Diyeeni DIY Smartphone Projector 2.0 Instruction Manual

1. Introduction

The Diyeeni DIY Smartphone Projector 2.0 is a portable device designed to magnify and project content from your smartphone onto a flat surface. This device offers an 8x image magnification, transforming your mobile viewing experience into a small home theater setup. It is intended as an entertainment device for casual use.

Image 1.1: The Diyeeni DIY Smartphone Projector 2.0, fully assembled, shown with its lens and a small accessory tray.

This manual provides instructions for assembly, operation, and basic troubleshooting to ensure proper use of your projector.

2. Package Contents

Please verify that all the following components are included in your package:

• 1x Paper Tube (for the lens assembly)
• 1x Magnifying Lens
• 1x Back Stickers (for securing the phone)
• 1x Projection Paper Box (main body of the projector)

Image 2.1: The main components of the Diyeeni DIY Smartphone Projector 2.0, including the paper box, lens, and phone holder.

3. Setup and Assembly

The Diyeeni DIY Smartphone Projector 2.0 is designed for simple assembly. Follow these steps to set up your projector:

3.1 Unpacking

Carefully remove all components from the packaging. Ensure no parts are missing or damaged.

Image 3.1: A user unpacking the Diyeeni Smartphone Projector from its box.

3.2 Assembly of the Projection Box

Assemble the paper projection box according to the instructions provided on the packaging or included leaflet. This typically involves folding the cardboard along the pre-scored lines and securing it to form the projector's body.

3.3 Inserting the Lens

Insert the magnifying lens into the designated opening at the front of the paper tube, and then secure the paper tube into the front of the projection box.

3.4 Preparing for Smartphone Insertion

Extend the rear section of the projector box to create the compartment for your smartphone. Ensure the back stickers are placed correctly to hold the phone securely.

Image 3.2: The Diyeeni Smartphone Projector with its rear compartment extended, ready to receive a smartphone.

4. Operating Instructions

4.1 Smartphone Compatibility

This projector is compatible with smartphones no larger than 14.5 cm x 8 cm (approximately 5.8 inches screen size).

4.2 Inserting Your Smartphone

Place your smartphone into the rear compartment of the projector with the screen facing the lens. Ensure it is securely positioned using the back stickers.

Image 4.1: A hand inserting a smartphone into the projector's rear slot.

4.3 Projection and Adjustment

Point the projector towards a flat, light-colored surface in a darkened room for optimal viewing. The projector provides an 8x image magnification.

Image 4.2: The projector in use, displaying a video on a dark surface.

Adjust the distance between the projector and the projection surface to achieve the desired focus and image size.

5. Maintenance

To ensure the longevity and optimal performance of your Diyeeni DIY Smartphone Projector 2.0, follow these simple maintenance guidelines:

• Cleaning the Lens: Gently wipe the magnifying lens with a soft, lint-free cloth. Avoid abrasive materials or harsh chemicals that could scratch the lens.
• Storage: When not in use, store the projector in a dry, cool place away from direct sunlight and excessive humidity.
• Handling: Handle the projector with care, as it is constructed from paper-based materials. Avoid dropping or applying excessive force.

6. Troubleshooting

This section addresses common issues you might encounter while using the projector.

6.1 Image Appears Reversed or Upside Down

Due to the principle of the magnifying lens, the projected image may appear reversed or upside down. This is not a defect but a characteristic of the optical design.

• Upside Down Image: If the image is upside down, simply flip your smartphone 180 degrees within the projector compartment.
• Reversed Graphics (Mirror Image):
  • For Android Smartphones: You can download third-party software from the Google Play Store, such as "Ultimate Rotation Control," to manage image orientation and flip the display horizontally.
  • For iPhone: Navigate to "Settings" > "General" > "Accessibility" (or "Accessibility Features" depending on iOS version) to adjust display settings. Look for options related to screen rotation or display mirroring.

7. Specifications

8. Warranty and Support

Specific warranty information for the Diyeeni DIY Smartphone Projector 2.0 is not available in the provided product data. For details regarding warranty coverage, returns, or technical support, please refer to the documentation included with your purchase or contact the manufacturer directly.

You may also visit the Diyeeni Store on Amazon for additional product information or to contact their customer service.