Product Overview
The Minka Lavery 1049-701 Westchester County Semi Flush Ceiling Light is a 4-light fixture designed for indoor use, featuring a Farm House White finish with Gilded Gold Leaf accents. This fixture provides ambient lighting suitable for various rooms such as bathrooms, bedrooms, kitchens, and laundry rooms. It is ETL approved for damp locations.
Figure 1: Front view of the Minka Lavery 1049-701 Semi Flush Ceiling Light, showcasing its Farm House White finish and Gilded Gold Leaf details.
Figure 2: The Minka Lavery 1049-701 Semi Flush Ceiling Light as it appears when installed on a ceiling, providing an overhead perspective.
Safety Information
Always turn off the main power supply at the circuit breaker before beginning any electrical installation. Consult a qualified electrician if you are unsure about any part of the installation process. Ensure all wiring connections are secure and comply with local electrical codes. Do not exceed the maximum wattage specified for the bulbs.
- WARNING: Risk of electric shock. Disconnect power before installation.
- CAUTION: Use only bulbs of the specified type and wattage.
- This fixture is ETL Approved for DAMP Locations.
Setup and Installation
Tools Required:
- Phillips head screwdriver
- Wire strippers
- Electrical tape
- Ladder (for ceiling installation)
Package Contents:
- 1 x Minka Lavery 1049-701 Semi Flush Ceiling Light Fixture
- Mounting Hardware (screws, wire nuts, mounting plate)
- Bulbs are not included.
Installation Steps:
- Turn off Power: Locate the circuit breaker controlling the light fixture's location and turn off the power. Verify power is off using a voltage tester.
- Prepare Mounting: Remove the existing fixture (if any) and expose the junction box. Attach the mounting plate to the junction box using the provided screws.
- Wire Connections: Connect the fixture's wires to the corresponding house wires. Connect the black (hot) wire from the fixture to the black (hot) wire from the junction box. Connect the white (neutral) wire from the fixture to the white (neutral) wire from the junction box. Connect the ground wire from the fixture to the ground wire from the junction box. Secure connections with wire nuts and electrical tape.
- Attach Fixture: Carefully lift the fixture and align it with the mounting plate. Secure the fixture to the mounting plate using the provided screws.
- Install Bulbs: Insert four (4) B10.5-Type E12 Candelabra Base bulbs (not included) into the sockets. Do not exceed 60 watts per bulb, for a total of 240 watts.
- Restore Power: Turn the power back on at the circuit breaker.
Operating Instructions
This semi-flush ceiling light is designed for simple operation via a standard wall switch or a compatible dimmer switch (if dimmable feature is desired and supported by your bulbs and wiring). The fixture itself does not have an integrated switch.
- Turning On/Off: Use the wall switch connected to the fixture to turn the light on or off.
- Dimming (Optional): If you have installed dimmable E12 bulbs and a compatible dimmer switch, you can adjust the light intensity using the dimmer control.
Maintenance
Regular maintenance will help preserve the appearance and functionality of your Minka Lavery light fixture.
- Cleaning: To clean the fixture, ensure the power is off. Wipe with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
- Bulb Replacement: Before replacing bulbs, turn off the power at the circuit breaker. Allow bulbs to cool completely. Unscrew old bulbs and screw in new B10.5-Type E12 Candelabra Base bulbs, ensuring they do not exceed 60 watts each.
- Inspection: Periodically inspect the wiring and connections for any signs of wear or damage. If any issues are found, consult a qualified electrician.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. Loose wire connection. Faulty bulb. | Check circuit breaker. Ensure all wire connections are secure (turn off power first). Replace bulb(s). |
| Light flickers. | Loose bulb. Incorrect bulb type. Loose wiring. | Tighten bulb. Ensure correct bulb type (E12 Candelabra Base) and wattage. Check wire connections (turn off power first). |
| Dimming not working. | Non-dimmable bulbs. Incompatible dimmer switch. | Install dimmable E12 bulbs. Ensure dimmer switch is compatible with LED/incandescent bulbs. |
If troubleshooting steps do not resolve the issue, contact customer support or a qualified electrician.
Specifications
- Model: 1049-701
- Brand: Minka Lavery
- Dimensions: 15.75" L x 15.75" W x 14.75" H
- Weight: 5 lbs
- Material: Alloy Steel, Metal Shade
- Finish: Farm House White/Gilded Gold
- Light Source: 4 x B10.5-Type E12 Candelabra Base (bulbs not included)
- Max Wattage: 60 Watts per bulb, 240 Total Watts
- Voltage: 120 Volts (AC)
- Installation Type: Semi Flush Mount
- Indoor/Outdoor Usage: Indoor
- Special Feature: Dimmable (with compatible bulbs and dimmer)
- Certification: ETL Approved for Damp Locations
- UPC: 747396112534
Warranty Information
This Minka Lavery product comes with a One year limited warranty. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the warranty documentation included with your purchase or contact Minka Lavery customer support.
Customer Support
For technical assistance, replacement parts, or warranty claims, please contact Minka Lavery customer support:
- Website: www.minkalavery.com (Note: This is a placeholder URL, please refer to official product documentation for actual support contact details.)
- Phone: Refer to the contact information provided in the product packaging.
When contacting support, please have your model number (1049-701) and purchase date available.
