OOWOLF 2-Piece Indoor/Outdoor LED Wall Light User Manual

1. Introduction

Thank you for choosing the OOWOLF 2-Piece Indoor/Outdoor LED Wall Light. This modern and durable wall sconce is designed to provide elegant up/down lighting for both indoor and outdoor environments. Featuring a robust aluminum construction with an IP65 waterproof rating, it ensures reliable performance in various weather conditions. The light comes with replaceable G9 4W 3000K warm white LED bulbs, offering energy efficiency and the flexibility to change bulbs as needed without replacing the entire fixture. This manual provides essential information for safe installation, operation, and maintenance of your new lighting fixture.

2. Safety Information

Please read all safety instructions carefully before installation and use. Failure to do so may result in electric shock, fire, or personal injury.

• Always turn off the main power supply at the circuit breaker before installing, servicing, or replacing any part of the fixture.
• Installation should be performed by a qualified electrician or a competent person.
• Ensure the voltage supply (220V) matches the requirements of the fixture.
• Do not modify the fixture in any way.
• Do not touch the bulb immediately after use, as it may be hot.
• Keep the fixture away from flammable materials.
• This product is IP65 rated for outdoor use, meaning it is protected against dust ingress and low-pressure water jets. However, avoid submerging the fixture in water.

3. Package Contents

Verify that all components are present and undamaged before proceeding with installation.

• 2 x OOWOLF LED Wall Lights
• 2 x G9 4W 3000K Warm White LED Bulbs
• Mounting Hardware (screws, wall plugs, hex key)
• User Manual

Figure 3.1: Package contents including the wall light, G9 bulb, and mounting hardware.

4. Setup and Installation

Follow these steps for proper installation of your OOWOLF LED Wall Light. Ensure power is OFF before starting.

1. Prepare the Installation Area: Choose a suitable wall location. Ensure the wall can support the fixture's weight and that electrical wiring is accessible. Turn off the main power supply to the circuit at the breaker.
2. Mark Drilling Points: Use the mounting bracket of the fixture to mark the drilling points on the wall.
3. Drill Holes: Drill holes at the marked points and insert the provided wall plugs.
4. Connect Wiring: Carefully connect the electrical wires from the wall to the fixture's terminals. Typically, this involves connecting Live (L), Neutral (N), and Ground (GND) wires. Ensure all connections are secure.
5. Mount the Fixture: Secure the fixture to the wall using the provided screws, aligning it with the wall plugs.
6. Insert G9 Bulb: Gently insert the G9 LED bulb into the socket within the fixture. Refer to Figure 4.1 for guidance.
7. Restore Power: Once the fixture is securely mounted and the bulb is installed, restore power at the circuit breaker.

Figure 4.1: Inserting the G9 LED bulb into the fixture.

Figure 4.2: Example of installed OOWOLF LED Wall Lights.

5. Operating Instructions

The OOWOLF LED Wall Light operates like any standard wired lighting fixture. Once installed and powered, it can be controlled via a wall switch or compatible smart switch/remote control system (not included).

• Turning On/Off: Use the connected wall switch to turn the light on or off.
• Compatibility: This fixture is compatible with standard 220V electrical systems and can be integrated into smart home lighting setups if controlled by a compatible smart switch.

Figure 5.1: Wall lights providing ambient lighting in an indoor setting.

6. Maintenance

Regular maintenance will help prolong the life and appearance of your OOWOLF LED Wall Light.

• Cleaning: To clean the fixture, ensure the power is off. Wipe the surface with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
• Bulb Replacement: The G9 LED bulb is replaceable. If the bulb needs to be replaced, ensure the power is off and the bulb has cooled down. Gently remove the old bulb and insert a new G9 LED bulb (max 4W, 220V).
• Weather Resistance: The IP65 rating provides protection against dust and water jets. Periodically check for any debris accumulation, especially in outdoor installations, and clean as necessary.

Figure 6.1: The IP65 waterproof design ensures durability in various weather conditions.

7. Troubleshooting

If you encounter issues with your OOWOLF LED Wall Light, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact OOWOLF customer support.

8. Specifications

9. Warranty and Support

OOWOLF provides a warranty for this product. If the G9 bulb or the glass cover is damaged within one year of purchase, you may contact us for a free replacement.

For any questions, technical assistance, or warranty claims, please contact OOWOLF customer support through the retailer's platform or the official OOWOLF website. Please have your purchase details and model number (-LL9Y) ready when contacting support.