GoControl GD00Z-8-GC Z-Wave Plus S2 Security Garage Door Remote Controller Instruction Manual

1. Overview

The GoControl GD00Z-8-GC Garage Door Remote Controller Accessory offers advanced control and convenience. This controller is compatible with most automatic garage door openers connected to a sectional garage door, integrating seamlessly into your Z-Wave smart home system for enhanced security and accessibility.

Important Compatibility Note: This controller is designed for use with sectional garage doors and compatible automatic garage door openers. Ensure your existing garage door opener is compatible before installation.

2. What's in the Box

• GoControl GD00Z-8-GC Controller
• 120V 50/60Hz Power Supply
• Tilt Sensor
• Mounting Bracket and Hardware

3. Setup and Installation

Follow these steps to properly install your GoControl GD00Z-8-GC Garage Door Remote Controller. Ensure all power to the garage door opener is disconnected before beginning installation.

3.1 Controller Placement and Wiring

Mount the main controller unit near your garage door opener. It can be attached to the side of the opener unit or a nearby stable surface using the provided mounting hardware or adhesive. Connect the power supply to the controller and plug it into a standard electrical outlet. The controller features a wiring harness with red and black wires that connect to your garage door opener's control terminals. Consult your garage door opener's manual to identify the correct terminals for a wired wall button connection. If the open/close function is reversed after initial setup, simply swap the red and black wires.

Image: The GoControl GD00Z-8-GC controller unit, showing the wiring harness (red and white/black wires) and the USB power adapter. The unit is compact and white.

3.2 Tilt Sensor Installation

The tilt sensor is crucial for monitoring the garage door's status (open or closed). It should be mounted on the top panel of your sectional garage door. Ensure the sensor is oriented correctly with the "UP" arrow pointing upwards. For proper functionality, the back cover of the tilt sensor must be securely attached. If using adhesive, clean the surface thoroughly before application. For a more permanent installation, screws can be used.

Tip: Some users have reported issues with the tilt sensor if the back cover is not fully attached during testing. Always ensure the back cover is on for accurate functionality.

3.3 Pairing with Z-Wave Hub

Once the hardware is installed, follow your Z-Wave hub's instructions to add the GoControl GD00Z-8-GC as a new device. Typically, this involves putting your hub into inclusion mode and then activating the pairing button on the GoControl unit. For optimal pairing, it is often recommended to perform the pairing process with the controller close to the Z-Wave hub before final mounting.

4. Operating Instructions

Control your garage door conveniently through your Z-Wave smart home system.

4.1 App Control

Use your Z-Wave compatible smart home app (e.g., SmartThings, Home Assistant) to open or close your garage door remotely. The app will display the current status of your garage door (open/closed) based on the tilt sensor's feedback.

4.2 Voice Control

Integrate with voice assistants like Amazon Alexa or Google Home through your Z-Wave hub. You can then use voice commands to operate your garage door. For security, some voice assistants may require a PIN or confirmation for opening the garage door.

4.3 Notifications and Alerts

Configure your smart home app to receive notifications when the garage door opens, closes, or remains open for an extended period. This feature enhances security and provides peace of mind.

5. Maintenance

To ensure continued optimal performance of your GoControl GD00Z-8-GC controller, consider the following maintenance tips:

• Regular Checks: Periodically check the physical connections of the wiring and the tilt sensor to ensure they are secure and free from damage.
• Cleaning: Keep the controller and sensor free from dust and debris. Use a soft, dry cloth for cleaning.
• Firmware Updates: Check your Z-Wave hub's app or manufacturer's website for any available firmware updates for the GoControl unit to ensure you have the latest features and security patches.

6. Troubleshooting

If you encounter issues with your GoControl GD00Z-8-GC, refer to these common troubleshooting steps:

• Door Not Responding:
  • Ensure the controller is powered and the indicator light is on.
  • Verify the red and black wires are correctly connected to your garage door opener's terminals. If the door operates in reverse (e.g., closes when commanded to open), swap the wires.
  • Check the Z-Wave network connection. Try re-pairing the device if necessary.
• Incorrect Door Status (Open/Closed):
  • Confirm the tilt sensor is securely mounted on the top panel of the garage door and the "UP" arrow is correctly oriented.
  • Ensure the tilt sensor's back cover is fully attached.
  • Check the tilt sensor's battery (if applicable, though this model's tilt sensor is typically wired or has a long-life battery).
• Z-Wave Connectivity Issues:
  • Ensure the controller is within range of your Z-Wave hub or a Z-Wave repeater.
  • Try excluding and then re-including the device from your Z-Wave network.
• Voice Control Not Working:
  • Verify the GoControl device is properly linked to your voice assistant through your Z-Wave hub's integration.
  • Check for any required PINs or voice confirmations set up in your voice assistant's settings for garage door control.

7. Specifications

8. Warranty and Support

Specific warranty information and detailed support contacts are typically provided with your product packaging or available on the GoControl official website. Please refer to those resources for the most accurate and up-to-date information regarding your product's warranty and technical support options.