Medical king Shower Chair - Model SSZ-XZD01 User Manual

1. Important Safety Information

Please read all instructions carefully before assembly and use. Retain this manual for future reference.

• Before each use, confirm that the bath chair is correctly installed, all screws are tightened, and all four leg tubes are adjusted to the same height. Ensure the height adjustment pins are fully engaged in the holes.
• Ensure the chair is stable and does not wobble before sitting or standing.
• Do not climb or stand on the bath chair. It is designed for sitting only.
• After approximately two months of use, inspect the rubber foot pads for any signs of wear and replace if necessary to maintain anti-slip functionality.
• Always ensure the shower area is well-lit and free of obstructions.

2. Product Overview

The Medical king Shower Chair (Model SSZ-XZD01) is designed to provide a safe and comfortable seating solution for individuals requiring assistance during showering. Its lightweight, portable design and adjustable features make it suitable for various bathroom environments.

• Adjustable Height: Features 8 adjustable height settings, ranging from 13 inches to 19 inches, to accommodate individual user needs.
• Sturdy Construction: Made with aluminum legs for durability and anti-rust properties, supporting up to 350 lbs.
• Safety Features: Equipped with anti-slip rubber feet for enhanced stability and a non-slip textured seat with drainage holes to prevent water pooling.
• Compact Design: Special compact design to fit most bathtubs and showers, with built-in side handles for easy portability.
• Bonus Accessories: Includes a back scrubber and an additional sponge for convenience.

Image: Medical king Shower Chair in a modern shower setting, highlighting its compact and functional design.

3. Setup and Assembly

The Medical king Shower Chair is designed for tool-free assembly, making setup quick and easy.

3.1 Assembly Steps

1. Place the seat upside down on a clean, flat surface.
2. Insert the main frame tubes into the designated slots on the underside of the seat. Ensure they align with the grooves.
3. Secure the main frame tubes using the provided screws. Turn the knobs clockwise until they are hand-tight.
4. Insert the four leg extensions into the main frame tubes.
5. Adjust each leg to the desired height by pressing the brass pin and sliding the extension until the pin locks into a height adjustment hole. Ensure all four legs are set to the same height for stability.

Image: Close-up of a hand assembling the shower chair, demonstrating the tool-free assembly process with easy-to-turn knob screws.

3.2 Assembly Video Guide

4. Operating Instructions

4.1 Height Adjustment

The shower chair offers 8 levels of height adjustment to ensure optimal comfort and safety. To adjust the height:

1. Turn the chair upside down or tilt it to access the leg adjustment pins.
2. Press the brass pin on each leg extension.
3. Slide the leg extension up or down to the desired height. Ensure the pin snaps securely into one of the numbered holes.
4. Repeat for all four legs, ensuring they are all set to the same height for stability.

Image: A visual guide illustrating the various height adjustment options for the shower chair legs, with numbered holes for precise setting.

4.2 Placement and Stability

Place the shower chair directly on the shower floor or inside the bathtub. The anti-slip rubber feet are designed to provide strong suction on flat surfaces, ensuring the chair remains secure during use. The non-slip textured seat and drainage holes enhance user safety and comfort.

Image: Detailed view of the shower chair's non-slip textured seat surface and the secure, anti-slip suction cup design of its feet.

Image: The shower chair positioned in a shower, illustrating its stability and balance for safe sitting and standing.

5. Maintenance

To ensure the longevity and hygiene of your Medical king Shower Chair, follow these maintenance guidelines:

• Cleaning: The chair is anti-rust and easy to clean. Wipe down the seat and legs with a mild soap and water solution after each use. Rinse thoroughly and allow to air dry.
• Inspection: Regularly check all screws and connections to ensure they remain tight. Periodically inspect the rubber foot pads for any signs of wear, cracks, or damage. Replace worn foot pads immediately to maintain anti-slip safety.
• Storage: Store the chair in a dry place when not in use. Its compact size allows for easy storage in most bathrooms.

6. Troubleshooting

If you encounter any issues with your Medical king Shower Chair, please refer to the following common solutions:

• Wobbling Chair: Ensure all four legs are adjusted to the exact same height. Double-check that the height adjustment pins are fully engaged. Tighten all assembly screws.
• Slipping: Verify that the rubber foot pads are clean and free of soap residue or debris. Ensure the shower floor or bathtub surface is clean and dry before placing the chair. Inspect foot pads for wear and replace if necessary.
• Difficulty Adjusting Height: Ensure the brass pin is fully depressed when attempting to slide the leg extension. Clean any debris from the adjustment holes.

7. Specifications

8. Warranty and Support

For any questions, concerns, or support regarding your Medical king Shower Chair, please contact our customer service team.

Customer Service Email: cs@medicalkingusa.com

We are committed to providing high-quality products and excellent customer support.