Product Overview
The Waterdrop 10UB-UF Under Sink Water Filter System provides advanced filtration for your drinking water. Designed for easy installation and maintenance, it effectively reduces various contaminants while retaining beneficial minerals.
Image: The Waterdrop 10UB-UF filter unit shown alongside its dedicated brushed stainless steel faucet.
Key Features
- Innovative Multistage Filtration: This system utilizes advanced filtration technology, including a 0.01 µm Ultrafiltration membrane, to reduce chlorine, taste, odor, heavy metals, chemical impurities, sediment, and large particles. It is tested by third-party laboratories against NSF/ANSI 42 and 53 standards for lead reduction.
- Superior Material: Constructed with BPA-free and lead-free materials, ensuring reliable and safe water. The activated carbon is derived from natural coconut shells.
- Clogging Prevention: An upgraded filtration area provides a 20X increase in dirt adhesion, enhancing filtration capability and minimizing clogging.
- Fast Flow Rate: Delivers a full flow rate of 0.75 gpm at 60 psi, providing quick access to pure, fresh-tasting water.
- Versatile Use: Suitable for household and commercial applications in kitchens, RVs, or offices.
Image: Diagram illustrating the compact dimensions of the filter unit and its effectiveness in reducing various contaminants.
Components Included
The Waterdrop 10UB-UF system comes with all necessary components for installation:
- Filter System Unit (x1)
- SS304 Faucet Set (x1)
- 3/8''-1/2'' Convertor Set
- Accessory Kit (x1)
The accessory kit typically includes tape, screws, hose locks, and a drilling assist sticker.
Installation Guide
Follow these steps for a quick and easy installation. This system is designed for cold water supply only.
1. Prepare for Installation
- Turn off Water Supply: Locate the cold water shut-off valve under your sink and turn it off. Open your faucet to drain any remaining water.
- Choose Mounting Location: Select a suitable location under your sink for the filter unit. Ensure there is enough space for the unit and for future filter replacements.
- Use Drilling Assist Sticker: The included drilling assist sticker helps mark the precise locations for mounting screws.
Image: Visual guide for checking under-sink dimensions to ensure proper fit for the filter unit, which can be installed horizontally or vertically.
2. Mount the Filter Unit
- Drill pilot holes at the marked locations.
- Insert the screws, leaving a small gap for the filter unit to hang.
- Slide the filter unit onto the screws to secure it.
Image: Step-by-step visual of the installation process, highlighting the ease of connecting to the cold water line and dedicated faucet.
3. Connect Hoses
The system uses innovative push-to-connect fittings for easy hose attachment. Ensure correct inlet and outlet connections.
- Connect the inlet hose to your cold water supply line. Use the 3/8''-1/2'' convertor fitting if needed.
- Connect the outlet hose from the filter unit to the dedicated faucet.
- Ensure all connections are secure to prevent leaks.
Video: Demonstrates how to correctly install and disconnect the hoses for the Waterdrop filter system, ensuring proper connection and preventing issues.
Video: A plumber's feedback on the Waterdrop filter, showcasing the installation process and highlighting key connection points.
4. Flush the System
- Slowly turn on the cold water supply.
- Open the dedicated faucet and let the water run for at least 10 minutes to flush the system and remove any carbon fines.
Operating Instructions
Once installed, operate the dedicated faucet to dispense filtered water. The fast flow rate ensures quick access to clean water for drinking, cooking, and other uses.
Video: Demonstrates the water flow from the dedicated faucet after installation, highlighting its effectiveness.
Maintenance
Filter Replacement
The WD-RF10-UF filter has a lifespan of 12 months or 11,000 gallons, whichever comes first. Replacement is quick and tool-free:
- Turn off the cold water supply to the filter system.
- Twist the old filter cartridge counter-clockwise to unlock and pull it down to remove.
- Insert the new filter cartridge (Model: WD-RF10-UF) into the filter head and twist clockwise to lock it into place.
- Turn on the cold water supply and flush the new filter for 10 minutes.
Image: Visual guide demonstrating the easy twist-and-lock mechanism for quick filter replacement.
Filter Life Reminder
Your system may come with either an internal or external filter life reminder. Both versions use indicator lights and beeps to signal when a filter replacement is needed.
Image: Depicts the two types of filter life reminders, showing their indicator lights for good status (green/blue) and replacement needed (red light & beep).
Troubleshooting
- Slow Flow Rate or Clogging: If you experience a slow flow rate or rapid clogging, ensure that the inlet and outlet hoses are connected correctly. Refer to the installation video for proper hose connection.
- Unresolved Issues: For any problems not resolved by the above steps, please contact Waterdrop customer service.
Video: Explains the concept of Total Dissolved Solids (TDS) in water and its relevance to water quality, helping users understand filtration.
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 3.9"L x 3.6"W x 12.3"H |
| Item Model Number | WD-10UB-UF |
| Material | BPA-FREE Material, Lead-Free Material |
| Capacity | 11000 Gallons |
| Purification Method | Ultrafiltration (0.01 µm), Activated Carbon Block |
| Flow Rate | 0.75 gpm at 60 psi |
| Installation Type | Under Sink |
| Special Feature | Chlorine and bacteria reduction, 12 months or 11,000 gallons lifespan, 0.01 µm filtration accuracy |
Warranty and Support
For any questions, technical assistance, or warranty claims, please contact Waterdrop customer support:
- Phone: +1-888-352-3558
- Email: UWF@waterdropfilter.com
You can also visit the Waterdrop Store on Amazon for more information and products.
