Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your AFX Eva Fixed Rail LED 30W lighting fixture. Please read this manual thoroughly before beginning installation and retain it for future reference. This fixture features integrated LED modules, providing energy-efficient illumination.
Image 1: Overview of the AFX Eva Fixed Rail LED 30W fixture in polished chrome finish, featuring four adjustable LED light heads.
Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing. All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC).
- Consult a qualified electrician if you are unsure about the installation process.
- Do not install this fixture in wet locations.
- Ensure all wiring connections are secure and properly insulated.
- Do not exceed the specified voltage (120 Volts).
- This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Wash hands after handling.
Package Contents
Verify that all components are present before beginning installation:
- AFX Eva Fixed Rail LED 30W Fixture (1 unit)
- Mounting Hardware Kit (screws, wire nuts, mounting bracket)
- Instruction Manual
Setup and Installation
Follow these steps for proper installation. Professional installation is recommended.
- Turn Off Power: Locate the circuit breaker or fuse box controlling the power to the installation location. Turn off the power completely to prevent electrical shock.
- Prepare Mounting Surface: Ensure the mounting surface is clean, dry, and structurally sound to support the fixture's weight.
- Install Mounting Bracket: Attach the mounting bracket to the junction box using the provided screws. Ensure it is securely fastened.
- Make Electrical Connections:
- Connect the black wire from the fixture to the black (hot) wire from the junction box using a wire nut.
- Connect the white wire from the fixture to the white (neutral) wire from the junction box using a wire nut.
- Connect the ground wire from the fixture to the ground wire from the junction box (or to the green ground screw on the mounting bracket) using a wire nut.
- Carefully tuck all wires into the junction box.
- Attach Fixture: Align the fixture with the mounting bracket and secure it using the provided screws. Ensure the fixture is flush against the ceiling/wall and stable.
- Adjust Light Heads: The individual LED light heads can be adjusted to direct light as desired.
- Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker or fuse box.
Image 2: Dimensional diagram of the AFX Eva Fixed Rail LED 30W fixture, showing length (L), width (W), and height (H) for installation planning.
Operating Instructions
The AFX Eva Fixed Rail LED 30W fixture operates via a standard wall switch connected to the electrical circuit. Simply toggle the wall switch to turn the light fixture on or off.
Image 3: Close-up view of one of the adjustable LED light heads on the AFX Eva Fixed Rail fixture, highlighting its polished chrome finish and integrated LED.
Maintenance
This fixture features integrated LED modules that are designed for long-term use and do not require bulb replacement.
- Cleaning: To clean the fixture, ensure power is turned off. Use a soft, dry, or slightly damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
- Inspection: Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fixture does not light up. |
|
|
| Light is dim or flickers. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Model Number | EVAF0618L30D1PC |
| Brand | AFX |
| Power Source | Corded Electric |
| Voltage | 120 Volts |
| Wattage (per module) | 7.5 watts |
| Total Wattage | 30 watts (4 x 7.5W integrated LED modules) |
| Luminous Flux (per module) | 625 Lumen |
| Color Temperature | 3000 Kelvin |
| Type of Bulb | Integrated LED |
| Material | Metal |
| Finish | Polished Chrome |
| Product Dimensions | 30.75 x 5 x 6.5 inches (L x W x H) |
| Item Weight | 3.75 pounds |
| Mounting Type | Wall/Ceiling |
| Special Features | Energy Efficient |
Warranty and Support
This AFX lighting fixture is covered by a 5-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or any questions regarding your product, please contact AFX customer service. Refer to the AFX official website for current contact information.
Online Support: Visit the AFX Store on Amazon
