Raptor Series Magnum RT Gen 2 Drop Steps Running Boards Instruction Manual

1. Introduction

This manual provides comprehensive instructions for the proper installation, safe operation, and routine maintenance of your Raptor Series Magnum RT Gen 2 Drop Steps Running Boards. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of the product.

2. Product Overview

The Magnum RT Gen 2 Drop Steps are designed to provide enhanced vehicle access and a robust aesthetic. Constructed from cold-rolled 14-gauge steel, these running boards feature a unique angled drop step design and a durable black powder-coat finish.

Key Features:

Material: Cold rolled 14-gauge steel construction for durability.
Mounting: Heavy-duty one-quarter inch cold rolled steel mounting brackets.
Weight Rating: 500 pounds per side.
Step Area: 16 inches long and 4 inches wide, with slotted steps for grip and drainage.
Finish: 3-stage black powder coating process for corrosion resistance.

Two black Magnum RT Gen 2 Drop Steps Running Boards — Figure 2.1: Raptor Series Magnum RT Gen 2 Drop Steps Running Boards. These are the main components of the product, showcasing their design and finish.

3. Vehicle Compatibility

These running boards are specifically designed for:

Crew Cab 2019-2026 Silverado Sierra 1500
Crew Cab 2020-2026 Silverado Sierra 2500/3500 HD

Important: This product only fits Crew Cab models, which feature four full-size doors. It is not compatible with Regular Cab, Extended Cab, or Double Cab configurations.

Diagram illustrating different truck cab types, highlighting Crew Cab as compatible — Figure 3.1: Cab Type Compatibility. This diagram visually distinguishes between Regular, Extended, Double, and Crew Cab configurations, emphasizing that only Crew Cab is compatible with these running boards.

4. Package Contents

Verify that all components are present before beginning installation:

Driver side running board
Passenger side running board
Mounting brackets (specific to vehicle model)
Hardware kit for complete installation

Cardboard box labeled 'BRACKET KIT MAGNUM' with a checkmark and 'Brackets Included' text — Figure 4.1: Bracket Kit. This image shows the packaging for the included mounting brackets, confirming their presence in the package.

5. Installation Instructions

The Magnum RT Gen 2 Drop Steps are designed for a custom fit, no-drill application. Installation involves bolting the running boards to existing factory mounting points on the vehicle's rocker panel.

General Steps:

Identify the factory mounting points along the rocker panel of your vehicle.
Attach the heavy-duty mounting brackets to these factory points using the provided hardware. Ensure all bolts are securely tightened according to torque specifications (refer to vehicle service manual if available).
Position the running board onto the installed brackets.
Secure the running board to the brackets using the remaining hardware.
Repeat the process for the opposite side of the vehicle.
Verify that all connections are tight and the running boards are stable before use.

Note: While no drilling is required, specific bolt hole locations may vary slightly by vehicle model year. Consult your vehicle's owner's manual or a professional if you encounter difficulties.

White pickup truck with black running boards installed, viewed from the side — Figure 5.1: Installed Running Boards. This image shows the running boards properly installed on a white pickup truck, demonstrating the final appearance.

Close-up view of a black drop step installed on a white truck, showing the step area — Figure 5.2: Drop Step Detail. A close-up of the drop step section, illustrating its position relative to the vehicle and the textured step surface.

6. Operation

The Magnum RT Gen 2 Drop Steps provide a secure and convenient stepping surface for easier entry into and exit from your vehicle.

Step onto the 16-inch long by 4-inch wide step area.
The slotted design of the steps offers enhanced grip, even in wet or snowy conditions, and facilitates drainage of water, snow, or debris.
Each side of the running board is rated to support up to 500 pounds. Do not exceed this weight limit.

A person's foot stepping onto the textured surface of a running board — Figure 6.1: Stepping onto the Board. This image demonstrates the practical use of the drop step, showing a foot securely placed on the textured surface.

Close-up of the slotted step surface of the running board — Figure 6.2: Slotted Step Surface. A detailed view of the step's slotted design, which provides traction and allows for water and debris drainage.

7. Maintenance

To maintain the appearance and integrity of your running boards, follow these guidelines:

Regularly clean the running boards with mild soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the powder-coat finish.
Inspect all mounting hardware periodically for tightness. Re-tighten any loose bolts to ensure safety and prevent rattling.
The 3-stage powder coating process is designed to resist elements and corrosion. However, promptly address any chips or scratches in the finish to prevent rust formation.

8. Specifications

Attribute	Detail
Brand	Raptor Series
Model Name	GTS26CH
Color	Black
Material	Alloy Steel
Exterior Finish	Textured, Powder-Coated
Item Dimensions (L x W x H)	90 x 11 x 8 inches
Item Weight	57 Pounds
Weight Limit	500 Pounds
UPC	813443025482
Automotive Fit Type	Vehicle Specific Fit
Vehicle Service Type	Truck

9. Warranty Information

Raptor Series provides the following warranty for this product:

Limited Lifetime Manufacturer Warranty: Covers workmanship and structure.
10 Year Limited Manufacturer Warranty: Covers the finish.

For detailed warranty terms and conditions, please refer to the official Raptor Series warranty documentation or contact customer support.

Raptor Series GTS26CH