Introduction
Thank you for choosing the SKINACT Sage Electric Spa Treatment Table. This manual provides essential information for the safe and efficient use, setup, operation, and maintenance of your new electric spa table. Please read this manual thoroughly before initial use and retain it for future reference.
Image: The SKINACT Sage Electric Spa Treatment Table in white upholstery with a natural wood finish base, shown from a front-side angle.
Safety Information
Adherence to the following safety guidelines is crucial for preventing injury and damage to the equipment:
- Always use the remote control to adjust the table's position slowly and carefully to prevent tipping.
- Keep the face-hole area clear of obstructions when the client is in the face-down position.
- Do not exceed the maximum weight capacity of 330 lbs (150 kg).
- Keep the table away from heat sources and sharp objects to prevent damage to the upholstery and potential injury.
- Ensure the power cord is not pinched or damaged. Do not operate the table if the power cord is compromised.
- Unplug the table from the power outlet before cleaning or performing any maintenance.
Setup
The SKINACT Sage Electric Spa Treatment Table is shipped fully assembled, simplifying the setup process.
Unpacking and Placement
- Carefully remove all packaging materials. Inspect the table for any signs of damage incurred during shipping. Report any damage to the carrier and SKINACT customer service immediately.
- Position the table on a flat, stable, and level surface. Ensure there is adequate space around the table for safe operation and client access.
- Locate a grounded electrical outlet within reach of the power cord. Avoid using extension cords if possible. If an extension cord is necessary, ensure it is rated for the table's power requirements.
Power Connection
- Plug the power cord securely into the grounded electrical outlet.
- The table is now ready for operation.
Image: A diagram illustrating the dimensions of the spa table, including length, width, height range, and maximum weight capacity of 330 lbs.
Operating Instructions
The SKINACT Sage Electric Spa Treatment Table features three motors for adjusting height, backrest, and central module inclination, all controlled via a wired remote.
Remote Control Functions
The remote control allows for precise adjustments to optimize client comfort and practitioner ergonomics.
Image: A close-up view of the wired remote control, showing buttons for height adjustment, backrest adjustment, central module adjustment, lock, power, reset, lamp, and heating functions.
- Height Adjustment: Use the dedicated buttons to raise or lower the entire table. The adjustable height range is 23 inches to 37 inches.
- Backrest Adjustment: Control the inclination of the backrest from 0° (flat) to +70° (upright position).
- Central Module Inclination: Adjust the central section of the table from 0° to +28° for various treatment positions.
- Lock Function: Press the 'LOCK' button to prevent accidental adjustments. Press again to unlock.
- Power Button: Turns the table's electrical functions on or off.
- Reset Button: Resets the table to a default flat position.
- Lamp Button: Activates or deactivates any integrated lighting (if applicable).
- Heating Button: Activates or deactivates the heating function (if applicable).
Image: A graphic depicting the spa table's height being adjusted up and down, indicated by green arrows.
Image: A graphic showing the backrest of the spa table inclining upwards, indicated by a green arrow.
Image: A graphic showing the central module of the spa table inclining upwards, indicated by a green arrow.
Towel Holder
The table includes a convenient towel holder located on the side of the base.
Image: A close-up view of the white metal towel holder extending from the wooden base of the spa table.
Maintenance
Proper maintenance ensures the longevity and hygienic condition of your spa treatment table.
Cleaning the Upholstery
- The table features high-quality, easy-cleaning PU upholstery.
- For general cleaning, wipe the upholstery with a dry cloth.
- For deeper cleaning or disinfection, use a mild, non-abrasive cleaner specifically designed for PU materials. Test any cleaning solution on an inconspicuous area first.
- Avoid harsh chemicals, solvents, or abrasive cleaning tools, as these can damage the upholstery.
- Ensure the table is completely dry before next use.
General Care
- Regularly inspect all moving parts and electrical connections for wear or damage.
- Keep the area around the motors and moving mechanisms free from dust and debris.
- Do not place heavy or sharp objects on the table when not in use.
Troubleshooting
If you encounter issues with your SKINACT Sage Electric Spa Treatment Table, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Table does not respond to remote control. | No power, remote control cable disconnected, or remote control locked. | Check if the power cord is securely plugged into a live outlet. Ensure the remote control cable is firmly connected to the table. Press the 'LOCK' button on the remote to unlock it. |
| Motors make unusual noise. | Obstruction in moving parts or motor issue. | Inspect for any obstructions under the table or near moving components. If the noise persists, discontinue use and contact customer support. |
| Table movement is jerky or inconsistent. | Power supply issue or motor malfunction. | Ensure the power supply is stable. Try resetting the table using the 'RESET' button. If the problem continues, contact customer support. |
If these steps do not resolve the issue, please contact SKINACT customer support for further assistance.
Specifications
| Feature | Detail |
|---|---|
| Model | Sage Electric Spa Treatment Table |
| Brand | SKINACT |
| Upholstery Material | PU upholstery |
| Cushion Thickness | 4 inches |
| Base Finish | Natural wood |
| Motors | 3 (for height, backrest, central module) |
| Adjustable Height Range | 23" - 37" |
| Backrest Inclination | 0° to +70° |
| Central Section Inclination | 0° to +28° |
| Product Dimensions (L x W x H) | 79.5" x 31" x 23"-37" (approx. 80 x 31 x 23 inches) |
| Item Weight | 200 lbs (90.7 kg) |
| Maximum Client Weight | 330 lbs (150 kg) |
| Assembly | Fully assembled |
| Product Care | Wipe with Dry Cloth |
Warranty and Support
Warranty Information
Specific warranty details for the SKINACT Sage Electric Spa Treatment Table are typically provided at the time of purchase or can be obtained directly from the manufacturer. Please retain your proof of purchase for warranty claims.
Customer Support
For technical assistance, parts, or warranty inquiries, please contact SKINACT customer service:
- Visit the official SKINACT store on Amazon: SKINACT Store
- Refer to the contact information provided with your purchase documentation.
