Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your TTY Store High Back Gaming Chair. Please read this manual thoroughly before assembly and use to ensure proper function and safety. This chair is designed to provide a comfortable and ergonomic seating experience for office and gaming use.
Safety Information
Important Warnings:
- Always follow the assembly instructions carefully.
- Do not stand in this chair or use the chair as a step ladder. Use it as a chair only.
- This chair is designed for one person to use at a time.
- Do not exceed the maximum weight capacity of 250 pounds (113 kg).
- Do not use this chair unless all bolts, screws, and knobs are firmly secured.
- Check all bolts, screws, and knobs every 90 days. Tighten if any are loose.
Parts List
Before beginning assembly, ensure all parts are present and accounted for. Refer to the diagram below for identification.
The image above displays the complete parts list required for assembly, including the chair base, wheels, gas lift, seat, backrest, armrests, and various screws and tools. It also reiterates important safety warnings regarding weight capacity and regular maintenance checks.
Setup & Assembly
Your TTY Store Gaming Chair is designed for super easy installation, typically taking about 10-15 minutes. All necessary hardware and tools are included.
- Unpack all components from the box and lay them out on a clean, flat surface.
- Attach the five wheels to the star base by pushing them firmly into the sockets until they click into place.
- Insert the gas lift cylinder into the center hole of the star base.
- Attach the mechanism plate to the underside of the seat using the provided screws. Ensure the front of the mechanism faces the front of the seat.
- Secure the armrests to the seat using the designated screws.
- Attach the backrest to the seat and armrests, ensuring all screws are tightened securely.
- Place the assembled seat onto the gas lift cylinder.
- Install the adjustable headrest and lumbar support cushions as desired.
Ensure all connections are tight before using the chair. If you encounter any difficulties, refer to the included assembly diagram.
Operating Instructions
Adjusting Chair Height
To adjust the chair's height, locate the lever on the right side, underneath the seat. While seated, pull the lever up to lower the chair. To raise the chair, stand up and pull the lever up. Release the lever at your desired height.
The image above illustrates the height adjustment mechanism and highlights the 360-degree swivel capability of the chair, emphasizing its ergonomic design and mobility.
Adjusting Tilt and Tension
The chair features a tilt lock and tension control. To recline the backrest, pull out the lever on the left side of the chair. Push the lever in to lock the backrest in an upright position. The tension control knob, located underneath the seat, can be rotated to adjust the resistance of the tilt mechanism. Turn clockwise to increase tension (making it harder to recline) and counter-clockwise to decrease tension (making it easier to recline).
The image demonstrates the chair's ability to recline up to 125 degrees, along with close-ups of the tilt lock lever and the tension control knob for personalized comfort.
Adjusting Lumbar Support and Headrest
The chair comes with an adjustable headrest pillow and lumbar support cushion. These can be moved up or down along the straps on the backrest to find the most comfortable position for your neck and lower back. The lumbar support is generously padded to help alleviate back pain from prolonged sitting.
The image highlights the adjustable nature of both the headrest and lumbar support, indicating how they can be positioned to provide optimal ergonomic comfort.
360-Degree Swivel
The chair is equipped with a 360-degree swivel function, allowing for flexible movement and easy access to different areas of your workspace without needing to reposition the entire chair.
Maintenance
Regular maintenance will help prolong the life and appearance of your gaming chair.
- Cleaning: The chair's soft PU leather upholstery is oil and water resistant, making it very easy to clean. Wipe down surfaces with a damp cloth and mild soap solution. Avoid harsh chemicals or abrasive cleaners.
- Hardware Check: Periodically check all bolts, screws, and knobs (approximately every 90 days) to ensure they are tight. Re-tighten any loose fasteners to maintain stability and safety.
- Caster Care: Keep the smooth-rolling nylon casters free of debris (hair, dust, etc.) to ensure smooth movement.
Troubleshooting
If you experience any issues with your chair, consider the following common solutions:
- Chair is wobbly: Check that all assembly screws are fully tightened, especially those connecting the seat to the backrest and the mechanism to the seat.
- Chair does not adjust height: Ensure the gas lift lever is fully engaged. If the issue persists, the gas lift cylinder may need replacement.
- Squeaking noises: Apply a small amount of silicone lubricant to moving parts, such as the tilt mechanism or where the gas lift meets the base. Ensure all screws are tight.
- Casters not rolling smoothly: Clean any hair or debris from the caster wheels.
For issues not resolved by these steps, please contact customer support.
Specifications
The image above provides detailed measurements of the chair, including overall height, seat width, and seat height range, which are crucial for understanding its physical dimensions and fit.
| Feature | Detail |
|---|---|
| Brand | TTY Store |
| Model Number | 840137908912 |
| Color | Black |
| Material | PU Leather, Foam Fill, Metal Base |
| Weight Capacity | Up to 250 pounds (113 kg) |
| Adjustable Features | Height, Tilt Lock, Tension Control, Lumbar Support, Headrest |
| Movement | 360-Degree Swivel, Smooth-Rolling Casters |
| Assembly Time | Approx. 10-15 minutes |
| Recommended Use | Office, Gaming |
Warranty and Support
TTY Store is committed to providing high-quality products and excellent customer service.
- Damaged Parts: If your item was damaged during transportation, please contact us immediately. We will send replacement parts free of charge within a few days.
- Satisfaction Guarantee: We are confident you will be satisfied with your ergonomic gaming chair. However, if you are not, please get in touch with us.
- Customer Service: Our well-trained customer service team is available to reply to your inquiries in a short time and provide assistance, aiming to give you a better shopping experience. Please rest assured to buy.
For support, please visit the TTY Store on Amazon or contact us directly through your purchase platform.