Introduction
The PARADOX TM70 Touch Intuitive Touchscreen Keypad is designed to provide a user-friendly interface for advanced alarm systems and home automation. Its larger 7-inch screen allows for more information to be displayed, enhancing convenience and usability compared to previous models. This keypad integrates seamlessly with Paradox Digiplex Evo, Spectra, and Magellan control units, simplifying daily operations.
Key features include an intuitive menu system, floor plan display for immediate localization of violated detectors, and a synoptic table mode for viewing the status of all partitions and lines on a single screen. A complement to the alarm system functions is the possibility to display indoor and outdoor temperatures (with an extra sensor). In screen-saving mode, the touchscreen can be used as a "Photo Frame" displaying images saved on a microSD card.
Product Features
- 7-Inch Color Touch Screen: Resolution of 800 x 400 pixels, providing a clear and detailed display.
- Intuitive Interface: Features user-friendly menus and icons with ultra-fast response time for smooth navigation.
- Floor Plan Display: Allows uploading up to 32 floor plans for graphic verification of zone locations, customizable with illustrations or photographs.
- External SD Media Card Slot: Includes a 4 GB slot (2 GB free space) for uploading photos, enabling digital picture frame functionality.
- Customizable Labels: Users can customize and edit labels for zones, areas, users, and PGM outputs.
- Multi-language Support: Available in a number of languages.
- One Screen Monitoring: Displays arming status of all partitions and zones.
- Solo Test Mode: Allows testing all system zones directly from the screen.
- Temperature Sensor: Built-in support for indoor temperature display (external sensor required for outdoor).
- Tamper Protection: Built-in cover and wall tamper detection.
- Auto Dim: Automatic display dimming feature.
- Chime Zones: Independently settable chime zones.
Setup and Installation
Follow these steps for proper installation of your TM70 Touchscreen Keypad.
Mounting the Keypad
- Separate the Top Assembly: Carefully separate the top assembly from the back plate. Insert a flathead screwdriver into the tab located on the side, as shown in Figure 1.
- Mount the Back Plate: Mount the back plate securely to the wall or a gang box using appropriate screws. Ensure the "UP" arrow on the back plate is in the correct upward position.
Note: We recommend feeding the TM70 with 18 gauge wire for optimal performance.
Figure 1: Illustration showing how to separate the top assembly from the back plate using a flathead screwdriver and the correct orientation for mounting the back plate. The tab location for separation is clearly indicated.
SD Card Installation
The TM70 keypad includes an external SD media card slot. This slot is used for uploading photos for the digital picture frame mode and for system updates. The keypad comes with a 4GB SD card, with 2GB of free space available for user content.
Figure 2: Diagram illustrating the location of the SD card slot and cover on both the TM70 and TM50 keypads, showing how to insert the SD card. The gang box mounting points are also visible.
Operating Instructions
The TM70 keypad offers an intuitive touch interface for managing your security system. Here are some basic operating guidelines:
Navigating the Menu
- Touch Screen: Interact with the keypad by touching the icons and menu options displayed on the 7-inch screen.
- Scrolling: Swipe left or right, or up and down, to navigate through pages and lists. The keypad features ultra-fast response time for smooth scrolling.
- Menu-Driven Prompts: Follow the clear and precise prompts on the screen to perform various functions.
Monitoring System Status
- One Screen Monitoring: View the arming status of all partitions and zones simultaneously on a single screen.
- Synoptic Table Mode: Access this mode to get an overview of the status of all partitions and lines.
- Spoton Alarm Locator: Utilize this feature for immediate localization of violated detectors, especially when floor plans are uploaded.
Customization and Settings
- Customizable Labels: Personalize names for zones, areas, users, and PGM outputs for easier identification.
- Language Selection: Choose your preferred language from the available options in the settings menu.
- Digital Photo Frame: In screen-saving mode, the keypad can display images saved on the microSD card. To use this feature, ensure images are loaded onto the SD card.
- Temperature Display: If an external sensor is connected, the keypad can display indoor and outdoor temperatures.
Alarm Functions
- Panic, Fire, and Auxiliary Alarms: The keypad supports hold-down panic, fire, and auxiliary alarms. Refer to your main control panel manual for specific activation procedures.
- Chime Zones: Configure specific zones to chime when opened or closed.
Maintenance
To ensure the longevity and optimal performance of your TM70 Touchscreen Keypad, follow these maintenance guidelines:
- Cleaning: Use a soft, dry, lint-free cloth to clean the screen and exterior. Do not use abrasive cleaners, solvents, or aerosol sprays, as these can damage the surface.
- Environmental Conditions: Ensure the keypad is installed in an environment within its specified operating temperature and humidity ranges. Avoid direct sunlight, excessive moisture, and extreme temperatures.
- Software Updates: Periodically check for firmware updates from PARADOX to ensure your keypad has the latest features and security enhancements. Updates can typically be performed via the SD card.
- SD Card Management: If using the digital photo frame feature, regularly manage the content on your SD card to ensure sufficient free space and optimal performance.
Troubleshooting
This section provides solutions to common issues you might encounter with your TM70 Touchscreen Keypad.
| Problem | Possible Cause | Solution |
|---|---|---|
| Keypad screen is blank or unresponsive. | No power, loose connection, or system fault. |
|
| Cannot upload floor plans or photos. | Incorrect file format, SD card issue, or insufficient space. |
|
| Keypad not communicating with control panel. | Wiring issue, incorrect addressing, or panel fault. |
|
Technical Specifications
| Feature | TM70 | TM50 (for comparison) |
|---|---|---|
| Power Input | 9 to 15 VDC | 9 to 15 VDC |
| Consumption | 250mA at max brightness + 80mA sounder | 150mA at max brightness + 80mA sounder |
| Wire Connection | 18 Gauge | 18 Gauge recommended, 22 Gauge |
| Display | 7" 800 x 480 | 5" 480 x 272 |
| Dimensions | 17.7 x 11.4 x 1.5 cm (7 x 4.5 x 0.6 in.) | 14.2 x 9.5 x 1.4 cm (5.6 x 3.75 x 0.56 in.) |
| Humidity | 5-90% | 5-90% |
| Indoor Temp. | Yes | Yes |
| SD Card | 4GB; 2GB free | 4GB; 2GB free |
| Input | Zone | Zone |
| Tamper | Built-in, Cover and Wall | Built-in, Cover and Wall |
| Compatibility | Swan, EVO, Spectra, Magellan | Swan, EVO, Spectra, Magellan |
| Remote Upgrade | Swan only | Swan only |
| Jpeg Download | Swan via Bus, EVO/Spectra SD Card | Swan via Bus, EVO/Spectra SD Card |
| Auto Dim | Yes | Yes |
| Chime | Yes | Yes |
Note: This table provides a comparison between the TM70 and TM50 models based on available specifications.
Warranty Information
PARADOX products are manufactured under strict quality standards. For detailed warranty terms and conditions, please refer to the official PARADOX website or contact your authorized dealer. Keep your proof of purchase for warranty claims.
Customer Support
For technical assistance, product inquiries, or support, please contact PARADOX customer service or visit their official support portal. You can find contact information on the PARADOX website (www.paradox.com).
When contacting support, please have your product model (TM70) and serial number ready to expedite the process.
