1. Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your EGLO 98384A 3-Light Pendant. Please read this guide thoroughly before beginning installation and retain it for future reference. The Beleser three-light linear pendant by EGLO features smoked glass shades designed to provide focused downlight and ambient illumination.
2. Important Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing. Consult a qualified electrician if you are unsure about the installation process.
- Ensure all electrical connections comply with local codes and ordinances, as well as the National Electric Code (NEC).
- Do not install this fixture in wet locations. It is designed for indoor use only.
- Handle glass shades with care to prevent breakage.
- Use only the specified bulb type and wattage to avoid overheating.
- Keep flammable materials away from the light fixture.
- Always wear safety glasses during installation.
3. Package Contents
Verify that all components are present before beginning installation:
- 3-Light Pendant Fixture (with black hanging cords)
- Mounting Hardware
- Instruction Manual
Note: Bulbs are not included and must be purchased separately.
4. Product Overview
The EGLO 98384A is a 3-light linear pendant designed for indoor use. It features a matte black finish and smoked glass shades. The hanging length is adjustable to suit various ceiling heights and aesthetic preferences.
Figure 1: Product dimensions for the EGLO 98384A 3-Light Pendant. The fixture measures approximately 31.5 inches in length, 7.87 inches in width, and has an adjustable height up to 80.62 inches.
Figure 2: The EGLO 98384A 3-Light Pendant installed above a kitchen island, demonstrating its aesthetic and functional placement.
5. Setup and Installation
Professional installation is recommended. Ensure power is disconnected at the circuit breaker before proceeding.
- Prepare for Installation: Turn off power at the main circuit breaker. Clear the work area and gather necessary tools (screwdriver, wire strippers, electrical tape, ladder).
- Mount the Crossbar: Attach the mounting crossbar to the junction box in the ceiling using the provided screws. Ensure it is securely fastened.
- Adjust Hanging Length: Determine the desired hanging length for each pendant. The black hanging cords are adjustable. Loosen the set screws on the canopy to adjust the cord length, then tighten to secure.
- Make Electrical Connections:
- Connect the fixture's ground wire (usually bare copper or green) to the house ground wire.
- Connect the fixture's neutral wire (usually white) to the house neutral wire (white).
- Connect the fixture's hot wire (usually black) to the house hot wire (black).
- Secure all connections with wire nuts and wrap with electrical tape for added safety.
- Secure the Canopy: Carefully push the wires into the junction box and secure the fixture canopy to the mounting crossbar using the provided screws.
- Install Bulbs: Screw E26 base bulbs (not included) into each of the three sockets. Do not exceed the maximum wattage specified in the specifications section.
- Install Glass Shades: Carefully attach the smoked glass shades to each pendant.
- Restore Power: Turn the power back on at the circuit breaker and test the fixture.
Video 1: An overview of the EGLO brand, showcasing various lighting products and design philosophies. While not specific to installation, it provides context for the product's quality and design.
6. Operating Instructions
Once installed, the EGLO 98384A pendant operates like any standard light fixture controlled by a wall switch. It is designed to be dimmer compatible, allowing you to adjust light intensity when paired with compatible dimmable bulbs and a dimmer switch (sold separately). It is also LED compatible, supporting energy-efficient LED bulbs with an E26 base.
7. Maintenance
- Cleaning: Always disconnect power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or glass.
- Bulb Replacement: Ensure the fixture is cool and power is disconnected before replacing bulbs. Unscrew the old E26 base bulb and screw in a new one of the same type and wattage.
- Inspection: Periodically check all connections and mounting hardware to ensure they remain secure.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Lights flicker. |
|
|
If you experience issues not covered here, please contact EGLO customer support.
9. Specifications
| Model Number | 98384A |
| Brand | EGLO |
| Color | Matte Black |
| Material | Metal (Fixture), Glass (Shades) |
| Style | Pendant |
| Number of Light Sources | 3 |
| Bulb Base | E26 |
| Voltage | 120 Volts |
| Power Source | Corded Electric |
| Indoor/Outdoor Usage | Indoor |
| Special Features | Adjustable Hanging Length, Dimmer Compatible, LED Compatible |
| Item Weight | 5.93 pounds |
| Product Dimensions | 31.89 x 11.61 x 6.3 inches (L x W x H) |
10. Warranty and Support
The EGLO 98384A 3-Light Pendant comes with a 1-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. For warranty claims or technical support, please contact EGLO customer service through their official website or the retailer where the product was purchased.
Important Information: Please check your local laws before purchasing this product, as mentioned in the product details.
