1. Introduction and Overview
This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of your Elica 773 CT VETRO Slim Line SPF 3 Burner Gas Stove. Designed with an ultra-slim profile and a durable toughened glass top, this gas stove features forged brass burners for diverse cooking needs. Please read this manual thoroughly before using the appliance.

Image: Front view of the Elica 3 Burner Gas Stove, showcasing its sleek design and three burners.
2. Safety Instructions
Always prioritize safety when operating any gas appliance. Failure to follow these instructions may result in property damage, personal injury, or death.
- Professional Installation: Ensure the gas stove is installed by a qualified technician to prevent gas leaks and ensure proper ventilation.
- Ventilation: Use the gas stove in a well-ventilated area. Do not obstruct air vents.
- Gas Leaks: If you smell gas, immediately turn off the gas supply, open windows and doors, and do not operate any electrical switches or appliances. Contact your gas supplier or a qualified technician.
- Children and Pets: Keep children and pets away from the appliance during operation and when it is hot.
- Flammable Materials: Do not store or use flammable materials near the gas stove.
- Cookware: Use appropriate cookware that is stable and correctly sized for the burners.
- Unattended Operation: Never leave the gas stove unattended while cooking.
3. Product Components
Your Elica gas stove consists of the following main components:
- Toughened Glass Top: The main cooking surface, resistant to heat and stains.
- Forged Brass Burners: Three high-performance burners (1 Jumbo, 1 Medium, 1 Small) for various cooking needs.
- Square Enameled Pan Supports: Provides stable support for cookware over the burners.
- Control Knobs: Ergonomically designed knobs for manual ignition and flame control.
- 360° Swivel Gas Inlet: Allows for flexible gas pipe connection.

Image: Detailed view of the gas stove highlighting key components such as the slim design, brass burners, toughened glass top, ergonomic knobs, stable pan support, and 360° swivel gas inlet.
4. Setup and Installation
For optimal safety and performance, professional installation of your Elica gas stove is highly recommended. Ensure the installation area is flat, stable, and well-ventilated.
4.1 Placement
Place the gas stove on a stable, heat-resistant surface. Ensure adequate clearance from walls and overhead cabinets as per local safety regulations.
4.2 Gas Connection
Connect the gas stove to a suitable gas supply using a certified gas hose and regulator. The 360° swivel gas inlet allows for flexible connection from any direction. Always check for gas leaks after connection using a soapy water solution (bubbles indicate a leak).
4.3 Dimensions
The compact and slim design of this gas stove is ideal for various kitchen setups.
- Width: 77 cm
- Depth: 47 cm
- Height: 10.6 cm

Image: The gas stove with its dimensions clearly marked: 77 cm width, 47 cm depth, and 10.6 cm height, illustrating its slim design.
5. Operating Instructions
Follow these steps for safe and efficient operation of your gas stove.
5.1 Lighting a Burner (Manual Ignition)
- Ensure the gas supply is open.
- Place your cookware on the pan support over the desired burner.
- Push down and turn the corresponding control knob counter-clockwise to the 'ON' position.
- Immediately bring a lit matchstick or gas lighter close to the burner to ignite the flame.
- Once ignited, adjust the flame intensity by rotating the knob between the 'HIGH' and 'LOW' settings.
- To turn off the burner, rotate the knob clockwise to the 'OFF' position.
5.2 Burner Usage
The stove features three forged brass burners of different sizes to accommodate various cooking styles:
- Jumbo Burner: Ideal for high-flame cooking, such as deep frying or boiling large quantities.
- Medium Burner: Suitable for daily cooking tasks requiring moderate heat.
- Small Burner: Best for slow simmering, warming, or preparing smaller dishes.

Image: The gas stove illustrating the optimal use for each burner size: Jumbo for high-flame cooking, Medium for daily cooking, and Small for slow simmering.
6. Maintenance and Cleaning
Regular cleaning and maintenance will ensure the longevity and efficient performance of your Elica gas stove.
6.1 Cleaning the Toughened Glass Top
- Allow the stove to cool completely before cleaning.
- Wipe the glass surface with a soft cloth dampened with mild soap and water.
- For stubborn stains, use a non-abrasive cleaner specifically designed for glass or ceramic surfaces.
- Dry thoroughly with a clean, soft cloth to prevent water spots.
6.2 Cleaning Burners and Pan Supports
- Remove the pan supports and burner components (burner caps and bases) once they are cool.
- Wash them with warm soapy water. For brass burners, avoid harsh chemicals that may tarnish the material.
- Ensure all parts are completely dry before reassembling them. Moisture can affect ignition.
- Periodically check burner holes for blockages and clean with a fine wire or needle if necessary.

Image: A hand wiping the smooth toughened glass surface of the gas stove, demonstrating ease of cleaning.
7. Troubleshooting
Refer to the following table for common issues and their potential solutions. If the problem persists, contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Burner does not ignite | No gas supply, clogged burner holes, wet burner components. | Check gas cylinder/pipeline. Clean burner holes. Ensure burner components are dry and correctly placed. |
| Uneven flame | Clogged burner holes, improperly seated burner cap. | Clean burner holes. Ensure burner cap is correctly positioned. |
| Gas smell without ignition | Gas leak, knob left in 'ON' position. | Turn off gas supply, ventilate area. Check for leaks. Ensure knobs are in 'OFF' position. |
| Knob is stiff or hard to turn | Accumulated dirt or food debris. | Clean around the knob area. Do not force the knob. |
8. Specifications
Detailed specifications for the Elica 773 CT VETRO Slim Line SPF 3 Burner Gas Stove:
- Model Number: 773 CT VETRO SLIM LINE SPF
- Colour: Black
- Material: Stainless Steel (body), Toughened Glass (top), Forged Brass (burners)
- Heating Elements: 3 (1 Jumbo, 1 Medium, 1 Small)
- Controls Type: Knob
- Power Source Type: Gas Powered
- Item Dimensions (D x W x H): 47D x 77W x 10.6H Centimeters
- Item Weight: 10 Kilograms
- Special Feature: Manual Ignition, Ultra Slim Frame
- Included Components: Burner
- Country of Origin: India
9. Warranty Information
Your Elica 773 CT VETRO Slim Line SPF 3 Burner Gas Stove comes with comprehensive warranty coverage:
- 7 Year Warranty: On the Toughened Glass Top.
- 5 Year Warranty: On the Forged Brass Burners and Valves.
- 2 Year Comprehensive Warranty: From the date of purchase, covering manufacturing defects.
Please retain your purchase receipt for warranty claims. Terms and conditions apply.

Image: Visual representation of the warranty coverage: 7 years on glass, 5 years on burners and valves, and 2 years comprehensive warranty.
10. Customer Support
For any assistance, installation requests, repairs, or general inquiries, please contact Elica customer support:
- Toll-Free Line: 1800 233 0007
- Email: customercare@elica.in
Services offered include installation & demo, Annual Maintenance Contract (AMC) support, and general support & repairs.

Image: Information on Elica's customer support, including contact details for installation, AMC, and repair services.