Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your WOSTOKE Car Android Navigation Stereo. This unit is designed for Subaru Forester models from 2007 to 2013. Please read this manual thoroughly before installation and use to ensure proper functionality and to prevent damage.
The system features a 9-inch IPS touchscreen, Android operating system, GPS navigation, Wi-Fi, Bluetooth, and support for a reverse camera and steering wheel controls.
Important Notes
CANBUS Requirement:
If your car has an original amplifier, a CANBUS adapter must be purchased separately. Without the CANBUS, the unit will produce no sound. Typically, if your car has a large colorful screen or factory navigation, it indicates the presence of an amplifier.
For CarPlay or Android Auto functionality, ensure you select the correct product options, as this specific model does not include built-in CarPlay or Android Auto.
Image: Important note regarding CANBUS requirement for vehicles with original amplifiers to ensure sound output.
Setup and Installation
Package Contents:
- 1x Car Android Head Unit with Mask
- 1x GPS Antenna
- 1x Power Cable (Plug & Play)
- 2x USB Port Cables
- 1x RCA Expand Cable
- 1x RCA Connector for Reverse Camera
- 1x Install Kit
- 1x External Microphone
- 1x AHD 720 Reverse Camera
- CANBUS (if purchased separately for vehicles with original amplifiers)
General Installation Steps:
- Preparation: Ensure the vehicle's battery is disconnected before starting installation.
- Remove Original Unit: Carefully remove the existing car stereo unit from the dashboard.
- Connect Wiring: Connect the provided power cable, GPS antenna, USB cables, and RCA cables to the new head unit. Ensure all connections are secure.
- Reverse Camera Connection: Connect the AHD 720 Reverse Camera to the RCA connector for the reverse camera input on the head unit. Route the camera cable to the rear of the vehicle.
- External Microphone: Connect the external microphone for improved call quality. Position it in a suitable location, such as near the sun visor.
- Steering Wheel Control: Connect the steering wheel control wires if your vehicle supports this feature. Configuration will be done in the operating instructions section.
- CANBUS (if applicable): If your vehicle requires a CANBUS adapter, connect it according to its specific instructions to ensure proper communication with the vehicle's systems, especially for sound.
- Test Connections: Before fully reassembling the dashboard, temporarily reconnect the battery and power on the unit to test basic functions like power, display, and sound.
- Secure Unit: Mount the new head unit securely into the dashboard using the provided install kit.
- Reassemble: Reassemble the dashboard components.
Note: Professional installation is recommended if you are unfamiliar with car audio system wiring.
Operating Instructions
1. GPS Navigation
The unit features built-in GPS navigation. With a Wi-Fi connection, you can use real-time navigation. The satellite GPS can locate your position without a network connection, but real-time traffic and map updates require internet access.
Image: Display showing the GPS navigation interface with a map and icons for navigation applications.
2. Wi-Fi Connectivity
Connect to Wi-Fi to browse the internet, access online navigation, stream videos, and download applications from the app store. Go to Settings > Wi-Fi to connect to an available network or use your mobile hotspot.
Image: Head unit screen displaying various application icons, indicating Wi-Fi functionality for app downloads and internet access.
3. Bluetooth Function (BT)
The built-in Bluetooth allows for wireless music streaming and hands-free calling. Pair your mobile phone with the head unit via Bluetooth settings. Once paired, you can play stereo music and manage calls directly from the unit.
Image: Bluetooth interface on the head unit, showing a phone dial pad and music playback controls, demonstrating hands-free calling and audio streaming.
4. FM Radio
Access the FM Radio application to listen to local radio stations. You can manually tune to frequencies or use the scan function to find available stations. Long-press a station number to save it as a favorite.
Image: FM Radio interface displaying frequency selection and preset buttons for saving favorite radio stations.
5. Car Reverse Camera
The unit supports an aftermarket RCA type backup camera. When the vehicle is shifted into reverse, the display will automatically switch to the camera view, providing assistance for parking and maneuvering.
Image: Head unit displaying the view from a reverse camera, complete with parking guidelines, assisting with vehicle maneuvering.
6. Steering Wheel Control (SWC)
The unit supports steering wheel controls, allowing you to quickly switch functions without taking your hands off the wheel. Navigate to Settings > Steering Learn to configure the buttons according to your vehicle's controls.
Image: Head unit screen showing the 'Steering Learn' interface, used to configure and map vehicle steering wheel buttons to unit functions.
7. Mirror Link
The Mirror Link function allows you to display your phone screen on the head unit. It supports wireless connection for iOS devices and wired connection for Android devices. This enables you to use phone applications directly on the larger screen.
8. USB Playback
Connect USB devices to the provided USB ports to play audio and video files. The unit supports 1080P hardware decoding and various audio playback formats.
Maintenance
- Screen Cleaning: Use a soft, lint-free cloth to clean the touchscreen. Do not use abrasive cleaners or solvents, as they may damage the screen.
- Software Updates: Periodically check for software updates to ensure optimal performance and access to new features. Updates can typically be found on the manufacturer's website or through the unit's settings if connected to Wi-Fi.
- General Care: Avoid exposing the unit to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
- Cable Connections: Ensure all cables remain securely connected. Loose connections can lead to intermittent issues.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No Sound Output | Missing or incorrectly installed CANBUS adapter for vehicles with original amplifiers. Volume too low or muted. Incorrect audio source selected. |
|
| Unit Does Not Power On | Loose power connection. Blown fuse. Vehicle battery issues. |
|
| GPS Signal Loss / Inaccurate | GPS antenna not properly installed or obstructed. Poor satellite reception. |
|
| Bluetooth Disconnects Frequently | Interference. Out of range. Software glitch. |
|
| Steering Wheel Controls Not Working | Incorrect wiring. Not configured in settings. |
|
Specifications
- Model: WS-D0315
- Compatibility: Subaru Forester 2007-2013
- CPU: Quad Core
- Operating System: Android System
- RAM: 1GB
- ROM: 16GB
- Display Size: 9 Inches
- Display Type: IPS Multi-Touch Screen, 2.5D surface effect
- Resolution: 1024 x 600
- Connectivity: Internal Wi-Fi, Internal Bluetooth, USB
- Audio Output Mode: Stereo
- Special Features: GPS Navigation, Mirror Link (Wireless for iOS, Wired for Android), Car Rear View Camera Support (RCA type), Steering Wheel Control Support, FM Radio, 1080P hardware decoding
- OSD Language: English, French, German, Spanish, Italian, etc. (over 20 languages)
- Mounting Type: Dashboard Mount
- Parcel Dimensions: 30 x 21.79 x 12.9 cm
- Weight: 1.38 kg
Image: Close-up of the 9-inch IPS touchscreen, highlighting its 2.5D surface, multi-touch capability, and high-definition display.
Warranty and Support
This WOSTOKE product comes with a one-year warranty covering manufacturing defects. This warranty does not cover damage caused by human error, improper installation, or misuse.
For any questions, technical assistance, or warranty claims, please contact the seller directly. Your consultation is always welcomed, and after-sales support is guaranteed.
Please refer to your purchase documentation for specific contact details of the seller or manufacturer.