UBay 845-039-40B0

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

UBay 845-039-40B0 Remote Control User Manual

Model: 845-039-40B0

Introduction

This manual provides comprehensive instructions for the UBay 845-039-40B0 remote control, designed as a direct replacement for various Sharp LCD TV models. This remote control is pre-programmed and requires no additional setup or pairing. Simply insert batteries, and it is ready for use.

Compatible Sharp TV Models:

  • LC-60E69U
  • LC-40LE431U
  • LC-40LE431UA
  • LC-40LE433U
  • LC-40LE433UA
  • LC-40LE433
  • LC-40LE431
  • LC-60E69

Setup

Battery Installation

  1. Locate the battery compartment on the back of the remote control.
  2. Slide the battery cover downwards or in the direction indicated by an arrow to open it.
  3. Insert two AAA batteries (not included) into the compartment, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside.
  4. Replace the battery cover by sliding it back into position until it clicks securely.

The remote control is pre-programmed and does not require any additional setup or pairing with your Sharp TV. Once batteries are installed, it is ready for immediate use.

Back view of the UBay 845-039-40B0 remote control showing the battery compartment.

Image: Rear view of the remote control, highlighting the battery compartment for easy access and battery insertion.

Operating Instructions

This section details the functions of the buttons on your UBay 845-039-40B0 remote control.

Front view of the UBay 845-039-40B0 remote control with all buttons clearly visible.

Image: Front view of the UBay 845-039-40B0 remote control, displaying the layout of all control buttons.

Button Functions:

  • POWER (Red Button): Turns the TV on or off.
  • INPUT (Green Button): Selects the input source (e.g., HDMI, AV, Component).
  • 0-9 (Number Buttons): Directly selects TV channels or enters numerical values.
  • FLASH BACK: Switches between the current and previously viewed channel.
  • FREEZE: Pauses the current image on the screen.
  • AUDIO: Adjusts audio settings or selects audio tracks.
  • ENT: Confirms selections or enters data.
  • DISPLAY: Shows on-screen information about the current program or input.
  • MENU: Accesses the TV's main menu.
  • CH (Up/Down Arrows): Changes TV channels up or down.
  • VOL (Up/Down Arrows): Increases or decreases the volume level.
  • MUTE: Silences or restores the TV's audio.
  • TV: Switches to TV mode.
  • PC: Switches to PC input mode.
  • View Mode: Changes the screen display mode (e.g., wide, zoom).
  • AV Mode: Selects AV input mode.
  • Navigation Arrows (Up, Down, Left, Right): Navigates through menus and options.
  • ENTER (Center Button): Confirms selections within menus.
  • EXIT: Exits the current menu or function.
  • RETURN: Returns to the previous menu or screen.
  • SLEEP: Sets a timer for the TV to automatically turn off.
  • CC (Closed Caption): Toggles closed captions on or off.
  • ADD/ERASE: Function for adding or erasing channels (may vary by TV model).
  • FAV (Favorite): Accesses favorite channels list.

Maintenance

Cleaning the Remote Control

  • Wipe the remote control with a soft, dry cloth.
  • For stubborn dirt, lightly dampen the cloth with water or a mild, non-abrasive cleaner. Ensure no liquid enters the remote.
  • Avoid using harsh chemicals, solvents, or abrasive cleaning pads, as these can damage the remote's surface and buttons.

Battery Care

  • Replace batteries when the remote's response becomes sluggish or inconsistent.
  • Always replace both batteries at the same time with new ones of the same type (AAA).
  • If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage.
  • Dispose of used batteries according to local regulations.

Troubleshooting

If you experience issues with your remote control, please refer to the following common problems and solutions:

ProblemSolution
Remote control is not responding.
  • Ensure batteries are inserted correctly with the correct polarity (+/-).
  • Replace old batteries with new AAA batteries.
  • Check for any obstructions between the remote control and the TV's infrared sensor.
  • Ensure you are within the effective range and pointing the remote directly at the TV.
Some buttons are not working.
  • Clean the remote control, especially around the non-functional buttons, to remove any dirt or debris.
  • Replace batteries, as low power can sometimes cause intermittent button functionality.
Remote control works intermittently.
  • This often indicates low battery power. Replace the batteries.
  • Ensure there is no strong light source (like direct sunlight or bright fluorescent lights) interfering with the IR signal.

Specifications

FeatureDetail
Model Number845-039-40B0
BrandUBay
Compatible DevicesSharp LCD Televisions
Connectivity TechnologyInfrared (IR)
Power Source2 x AAA Batteries (not included)
Product Dimensions7 x 1.7 x 0.7 inches (17.78 x 4.32 x 1.78 cm)
Item Weight2.04 ounces (57.8 grams)
Special FeatureErgonomic design

Support and Warranty

For any issues or questions regarding your UBay 845-039-40B0 remote control, please refer to the retailer where the product was purchased.

Return Policy:

This product is typically covered by a 30-day hassle-free return policy. Please consult your purchase receipt or the retailer's return policy for specific terms and conditions.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.