SONA 4.0L Non-Stick Coated Air Pot SAP 919 User Manual

1. Important Safeguards

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons. Read all instructions carefully before operating this appliance.

• Do not touch hot surfaces. Use handles or knobs.
• To protect against electrical shock, do not immerse cord, plugs, or the appliance in water or other liquid.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
• Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner.
• The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock, or injury to persons.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter, or touch hot surfaces.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to “off”, then remove plug from wall outlet.
• Do not use appliance for other than intended use.
• Extreme caution must be used when moving an appliance containing hot water.

2. Product Overview

The SONA 4.0L Non-Stick Coated Air Pot SAP 919 is designed for efficient and convenient hot water dispensing. It features a Daikin (Japan) Non-Stick Coating Inner Pot for easy cleaning and microcomputer control for precise temperature management.

Figure 2.1: SONA SAP 919 Air Pot in operation, dispensing hot water.

Key Features:

• 4.0L Capacity: Suitable for families and various uses.
• Daikin (Japan) Non-Stick Coating Inner Pot: Ensures easy cleaning and maintenance.
• Microcomputer Control: Offers precise temperature management.
• 6 Keep Warm Temperature Settings: 45°C, 55°C, 65°C, 75°C, 85°C, 95°C for different beverage needs.
• 100% De-Chlorination Function: Improves water quality.
• Auto Re-Boil Function: Quickly reheats water to boiling point.
• Self-Cool Function: Allows for safe cooling of water.
• Energy-Saving Mode: Reduces power consumption.
• Auto Re-Boil and Safety Lock Functions: Enhances user safety and convenience.
• Overheat and Dry-Boil Protections: Prevents damage to the appliance.
• Electric and Push-Cup 2 Ways Dispense: Provides flexible dispensing options.
• Detachable Upper Lid Design: Facilitates easy cleaning.
• 304 Food Grade Stainless Steel Inner Lid: Ensures hygiene and durability.
• Wide Water Level Indicator: For easy monitoring of water volume.

Figure 2.2: Overview of key features and functions.

3. Package Contents

Please check that all items are present and in good condition upon unpacking:

• SONA 4.0L Non-Stick Coated Air Pot (SAP 919)
• Instruction Manual (this document)
• Warranty Card

4. Setup

4.1 Initial Cleaning

1. Remove all packaging materials, stickers, and labels from the air pot.
2. Wash the inner pot and detachable lid with warm, soapy water. Rinse thoroughly and dry.
3. Wipe the exterior of the air pot with a damp cloth. Do not immerse the main unit in water.

4.2 Filling with Water

1. Open the upper lid.
2. Fill the inner pot with fresh, clean water up to the MAX water level indicator. Do not overfill.
3. Close the upper lid securely.

4.3 Power Connection

1. Ensure the air pot is placed on a stable, flat, heat-resistant surface.
2. Plug the power cord into a grounded 220-240V~ 50/60Hz electrical outlet. The appliance will emit a beep and the display will light up.

5. Operating Instructions

5.1 Initial Boil and De-Chlorination

1. After filling with water and connecting power, the air pot will automatically begin the boiling process.
2. The 100% De-Chlorination function will activate during boiling to remove chlorine from the water.
3. Once boiling is complete, the air pot will automatically switch to the Keep Warm function at the default temperature setting.

5.2 Setting Keep Warm Temperature

The air pot offers 6 different Keep Warm temperature settings:

• 45°C: Ideal for milk or baby formula.
• 55°C: Suitable for lemon water.
• 65°C: Perfect for honey water.
• 75°C: Recommended for tea.
• 85°C: Optimal for coffee.
• 95°C: Best for instant noodles or other hot beverages requiring near-boiling water.

Figure 5.1: Recommended temperature settings for various beverages.

To change the Keep Warm temperature, press the 'Temperature Selection' button repeatedly until the desired temperature is displayed.

5.3 Dispensing Water

The SAP 919 offers two methods for dispensing hot water:

• Electric Dispense: Press the 'Dispense' button. Ensure the safety lock is disengaged if applicable.
• Push-Cup Dispense: Place your cup against the push-lever located behind the spout. The water will flow out.

5.4 Auto Re-Boil Function

If the water temperature drops significantly below the set Keep Warm temperature, the air pot will automatically re-boil the water to the boiling point before returning to the Keep Warm setting.

5.5 Safety Lock Function

The safety lock prevents accidental dispensing of hot water. To dispense, you may need to press the 'Unlock' or 'Safety Lock Release' button before pressing the 'Dispense' button. Refer to the control panel for specific button labels.

5.6 Energy-Saving Mode

Activate the Energy-Saving mode to reduce power consumption, especially during periods of non-use or overnight. Consult the control panel for the 'Energy Saving' button or setting. This mode helps in being electricity and eco-friendly.

6. Maintenance and Cleaning

Regular cleaning ensures optimal performance and extends the lifespan of your air pot.

6.1 Detachable Upper Lid Cleaning

The detachable upper lid simplifies cleaning:

1. Open the lid to tilt it at approximately 45 degrees.
2. Push the back of the lid to the front to detach it from the main unit.
3. Wash the lid, including the 304 Food Grade Stainless Steel inner lid, with warm, soapy water. Rinse thoroughly and dry.
4. Reattach the lid by aligning it with the hinges and pushing it back into place until it clicks securely.

Figure 6.1: Detaching the lid for cleaning.

6.2 Inner Pot Cleaning

The Daikin (Japan) Non-Stick Coating Inner Pot makes cleaning easy:

• After unplugging and allowing the unit to cool, empty any remaining water.
• Wipe the interior with a soft sponge or cloth and warm, soapy water.
• Rinse thoroughly by filling and emptying with clean water several times.
• Do not use abrasive cleaners, scouring pads, or metal brushes as these can damage the non-stick coating.

6.3 Exterior Cleaning

Wipe the exterior surface with a soft, damp cloth. Do not use harsh chemicals or immerse the unit in water.

6.4 Descaling

Over time, mineral deposits (limescale) may accumulate in the inner pot, especially in areas with hard water. To descale:

1. Fill the inner pot with a solution of water and white vinegar (e.g., 1 part vinegar to 2 parts water) or a commercial descaling agent suitable for electric kettles.
2. Allow the solution to soak for several hours or overnight, depending on the severity of the scale.
3. Boil the solution (if using vinegar, ensure good ventilation).
4. Empty the solution and rinse the inner pot thoroughly several times with clean water to remove any residue and odor.

7. Troubleshooting

If you encounter issues with your SONA Air Pot, please refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact SONA customer support.

8. Specifications

9. Warranty and Support

9.1 Product Warranty

This SONA SAP 919 Air Pot comes with a 3 Years Warranty on Electrical Parts from the date of purchase. Please retain your proof of purchase and the warranty card for any warranty claims. The warranty covers manufacturing defects in electrical components under normal household use.

The warranty does not cover:

• Damage caused by misuse, abuse, accident, or neglect.
• Damage from unauthorized repairs or modifications.
• Normal wear and tear.
• Commercial use.

9.2 Customer Support

For technical assistance, warranty claims, or general inquiries, please refer to the contact information provided on your warranty card or visit the official Sona website.