1. Introduction
This manual provides essential information for the safe installation, operation, and maintenance of your Globo 54008-2 Adjustable Black Ceiling Spot Light. Please read these instructions carefully before installation and retain them for future reference.
The Globo 54008-2 is a two-fold ceiling spotlight designed to provide versatile illumination. Its adjustable spots allow for targeted lighting, making it suitable for various rooms and interior styles. The fixture accommodates two E27 bulbs, with a maximum wattage of 60W per bulb, and is compatible with energy-saving or LED light sources (bulbs not included).
2. Safety Information
- Electrical Safety: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Always disconnect power at the main circuit breaker before installation, maintenance, or bulb replacement.
- Voltage: Ensure the supply voltage matches the fixture's requirements (220-240V, 50-60Hz).
- Bulb Type: Use only E27 bulbs with a maximum wattage of 60W per socket. Do not exceed the specified wattage.
- Heat: Light sources can become hot. Allow bulbs to cool before touching or replacing them.
- Environment: This fixture is designed for indoor use only. Do not expose to moisture or extreme temperatures.
- Cleaning: Do not use abrasive cleaners or solvents. Refer to the maintenance section for cleaning instructions.
3. Package Contents
Verify that all components are present and undamaged before proceeding with installation.
- 1 x Globo 54008-2 Ceiling Spot Light Fixture (Black, Metal)
- Mounting hardware (screws, wall plugs)
- Instruction Manual
Note: Light bulbs are not included and must be purchased separately.
4. Setup and Installation
Tools Required: Screwdriver, drill, wire strippers, voltage tester, pencil, measuring tape.
- Preparation: Turn off the main power supply at the circuit breaker before starting any electrical work.
- Mounting Location: Choose a suitable location on the ceiling. Ensure there are no hidden electrical wires or pipes in the drilling area.
- Marking: Hold the mounting bracket against the ceiling at the desired position and mark the drilling points with a pencil.
- Drilling: Drill holes at the marked points. Insert appropriate wall plugs if necessary.
- Wiring: Connect the fixture's wires to the household electrical wires. Ensure correct polarity (Live to Live, Neutral to Neutral, Earth to Earth). Secure all connections with terminal blocks.
- Mounting the Fixture: Attach the fixture to the ceiling using the provided screws, ensuring it is securely fastened.
- Install Bulbs: Carefully screw two E27 bulbs (max. 60W each) into the sockets. Do not overtighten.
- Final Check: Ensure all connections are secure and the fixture is properly mounted. Restore power at the circuit breaker.
Figure 1: Technical drawing with dimensions (Length: 30 cm, Width: 8 cm, Height: 15.5 cm).
5. Operating Instructions
Once installed and powered, the Globo 54008-2 ceiling spot light operates via your standard wall switch. The individual spot heads are adjustable, allowing you to direct the light as needed.
- Turning On/Off: Use the wall switch connected to the fixture to turn the light on or off.
- Adjusting Spots: Gently pivot or tilt the individual spot heads to direct the light beam to your desired area. Do not force the movement beyond its natural range.
Figure 2: Angled view of the ceiling spot light with bulbs.
Figure 3: Front view of the ceiling spot light.
Figure 4: Close-up of an adjustable spot head.
6. Maintenance
- Cleaning: Always disconnect power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use liquid or abrasive cleaners, as they may damage the finish.
- Bulb Replacement: Ensure the power is off and the bulbs have cooled completely. Unscrew the old bulb counter-clockwise and screw in a new E27 bulb (max. 60W) clockwise. Do not overtighten.
- Inspection: Periodically check the fixture for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply Faulty bulb Loose wiring connection | Check circuit breaker. Replace bulb. Check wiring (ensure power is off). |
| Light flickers | Loose bulb Incompatible dimmer (if applicable) Faulty wiring | Tighten bulb. Ensure dimmer is compatible with LED/CFL bulbs. Consult an electrician. |
| Fixture gets too hot | Bulb wattage too high | Replace with bulbs that do not exceed 60W per socket. |
8. Specifications
- Brand: GLOBO
- Model Number: 54008-2
- Material: Metal
- Color: Black
- Dimensions (L x W x H): 30 cm x 8 cm x 15.5 cm
- Weight: 1 Kilogram
- Number of Lights: 2
- Socket Type: E27
- Max. Wattage per Bulb: 60 Watt
- Voltage: 230V
- Power Source: AC (Likspänning - Direct Current is incorrect, assuming standard AC for household lighting)
- Special Features: Adjustable Spot Heads
- Batteries Required: No
- EU Energy Efficiency Label: Not Rated
9. Warranty and Support
For warranty information or technical support, please refer to the retailer where the product was purchased or contact GLOBO customer service directly. Keep your proof of purchase for any warranty claims.
Manufacturer: Globo
First Available Date: March 30, 2020
