Prtukyt 6S

Prtukyt 6S Wireless Bluetooth Headset User Manual

Model: 6S (EC2601)

Introduction

Thank you for choosing the Prtukyt 6S Wireless Bluetooth Headset. This manual provides detailed instructions on how to set up, operate, maintain, and troubleshoot your new headphones. Please read this manual carefully before use to ensure optimal performance and longevity of your device.

Prtukyt 6S Wireless Bluetooth Headset in white and rose gold

Image: Prtukyt 6S Wireless Bluetooth Headset, showcasing its white and rose gold design with a 3.5mm audio jack and charging cable.

Package Contents

Please check the package for the following items:

What's in the box image showing headphones, cables, and manual

Image: An illustration of the package contents, including the Prtukyt 6S headphones, a 3.5mm audio cable, a USB charging cable, and the user manual.

Setup

Charging the Headset

Before first use, fully charge the headset. Connect the USB charging cable to the charging port on the headset and the other end to a USB power source (e.g., computer USB port, wall adapter). The indicator light will show charging status and turn off when fully charged. A full charge takes approximately 3 hours and provides up to 40 hours of listening time.

Prtukyt 6S headphones with 40 hours playtime graphic

Image: The Prtukyt 6S headphones with a graphic indicating "40 Hours Playtime," highlighting the long battery life after a full charge.

Powering On/Off

Operating Instructions

Bluetooth Pairing

  1. Ensure the headset is powered off.
  2. Press and hold the Power button for approximately 5 seconds until the indicator light flashes blue and red, indicating pairing mode.
  3. On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
  4. Select "6S" from the list of found devices.
  5. Once paired, the indicator light will turn solid blue.
Prtukyt 6S headphones showing Bluetooth connection and wired option

Image: The Prtukyt 6S headphones demonstrating both wireless Bluetooth connectivity with a phone screen showing "Connected" and the option for wired connection via a 3.5mm audio cable.

Wired Connection

When the battery is low or if you prefer a wired connection, use the included 3.5mm auxiliary audio cable. Plug one end into the audio jack on the headset and the other end into your audio device's 3.5mm port. The headset will automatically switch to wired mode.

Button Functions

Prtukyt 6S headphone button functions diagram

Image: A detailed diagram of the Prtukyt 6S headphone's controls, indicating the power button, volume up/next track, answer/hang up, volume down/previous track, mode button, audio cable port, SD/TF card slot, and USB charging port.

Headset Controls
Button/PortFunction
Power ButtonPower On/Off, Play/Pause (short press), Answer/End Call (short press)
"+" ButtonVolume Up (short press), Next Track (long press)
"-" ButtonVolume Down (short press), Previous Track (long press)
"M" (Mode) ButtonSwitch between Bluetooth, FM Radio, and SD Card modes
Audio Cable PortFor wired connection using 3.5mm auxiliary cable
SD/TF Card SlotInsert MicroSD/TF card for direct music playback
USB Charging PortFor charging the headset

FM Radio and SD Card Playback

Maintenance

Prtukyt 6S headphones comfortable earcups

Image: A close-up of the Prtukyt 6S headphone's comfortable and soft earcups, designed for extended wear and sound isolation.

Troubleshooting

Common Issues and Solutions
ProblemPossible CauseSolution
Headset does not power on.Low battery.Charge the headset fully.
Cannot pair via Bluetooth.Headset not in pairing mode; Bluetooth disabled on device; too far from device.Ensure headset is in pairing mode (flashing blue/red). Enable Bluetooth on your device. Move headset closer to device (within 10m).
No sound.Volume too low; incorrect mode; wired cable not fully inserted.Increase volume on headset and device. Ensure correct mode (Bluetooth, FM, SD). Check 3.5mm cable connection.
Poor sound quality.Weak Bluetooth signal; audio source issue.Move closer to the Bluetooth device. Try a different audio source or file.
Microphone not working during calls.Device settings; headset not selected as audio input.Check your device's audio input settings to ensure the headset is selected.

Specifications

FeatureDetail
BrandPrtukyt
Model Name6S
Model NumberEC2601
Connectivity TechnologyWired, Wireless (Bluetooth 4.2)
Headphone Jack3.5mm Jack
Form FactorOver-Ear (Circum-aural)
ColorWhite and Rose Gold
Special FeaturesHiFi Sound, Foldable Design, Built-in Microphone, FM Radio, SD Card Playback
Battery TypeLithium-polymer
Battery LifeUp to 40 hours (approx.)
Charging TimeApprox. 3 hours
MaterialPlastic, Leather
Water ResistanceWaterproof (Note: Avoid submerging. Designed for splash resistance.)

Warranty and Support

The Prtukyt 6S Wireless Bluetooth Headset comes with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects and issues arising from normal use.

If you encounter any problems with your product, please contact Prtukyt customer support. We are committed to providing the best service to every customer.

For support, please refer to the contact information provided on the product packaging or the official Prtukyt website.