Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Access Lighting Aqua Collection 62530LEDD-BG/OPL LED Vanity Light. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Image: The Access Lighting Aqua Collection 62530LEDD-BG/OPL LED Vanity Light shown in a bathroom environment.
Safety Information
Always follow basic safety precautions when installing or working with electrical fixtures. Failure to do so may result in serious injury or death.
- WARNING: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing.
- Consult a qualified electrician if you are unsure about the installation process.
- Ensure all electrical connections are made in accordance with local codes, ordinances, and the National Electric Code (NEC).
- Do not install this fixture in wet locations. It is designed for indoor use only.
- Handle the fixture with care to avoid damage to the LED components or glass shade.
- This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm (Proposition 65 warning).
Setup and Installation
Components Included
- LED Vanity Light Fixture (Model 62530LEDD-BG/OPL)
- Mounting Hardware (screws, wire nuts, mounting plate)
Image: Front view of the LED Vanity Light fixture.
Tools Required (Not Included)
- Phillips Head Screwdriver
- Flathead Screwdriver
- Wire Strippers
- Electrical Tape
- Safety Glasses
Installation Steps
- Turn Off Power: Locate the circuit breaker or fuse box that supplies power to the fixture location. Turn off the power completely.
- Prepare Mounting: Remove the old fixture (if applicable). Attach the mounting plate to the junction box using the provided screws. Ensure it is securely fastened.
- Make Electrical Connections: Carefully connect the fixture's wires to the house wires. Match black to black (live), white to white (neutral), and green or bare copper to green or bare copper (ground). Secure connections with wire nuts and electrical tape.
- Mount Fixture: Carefully align the fixture with the mounting plate and secure it using the provided screws. Ensure no wires are pinched during this step.
- Restore Power: Once the fixture is securely mounted and all connections are checked, restore power at the circuit breaker.
Image: Side view of the LED Vanity Light, showing its profile.
Operating Instructions
The Access Lighting 62530LEDD-BG/OPL LED Vanity Light is designed for simple operation.
- Standard Operation: Once installed and powered, the light can be turned on and off using a standard wall switch connected to the fixture's circuit.
- Remote Control (if applicable): If your model includes a remote control, refer to the separate remote control instructions for pairing and specific functions such as dimming or color temperature adjustment. The fixture supports remote control functionality.
- Touch Control (if applicable): Some models may feature touch control. Refer to specific product documentation for details on touch-sensitive areas and functions.
Maintenance
Your LED vanity light requires minimal maintenance to ensure long-lasting performance and appearance.
- Cleaning: To clean the fixture, ensure the power is off. Use a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or electrical components.
- LEDs: The integrated LED light source is designed for a long lifespan and is not user-replaceable. Do not attempt to replace the LEDs.
- Inspection: Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.
Troubleshooting
If you encounter issues with your vanity light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. Loose wiring connection. Faulty wall switch. | Check circuit breaker/fuse. Ensure all wire connections are secure (with power off). Test wall switch or consult electrician. |
| Light flickers or dims. | Loose wiring connection. Incompatible dimmer switch (if applicable). | Check all wire connections (with power off). Ensure dimmer switch is LED-compatible. |
| Light is not as bright as expected. | Incorrect power supply. Dimmer setting too low. | Verify voltage supply (120V). Adjust dimmer to maximum setting. |
Specifications
Detailed technical specifications for the 62530LEDD-BG/OPL LED Vanity Light:
- Brand: Access Lighting
- Model Name: 62530LEDD-BG/OPL
- Color: Brushed Gold
- Material: Aluminum (Fixture), Glass (Shade)
- Style: Modern, Transitional
- Light Fixture Form: Vanity
- Product Dimensions: 3.25"L x 3.25"W x 4.5"H
- Item Weight: 14.4 ounces
- Power Source: Corded Electric
- Installation Type: Surface-Mounted
- Light Source Type: LED
- Wattage: 16 watts
- Voltage: 120 Volts
- Brightness: 1280 Lumens
- Color Temperature: 3000 Kelvin (Warm White)
- Number of Light Sources: 1
- Control Method: Remote (and/or Touch, Wall Switch)
- Indoor/Outdoor Usage: Indoor
- Assembly Required: Yes
- UPC: 641594234817
Image: Detail of the fixture's end cap.
Warranty Information
This Access Lighting product is covered by a 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modifications.
Please retain your proof of purchase for warranty claims.
Customer Support
For technical assistance, warranty claims, or any questions regarding your Access Lighting Aqua Collection 62530LEDD-BG/OPL LED Vanity Light, please contact Access Lighting customer service.
Refer to the packaging or the official Access Lighting website for current contact information.