GOWIN PRELUDE

GOWIN Prelude Portable Bluetooth Speaker User Manual

Model: PRELUDE

Introduction

Welcome to the user manual for your GOWIN Prelude Portable Bluetooth Speaker. This guide provides detailed instructions on how to set up, operate, maintain, and troubleshoot your speaker to ensure optimal performance.

The GOWIN Prelude is a versatile and compact portable speaker designed for music enthusiasts on the go. It features Bluetooth connectivity for wireless audio streaming, an integrated FM radio, and a hands-free microphone for calls. Its rechargeable battery ensures hours of uninterrupted playback.

GOWIN Prelude Portable Bluetooth Speaker, front view

Figure 1: Front view of the GOWIN Prelude Portable Bluetooth Speaker.

Package Contents

Please check the box for the following items:

Product Overview

Controls and Ports

Familiarize yourself with the speaker's buttons and ports for easy operation.

Top view of GOWIN Prelude speaker showing control buttons

Figure 2: Top panel with control buttons (Power, Mode, Volume/Track).

Side view of GOWIN Prelude speaker showing USB, AUX, and Micro SD ports

Figure 3: Side panel with various input ports (USB, AUX, Micro SD, Micro USB charging).

Setup

Charging the Speaker

Before first use, fully charge the speaker.

  1. Connect the supplied Micro USB charging cable to the Micro USB port on the speaker.
  2. Connect the other end of the cable to a USB power adapter (e.g., phone charger, computer USB port) or a power bank.
  3. The charging indicator light will illuminate (color may vary, typically red) during charging and turn off or change color when fully charged.
  4. A full charge takes approximately 2-3 hours.

Note: The speaker has a built-in Lithium Ion battery. Do not attempt to replace it.

Operating Instructions

Power On/Off

Bluetooth Mode

The speaker will automatically enter Bluetooth pairing mode when powered on for the first time or if no other mode is selected.

  1. Ensure the speaker is powered on and in Bluetooth mode (indicated by a flashing blue LED or audible prompt). If not, short press the Mode (M) button to switch to Bluetooth mode.
  2. On your smartphone or Bluetooth-enabled device, enable Bluetooth and search for available devices.
  3. Select "GOWIN Prelude" from the list of devices.
  4. Once paired, the speaker will confirm with an audible prompt, and the LED indicator will stop flashing.
  5. You can now play audio from your device through the speaker.

Tip: The speaker will automatically reconnect to the last paired device if it's within range and Bluetooth is enabled.

Hands-Free Calling

When connected via Bluetooth, the speaker's built-in microphone allows for hands-free calls.

FM Radio Mode

  1. Short press the Mode (M) button to switch to FM Radio mode.
  2. To auto-scan and save available stations, long press the Play/Pause button. The speaker will scan and store stations automatically.
  3. Short press the Previous (-) or Next (+) buttons to switch between saved stations.

AUX Mode

For devices without Bluetooth, use the AUX input.

  1. Connect a 3.5mm audio cable (not included) from your audio device's headphone jack to the AUX port on the speaker.
  2. Short press the Mode (M) button to switch to AUX mode.
  3. Audio playback will be controlled directly from your connected device.

USB Drive / Micro SD Card Playback

The speaker supports audio playback from USB drives and Micro SD cards.

  1. Insert a USB drive into the USB port or a Micro SD card into the TF card slot.
  2. The speaker will automatically switch to the corresponding mode and begin playing audio files. If not, short press the Mode (M) button to select the correct mode.
  3. Use the Previous (-) and Next (+) buttons to navigate tracks.

Volume Control

Maintenance

Troubleshooting

ProblemSolution
Speaker does not turn on.Ensure the battery is charged. Connect the speaker to a power source using the Micro USB cable and try again after a few minutes.
Cannot pair with Bluetooth device.Make sure the speaker is in Bluetooth pairing mode (flashing LED). Ensure Bluetooth is enabled on your device and it's within 10 meters (33 feet) of the speaker. Forget "GOWIN Prelude" from your device's Bluetooth list and try pairing again.
No sound or low volume.Check the volume level on both the speaker and your connected device. Ensure the correct mode (Bluetooth, AUX, USB, TF) is selected. If using AUX, ensure the cable is fully inserted and not damaged.
FM radio reception is poor.Try repositioning the speaker. In some cases, connecting the Micro USB charging cable (without power) can act as an antenna to improve reception.
Speaker freezes or becomes unresponsive.Try turning the speaker off and then on again. If it doesn't respond, let the battery drain completely and then recharge it.

Specifications

Diagram showing GOWIN Prelude speaker dimensions and features

Figure 4: Key dimensions and features of the GOWIN Prelude speaker.

FeatureDetail
Model NamePrelude
BrandGOWIN
Connectivity TechnologyBluetooth, Auxiliary, USB, Micro SD
Speaker TypeSubwoofer
Special FeaturesBluetooth, Hands-Free Calling, FM Radio
Recommended UseMusic Players
Compatible DevicesSmartphone
Subwoofer Diameter45 mm
Max Speaker Output Power3 Watts
Impedance4 Ohm
Audio Output ModeMono, Stereo
MaterialPlastic
ColorBlack
Battery TypeLithium Ion (1 required, included)
Battery LifeUp to 4 Hours
Dimensions (L x W x H)14.4 x 12 x 4.1 cm
Weight220 g
WaterproofNo

Warranty and Support

The GOWIN Prelude Portable Bluetooth Speaker comes with a 1-Year Limited Warranty from the date of purchase. This warranty covers manufacturing defects and workmanship.

The warranty does not cover:

For warranty claims or technical support, please contact GOWIN customer service through their official channels. Refer to the contact information provided on the product packaging or the official GOWIN website.

Online Support: Visit the GOWIN Mexico store on Amazon for more information: GOWIN Mexico Store

Related Documents - PRELUDE

Preview Gowin Complex Multiplier IP User Guide
User guide for the Gowin Complex Multiplier IP, detailing its features, port descriptions, timing, configuration, and reference design. This IP is designed for complex number multiplication.
Preview Gowin_EMPU(GW1NS-4C) IDE Software: Comprehensive Reference Manual for Development
This reference manual provides detailed guidance on using the Gowin_EMPU(GW1NS-4C) IDE software, including setup and usage with ARM Keil MDK and GOWIN MCU Designer for embedded system development.
Preview Gowin Virtual Input Output Tool User Guide
User guide for the Gowin Virtual Input Output (GVIO) tool, a digital signal dynamic debugging tool for FPGAs. Covers configuration, usage, and joint debugging with GAO.
Preview Gowin XCORR IP User Guide
User guide for the Gowin XCORR IP, detailing its features, configuration, and usage for cross-correlation operations in FPGA designs. Covers input parameters, port descriptions, timing, and resource utilization.
Preview Gowin Software Tcl Commands User Guide
This user guide provides a comprehensive reference for the Tcl commands used with Gowin Software, detailing command-line interface operations for efficient project management and FPGA design flows, including command syntax, parameters, and examples.
Preview Gowin云源软件用户指南 - GOWIN
用户指南 for Gowin云源软件. This document provides comprehensive instructions and details on using the Gowin Yunyuan software, including its interface, project management, integrated tools, output files, and Tcl commands. It covers version information and support details.