Invicta Men's Specialty Silicone Quartz Watch 34097

Introduction

This manual provides essential information for the proper use, care, and maintenance of your Invicta Men's Specialty Silicone Quartz Watch, Model 34097. Please read these instructions carefully to ensure optimal performance and longevity of your timepiece.

Image: Front view of the Invicta Men's Specialty Silicone Quartz Watch 34097, featuring a black dial with gold-tone accents and a black silicone band.

Product Features

• Movement: Reliable Japanese Quartz movement for accurate timekeeping.
• Case: Durable Stainless Steel case with a 45mm diameter.
• Crystal: Flame Fusion crystal, offering enhanced scratch resistance.
• Bezel: Fixed bezel designed to protect the dial and crown.
• Band: Comfortable and flexible black Silicone band with a buckle clasp.
• Water Resistance: Water resistant up to 100 meters (330 feet).

Image: Diagram highlighting key features including the scratch-resistant Flame Fusion crystal, fixed bezel, and crown for time adjustment.

Image: Close-up view of the watch's silicone band and buckle clasp, emphasizing comfort and adjustability.

Setup

Setting the Time

1. Gently pull the crown (the knob on the side of the watch case) out to the first position.
2. Rotate the crown clockwise or counter-clockwise to set the hour and minute hands to the desired time.
3. Once the time is set, push the crown back into its original position to start the watch and ensure water resistance.

Image: View of the watch case back, indicating the quartz movement and water resistance details.

Operating Instructions

Water Resistance

Your Invicta 34097 watch is water resistant up to 100 meters (330 feet). This rating makes it suitable for showering, swimming, and snorkeling. It is not recommended for scuba diving or high-impact water sports where water pressure may exceed the watch's rating. Always ensure the crown is fully pushed in before any water exposure.

Image: Graphic illustrating the water resistance capabilities of the watch, showing suitability for various water activities up to 100 meters.

Maintenance

Cleaning Your Watch

To maintain the appearance of your watch, wipe the case and crystal with a soft, dry cloth. For the silicone band, a mild soap and water solution can be used, followed by thorough rinsing and drying. Avoid harsh chemicals or abrasive materials.

Battery Replacement

The watch is powered by a product-specific battery (included). When the battery needs replacement, it is recommended to take your watch to an authorized service center or a professional watchmaker to ensure proper sealing and maintain water resistance.

Troubleshooting

Watch Not Running

• Ensure the crown is fully pushed in. If it is pulled out, the watch will not run.
• If the watch still does not run, the battery may need to be replaced. Refer to the 'Battery Replacement' section.

Condensation Inside the Crystal

If you notice condensation inside the watch crystal, this may indicate a loss of water resistance. It is recommended to have the watch inspected by a professional watchmaker immediately to prevent further damage.

Specifications

Warranty and Support

This Invicta watch comes with a manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or visit the official Invicta website. For returns, Amazon's standard 30-day refund/replacement policy applies if purchased directly from Amazon.

Product Videos