth to gently wipe the speaker grilles and surrounds. Avoid using harsh chemicals or abrasive cleaners.
• Environmental Protection: While designed for automotive use, avoid exposing speakers to excessive moisture or extreme temperatures. The speakers are not waterproof.
• Inspection: Periodically check speaker mounts and connections to ensure they remain secure.

Troubleshooting

If you encounter issues with your Absolute USA SP654-HSB524 speaker kit, refer to the following common solutions:

• No Sound from Speaker:
  • Check all wiring connections, ensuring they are secure and correctly plugged into both the speaker and the vehicle's harness.
  • Verify the car stereo is powered on and functioning correctly.
  • Check the car stereo's balance and fader settings to ensure audio is directed to the affected speaker.
• Distorted Sound:
  • Reduce the volume level on your car stereo.
  • Check for loose connections or damaged wiring.
  • Ensure the speaker is securely mounted and not vibrating against the door panel or other components.
  • Verify that the speaker is properly seated within the adapter ring and not obstructed.
• Poor Bass Response:
  • Check the car stereo's bass settings and equalizer.
  • Ensure the speaker is sealed properly in its mounting location to prevent bass cancellation.
• Speakers Do Not Fit Adapter Rings or Vehicle Opening:
  • Carefully re-examine the speaker and adapter ring for proper alignment. Some minor rotation or adjustment may be necessary.
  • Confirm that the speaker model (SP654) and adapter model (HSB524) are correct for your specific vehicle year and model.
  • If significant fitment issues persist, contact Absolute USA customer support for guidance.

Specifications

Warranty Information

The Absolute USA SP654-HSB524 Speaker Kit comes with a Limited Warranty. For specific details regarding warranty coverage, duration, and claims procedures, please refer to the warranty card included with your product or contact Absolute USA customer support directly.

Customer Support

For technical assistance, installation questions, or warranty inquiries, please contact Absolute USA customer support. Refer to the contact information provided on the product packaging or the official Absolute USA website.