1. Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your WAC Lighting Cylinder LED Double Up and Down Wall Light. Please read this manual thoroughly before installation and retain it for future reference.
The WAC Lighting Cylinder LED Double Up and Down Wall Light is a versatile fixture designed for both indoor and outdoor applications. It features a sleek cylindrical design with integrated LED technology, providing both upward and downward illumination. Constructed from die-cast aluminum, it offers durability and resistance to fading and chipping. This fixture is UL and cUL listed for wet locations, ensuring suitability for various environments.
2. Safety Information
WARNING: Risk of electric shock. Disconnect power at the circuit breaker before installation or servicing.
- Installation must be performed by a qualified electrician in accordance with national and local electrical codes.
- Ensure the supply voltage is compatible with the fixture (120 Volts).
- Do not attempt to modify the fixture. Any modifications may void the warranty and create safety hazards.
- Handle the fixture with care to avoid damage to the LED components.
- Wear safety glasses and gloves during installation.
- This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
3. Package Contents
Verify that all components are present before beginning installation:
- 1x WAC Lighting Cylinder LED Double Up and Down Wall Light Fixture
- 1x Mounting Hardware Kit (screws, wire nuts)
- 1x Installation Instructions (this manual)
Image 1: WAC Lighting Cylinder LED Double Up and Down Wall Light. This image shows the black cylindrical fixture mounted on a square base, designed for both upward and downward light emission.
4. Installation
Tools Required: Screwdriver, wire strippers, electrical tape, safety glasses, gloves.
- Prepare for Installation: Turn off power at the circuit breaker to the junction box where the fixture will be installed.
- Mounting Bracket Installation: Attach the mounting bracket (included in hardware kit) to the junction box using the provided screws. Ensure the bracket is securely fastened.
- Wiring Connections:
- Connect the black wire from the fixture to the black (hot) wire from the junction box.
- Connect the white wire from the fixture to the white (neutral) wire from the junction box.
- Connect the green or bare copper ground wire from the fixture to the green or bare copper ground wire from the junction box.
- Fixture Attachment: Carefully align the fixture with the mounting bracket and secure it using the provided screws. Ensure the fixture is flush against the mounting surface.
- Restore Power: Once the fixture is securely installed and all connections are checked, restore power at the circuit breaker.
Image 2: Dimensional Diagram. This diagram illustrates the key measurements of the light fixture, including its width, height, and projection from the wall, which are important for installation planning.
5. Operating Instructions
This LED wall light is designed for simple operation.
- Power On/Off: The light is controlled by a standard wall switch connected to the electrical circuit. Flip the switch to turn the light on or off.
- Dimming Functionality: This fixture supports smooth and continuous dimming when used with an electronic low voltage (ELV) dimmer. It can dim down to 10% of its full brightness with compatible ELV dimmers. Ensure your dimmer switch is ELV compatible for optimal performance.
6. Maintenance
The WAC Lighting Cylinder LED Wall Light requires minimal maintenance.
- Cleaning: Disconnect power before cleaning. Wipe the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or electrical components.
- LED Longevity: The integrated LED module has a rated life of 50,000 hours and does not require bulb replacement.
- Inspection: Periodically inspect the fixture for any signs of damage or loose connections, especially if installed outdoors.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. Loose wiring connection. Faulty wall switch. | Check circuit breaker. Verify all wire connections are secure (power off first). Test or replace wall switch. |
| Light flickers or dims inconsistently. | Incompatible dimmer switch. Loose wiring. | Ensure an ELV dimmer is used. Check wiring connections (power off first). |
| Water inside the fixture (outdoor use). | Improper sealing during installation. Damaged fixture. | Ensure all seals and mounting surfaces are tight. Contact customer support if fixture is damaged. |
If troubleshooting steps do not resolve the issue, contact WAC Lighting customer support.
8. Specifications
| Model Number | WS-W190212-30-BK |
| Brand | WAC Lighting |
| Dimensions | 2.76 x 0.98 x 1.77 inches (Product Dimensions) / 12 Inches (Size) |
| Weight | 1.24 pounds |
| Material | Die-cast Aluminum (Fixture), Glass (Shade) |
| Color | Black |
| Light Source | Integrated LED |
| Color Temperature | 3000K (Warm White) |
| Brightness | 515 Lumens |
| Wattage | 18 Watts |
| Voltage | 120 Volts |
| CRI | 90 |
| Rated Hours | 50,000 hours |
| Dimming | Dimmable with Electronic Low Voltage (ELV) dimmers (dims to 10%) |
| Usage | Indoor/Outdoor (UL & cUL listed for Wet Locations) |
| Installation Type | Flush Mount |
| Compliance | ETL & cETL listed, CEC Title 24 Compliant |
9. Warranty and Support
This WAC Lighting product is covered by a 5-year limited manufacturer warranty. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or replacement parts, please contact WAC Lighting customer service:
- Website: www.waclighting.com
- Refer to your purchase receipt for specific contact details or visit the official WAC Lighting website for the most current support information.
Please have your model number (WS-W190212-30-BK) and date of purchase available when contacting support.
