VINGLI Upgraded Zero Gravity Chair Set of 2 Instruction Manual

1. Introduction

Thank you for choosing the VINGLI Upgraded Zero Gravity Chair Set. This manual provides essential information for the safe and effective use of your new chairs. Please read all instructions carefully before assembly and use, and retain this manual for future reference.

Important Safety Information

• For safe use, do not exceed the maximum weight capacity of 350 pounds.
• Always lock the knobs on each side of the chair to ensure stability when reclined.
• Ensure the chair is fully open and stable before sitting.
• Keep children and pets away from the chair during unfolding and folding to prevent injury.
• Do not stand on the chair.
• Avoid placing the chair on uneven surfaces.

2. Product Overview

The VINGLI Upgraded Zero Gravity Chair is designed for comfort and durability, suitable for various outdoor settings. Key features include:

• Upgraded Durability: Features thicker tubes, stronger double bungee ropes, and durable textile fabric for extended use.
• Better Stability: Lockable knobs on each side secure the chair at your desired angle, enhanced by a triangular support structure.
• Skid-Proof Design: Anti-skid elements on bottom tubes prevent slipping.
• Versatile Use: High-quality materials make it suitable for balconies, swimming pools, backyards, and lawns.
• Portable Size: Measures 70 inches in overall length when unfolded, with a width of 20.5 inches, accommodating most body types.

3. Setup Instructions

Your VINGLI Zero Gravity Chair comes pre-assembled and requires minimal setup. Follow these steps to unfold and prepare your chair for use:

1. Remove the chair from its packaging.
2. Gently pull the chair's frame apart until it fully extends into the upright sitting position.
3. Ensure all legs are firmly on the ground and the chair is stable before sitting.
4. Attach the removable tray to the side armrest by sliding it onto the designated clips.
5. Adjust the headrest pillow to your preferred height for optimal comfort.

4. Operating Instructions

The VINGLI Zero Gravity Chair offers adjustable reclining positions for personalized comfort.

Adjusting Recline Position

1. Sit comfortably in the chair.
2. To recline, gently push back with your body weight while holding the armrests. The chair will smoothly glide into a reclined position.
3. Once you reach your desired angle, locate the locking knobs on both armrests.
4. Turn the knobs to the 'Lock' position to secure the chair in place.
5. To return to an upright position, unlock the knobs, lean forward, and the chair will return to its original position. Re-lock the knobs if desired.

Using the Side Tray

The included side tray provides convenient storage for drinks and small items.

• Ensure the tray is securely attached to the armrest before placing items on it.
• The tray features two cup holders and slots for phones or other small accessories.
• Remove the tray before folding the chair for storage or transport.

5. Maintenance and Care

Proper maintenance will extend the life and appearance of your VINGLI Zero Gravity Chair.

• Cleaning: Wipe clean with a damp cloth and mild soap. Avoid harsh chemicals or abrasive cleaners.
• Drying: Allow the chair to air dry completely before folding and storing to prevent mildew.
• Storage: When not in use, especially during inclement weather or off-season, fold the chair and store it in a dry, protected area.
• Inspection: Periodically check all bolts, screws, and bungee cords to ensure they are tight and in good condition. Replace any worn or damaged parts immediately.

6. Troubleshooting

If you encounter any issues with your VINGLI Zero Gravity Chair, refer to the following common solutions:

• Chair does not recline smoothly: Check for any obstructions in the reclining mechanism. Ensure the bungee cords are properly tensioned and not tangled.
• Chair does not lock in position: Verify that the locking knobs on both armrests are fully engaged in the 'Lock' position. Ensure no debris is preventing the locking mechanism from functioning correctly.
• Chair feels unstable: Confirm that the chair is placed on a flat, level surface. Check that all frame components are securely connected and not bent or damaged. Ensure the chair is fully unfolded and locked.
• Side tray is loose: Ensure the tray is correctly slid onto the armrest clips until it clicks into place.

If problems persist, please contact VINGLI customer support for assistance.

7. Specifications

8. Warranty and Support

For warranty information, product support, or to inquire about replacement parts, please contact VINGLI customer service directly. Refer to the contact information provided with your purchase or visit the official VINGLI website.