Bluedio P(Particle) Wireless Earbuds User Manual

Introduction

The Bluedio P(Particle) Wireless Earbuds are designed to provide a superior audio experience with advanced features and comfortable wear. Featuring a 6mm driver and patented VFT technology, these earbuds deliver clear sound quality and powerful bass. With Bluetooth 5.0, they offer stable and instant connections. The intelligent design includes face recognition technology for automatic music playback control and a portable charging case providing up to 24 hours of total playtime.

What's in the Box

• Bluedio Particle Wireless Earbuds
• Charging Case
• USB-C Charging Cable
• User Manual
• Silicone Ear Tips (L, M, S sizes)

Image: Contents of the Bluedio P(Particle) Wireless Earbuds package, including the earbuds, charging case, USB-C cable, and various ear tip sizes.

Setup

1. Charging the Earbuds and Case

Before first use, ensure both the earbuds and the charging case are fully charged. Connect the provided USB-C cable to the charging port on the case and to a power source. The green LED light on the charging case indicates charging status:

• Green light shows on charging case: Always on when charging the case.
• Green light is off: When fully charged.
• Green light blinks: When earbuds are charging inside the case.
• Green light flashing: Indicates low power, needs to be charged.

Image: The Bluedio P(Particle) charging case with earbuds inside, showing the green LED indicator for charging status.

Video: Demonstrates connecting the USB-C cable to the charging case and the green LED light indicating charging.

2. Initial Pairing

The earbuds feature instant Bluetooth connection. Simply open the charging case, and the earbuds will automatically enter pairing mode. They will connect to the last paired device automatically. If pairing for the first time, follow these steps:

1. Ensure the earbuds are in the charging case and the case is charged.
2. Open the charging case lid. The earbuds will power on and enter pairing mode.
3. On your device (smartphone, tablet, etc.), go to Bluetooth settings.
4. Look for "Particle" in the list of available devices and select it to connect.
5. Once connected, you will hear a confirmation tone.

Image: The Bluedio P(Particle) Wireless Earbuds resting in their open charging case, ready for pairing.

Video: Shows the instant Bluetooth connection feature of the Bluedio P(Particle) earbuds when the charging case is opened.

Operating Instructions

1. Wearing the Earbuds

Select the silicone ear tips that provide the most comfortable and secure fit for your ears. The earbuds are designed for stable wearing, suitable for various activities including sports. Insert the earbuds gently into your ear canals, ensuring a snug fit to optimize sound quality and noise isolation.

Image: A man wearing the Bluedio P(Particle) Wireless Earbuds, demonstrating their ergonomic fit and comfort.

Video: Illustrates the process of placing the Bluedio P(Particle) earbuds into the ear for a secure and comfortable fit.

2. Earbud Controls

Each earbud features a multi-function button for easy control of music and calls:

• Single Press (Either Earbud): Play/Pause music, Answer/End call.
• Double Press (Right Earbud): Increase Volume.
• Double Press (Left Earbud): Decrease Volume.
• Triple Press (Right Earbud): Next Song.
• Triple Press (Left Earbud): Previous Song.
• Long Press (Either Earbud): Activate Voice Assistant (e.g., Siri, Google Assistant).

Image: A diagram illustrating the various touch controls on the Bluedio P(Particle) Wireless Earbuds for music playback, volume, and call management.

Video: Demonstrates the single, double, and triple press functions on the earbuds for controlling music playback and volume.

3. Face Recognition Technology (Auto Play/Pause)

The Bluedio P(Particle) earbuds feature a built-in touch sensor chip that intelligently senses the wearing status. This allows for automatic music control:

• When you take down only the RIGHT earbud from your ear, the music will automatically stop to save power.
• When you wear the RIGHT earbud again, the music will continue to play.

Video: Illustrates the built-in sensor chip that enables auto music play when earbuds are worn and pause when removed.

4. Single Earbud Operation

You can use either earbud independently. To use only one earbud:

1. Take both earbuds out of the charging case.
2. Turn off the earbud you do not wish to use by pressing and holding its multi-function button until the LED light turns off.
3. The remaining earbud will continue to be paired with your device.

Note: Some control functions (e.g., volume up/down, next/previous track) may be limited when using only one earbud, as they are assigned to specific left/right earbud presses.

Video: Demonstrates how to use a single earbud independently by turning off the other earbud.

Maintenance

1. Cleaning

Regularly clean your earbuds and charging case to ensure optimal performance and hygiene. Use a soft, dry, lint-free cloth to wipe down the surfaces. For ear tips, remove them and clean with a mild soap solution if necessary, then rinse thoroughly and dry completely before reattaching.

2. Replacing Ear Tips

The earbuds come with three sizes of silicone ear tips (L, M, S) to ensure a comfortable and secure fit. To replace an ear tip:

1. Gently pull off the existing ear tip from the earbud nozzle.
2. Select the desired size of ear tip.
3. Align the new ear tip with the earbud nozzle and push it on firmly until it clicks into place. Ensure it is securely attached and properly aligned with the notch on the earpiece.

Video: Shows how to remove and replace the silicone ear tips on the Bluedio P(Particle) earbuds.

Troubleshooting

• Earbuds not pairing: Ensure both earbuds are charged and in the case. Open the case lid to initiate pairing. If issues persist, try "forgetting" the device on your phone's Bluetooth settings and re-pairing.
• Only one earbud working: Check if the other earbud is charged. If using single earbud mode, ensure the unused earbud is properly turned off.
• Low volume or poor sound quality: Ensure ear tips are correctly sized and provide a good seal in your ear canal. Clean any debris from the earbud nozzles. Check device volume settings.
• Charging case not charging: Verify the USB-C cable is securely connected to both the case and the power source. Check the power source.

Specifications

Warranty and Support

Bluedio products come with a standard manufacturer's warranty. For detailed warranty information, technical support, or customer service inquiries, please refer to the official Bluedio website or contact their customer support team directly. Contact information can typically be found in the original product packaging or on the brand's official online channels.