Introduction
Thank you for choosing the DYNAMIC SAUNAS Vittoria 2-Person Low EMF Far Infrared Sauna. This manual provides essential information for the safe and efficient operation, assembly, and maintenance of your sauna. Please read this manual thoroughly before installation and use, and retain it for future reference.
The Vittoria sauna is designed to provide a relaxing and therapeutic experience using Far Infrared technology, featuring low electromagnetic fields (EMF) for enhanced user comfort.
Safety Information
Important Safety Instructions:
- Consult a physician before using the sauna, especially if you have pre-existing medical conditions, are pregnant, or are taking medication.
- Do not use the sauna if you are under the influence of alcohol or drugs.
- Stay hydrated by drinking water before, during, and after sauna sessions.
- Limit sauna sessions to recommended durations to avoid overheating.
- Keep children and pets away from the sauna during operation.
- Ensure the sauna is properly grounded and connected to a suitable power supply.
- Do not attempt to modify or repair the sauna yourself. Contact qualified service personnel for assistance.
- Avoid placing flammable materials near or inside the sauna.
Package Contents
Upon receiving your DYNAMIC SAUNAS Vittoria, please verify that all components are present and undamaged. The package typically includes:
- Sauna panels (front, back, side walls, roof, floor)
- Bench and support frame
- Carbon heating elements (pre-installed in panels)
- Control panel
- Music system with Bluetooth capability and speakers
- Interior reading/chromotherapy lighting system
- Assembly hardware and tools (if applicable)
- Instruction Manual
If any parts are missing or damaged, contact customer support immediately.
Setup and Assembly
The DYNAMIC SAUNAS Vittoria is designed for straightforward assembly. It is recommended that two adults perform the assembly. Ensure you have adequate space and a level surface for installation.
Site Preparation
- Choose a dry, level indoor location.
- Ensure the electrical outlet is within reach of the power cord and meets the sauna's power requirements.
- Allow sufficient clearance around the sauna for ventilation and access.
Assembly Steps
- Unpack all components and lay them out in the designated assembly area.
- Place the floor panel on the prepared level surface.
- Connect the back panel to the floor panel, ensuring secure locking mechanisms.
- Attach the side panels to the back and floor panels.
- Install the front panel, including the door, connecting it to the side panels.
- Place the bench and its support frame inside the sauna.
- Carefully position the roof panel, aligning all electrical connections for the lighting and heating elements.
- Secure all connections and ensure the sauna structure is stable.
- Connect the power cord to a grounded electrical outlet.
Image: The fully assembled DYNAMIC SAUNAS Vittoria 2-Person Far Infrared Sauna, showcasing its natural hemlock wood construction and glass door.
Operating Instructions
Follow these steps to operate your DYNAMIC SAUNAS Vittoria sauna:
Powering On and Temperature Setting
- Ensure the sauna is plugged into a grounded outlet.
- Locate the control panel, typically on the interior or exterior of the sauna.
- Press the power button to turn on the sauna.
- Use the temperature controls to set your desired temperature. The carbon heating elements will begin to warm the sauna.
- Allow 10-15 minutes for the sauna to preheat to the set temperature.
Music System with Bluetooth
- Activate Bluetooth on your mobile device.
- Search for the sauna's Bluetooth device name (refer to the control panel instructions for specific naming).
- Pair your device. Once connected, you can stream audio through the sauna's two dynamic speakers.
Interior Reading and Chromotherapy Lighting
- The interior lighting system provides illumination for reading.
- The chromotherapy feature allows you to select different light colors to enhance your sauna experience. Refer to the control panel for color selection options.
Image: A visual representation of various chromotherapy light colors available within the sauna, including yellow, green, pink, white, blue, red, purple, orange, and teal.
Low EMF Technology
The Vittoria sauna incorporates Low EMF Far Infrared heating elements, designed to minimize electromagnetic field exposure during use. This design prioritizes user comfort and safety.
Image: An illustration depicting various sources of electromagnetic fields (EMF) in a typical home environment, alongside an EMF reader device, highlighting the sauna's low EMF design.
Benefits of Far Infrared Sauna Use
Far Infrared saunas utilize radiant heat energy that is absorbed by the body, offering several potential benefits:
- Muscle Relaxation: The deep tissue warmth can help relax sore muscles and reduce stiffness.
- Joint Comfort: May alleviate joint pain, particularly chronic discomfort associated with conditions like arthritis.
- Detoxification: Promotes perspiration, which can assist the body in discharging waste residues such as toxins, sodium, and heavy metals.
- Skin Health: Can contribute to improving various skin conditions.
- Comfortable Experience: Infrared saunas operate at lower, more tolerable temperatures compared to traditional saunas, enhancing comfort and relaxation.
Image: An elderly couple relaxing, symbolizing the comfort and therapeutic benefits associated with sauna use.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your sauna.
- Cleaning: Wipe down the interior and exterior wood surfaces with a damp cloth after each use. For deeper cleaning, use a mild, non-toxic wood cleaner. Avoid harsh chemicals or abrasive materials.
- Ventilation: Ensure adequate ventilation around the sauna to prevent moisture buildup.
- Electrical Connections: Periodically check all electrical connections for tightness and signs of wear.
- Wood Care: The natural hemlock wood construction requires minimal care. Avoid excessive moisture or direct sunlight exposure to prevent warping or discoloration.
Troubleshooting
Refer to the following table for common issues and their solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Sauna does not power on. | No power supply; loose connection; tripped circuit breaker. | Check power cord connection; verify outlet functionality; reset circuit breaker. |
| Sauna not heating. | Temperature not set; heating elements malfunction; control panel issue. | Ensure temperature is set correctly; contact customer support if heating elements are suspected. |
| Bluetooth not connecting. | Device not in pairing mode; incorrect device selected; interference. | Ensure device Bluetooth is on and discoverable; re-attempt pairing; move closer to the sauna. |
| Lights not working. | Bulb failure; loose connection; control panel issue. | Check connections; if bulbs are replaceable, replace them; contact support. |
For issues not listed here, or if solutions do not resolve the problem, please contact DYNAMIC SAUNAS customer support.
Specifications
| Feature | Detail |
|---|---|
| Model | Vittoria |
| Capacity | 2 Person |
| Exterior Dimensions (W x D x H) | 48" x 41" x 75" (add 4.4" for roof overhang) |
| Heating Elements | 6 Carbon heating elements |
| Wood Type | Natural Hemlock Wood |
| Lighting | Interior reading light, Chromotherapy lighting system |
| Audio System | Music System with Bluetooth Capability, 2 dynamic speakers with pre-amp |
| EMF Level | Low EMF |
Warranty and Support
For specific warranty details regarding your DYNAMIC SAUNAS Vittoria, please refer to the warranty card included with your purchase or visit the official DYNAMIC SAUNAS website. Keep your proof of purchase for warranty claims.
If you require technical assistance, have questions about operation, or need to report a problem, please contact DYNAMIC SAUNAS customer support. Contact information can typically be found on the brand's official website or on your purchase documentation.
