NUU GARDEN Patio Bistro Set (Model SCD004-01) Instruction Manual

1. Introduction

Thank you for choosing the NUU GARDEN 3 Piece Cast Aluminum Bistro Table and Chairs Set, Model SCD004-01. This manual provides essential information for the safe assembly, operation, and maintenance of your new patio furniture. Please read these instructions thoroughly before assembly and retain them for future reference.

2. Safety Information

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Always wash hands after handling.

To ensure safe use and prevent injury or damage, please observe the following:

• Adjustable foot pads must be properly adjusted to prevent sliding and ensure stability.
• Follow all assembly instructions carefully and completely.
• Do not exceed the maximum weight capacity of 300 lbs per chair.
• Keep children and pets away from the assembly area. Small parts can be a choking hazard.
• Place the furniture on a flat, stable surface to prevent tipping.
• Regularly inspect all bolts and connections to ensure they remain tight.

3. Package Contents

Verify that all components are present before beginning assembly. The package includes:

• 1 x Round Dining Table
• 2 x Armchairs
• All necessary hardware for assembly

Image 3.1: The complete NUU GARDEN 3 Piece Cast Aluminum Bistro Set, featuring one round table and two armchairs.

4. Assembly Instructions

The NUU GARDEN Bistro Set is designed for easy assembly, typically taking less than 30 minutes. Instructions are included in the packaging. Please ensure all parts are accounted for and follow the steps below.

Tools Required:

• Hex wrench (usually included)
• Phillips head screwdriver (not always included, but recommended for some fasteners)

Step-by-Step Assembly:

1. Unpack all components and lay them out on a soft, clean surface to prevent scratches.
2. Identify all hardware and match them with the parts list in the included instructions.
3. Assemble the table base first, attaching the legs to the central support and then to the tabletop. Do not fully tighten bolts until all parts are aligned.
4. Assemble each chair by attaching the seat to the backrest and then securing the legs. Ensure all connections are firm.
5. Once all components are loosely assembled, place the furniture upright on a level surface.
6. Gradually tighten all bolts and screws, ensuring the furniture remains level and stable.
7. Check for any wobbling and adjust the foot pads as necessary.

Image 4.1: Detailed dimensions of the bistro table and chair, useful for planning placement and assembly.

5. Operating Instructions (Usage)

This bistro set is designed for outdoor use, providing a comfortable and stylish seating area.

• Umbrella Hole: The table features a 1.48-inch umbrella hole, allowing you to add a patio umbrella for shade and protection from UV rays or light rain. Ensure the umbrella base is stable and appropriate for the umbrella size.
• Adjustable Foot Pads: Each leg of the table and chairs is equipped with adjustable foot caps. Rotate these caps to level the furniture on uneven surfaces, preventing wobbling and protecting your patio or deck from scratches.
• Comfort: The chairs feature a concave seat, high backrest with a hollow design, and ergonomic armrests for enhanced comfort during use.

Image 5.1: Close-up view of the adjustable foot pads on the chair leg, designed to prevent sliding and floor scratches.

Image 5.2: Features of the chair including a concave seat for comfort, a high backrest for support, and ergonomic armrests to reduce tension.

6. Maintenance

Proper maintenance will extend the life and appearance of your NUU GARDEN Bistro Set.

• Cleaning: Wipe the furniture with a damp cloth and mild soap. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
• Weather Resistance: The set features an anti-rust coating for all-weather use, designed to resist fading and aging. However, for prolonged durability, especially in extreme weather conditions, consider using a furniture cover or storing the set indoors during off-seasons.
• Inspection: Periodically check all nuts and bolts to ensure they are securely tightened. Re-tighten if necessary.

7. Troubleshooting

If you encounter any issues with your bistro set, refer to the following common solutions:

• Wobbling: Ensure the furniture is placed on a level surface. Adjust the foot pads on each leg until stability is achieved. Check that all assembly bolts are securely tightened.
• Loose Parts: If any parts feel loose, re-tighten the corresponding bolts and screws using the provided tools. Do not overtighten.
• Difficulty Assembling: Review the step-by-step assembly instructions provided in the package. Ensure all parts are correctly oriented before tightening. If issues persist, contact customer support.

8. Specifications

9. Warranty and Support

Specific warranty details are not provided in the product information. For warranty claims, technical support, or replacement parts, please contact NUU GARDEN customer service directly through their official website or the retailer where the product was purchased. Always retain your proof of purchase.

10. Additional Product Views

Image 10.1: The bistro set positioned on a patio, showcasing its elegant design in an outdoor environment.

Image 10.2: The bistro set arranged on a balcony, demonstrating its suitability for smaller outdoor spaces.

Image 10.3: A detailed view of the intricate woven pattern on the bistro table's surface.

Image 10.4: A close-up of the decorative, hollow design on the backrest of the bistro chair.