Introduction
This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of your Utilitech Thermoplastic Submersible Utility Pump. Please read this manual thoroughly before use and retain it for future reference.
Important Safety Information
- Always disconnect power before servicing or cleaning the pump.
- Do not operate the pump with a damaged cord or plug.
- Ensure the pump is properly grounded.
- Do not use the pump for flammable liquids or in hazardous locations.
- Keep children and pets away from the operating pump.
- Wear appropriate personal protective equipment (PPE) when handling the pump.
- This pump is designed for water only.
Product Overview
The Utilitech Thermoplastic Submersible Utility Pump is designed for efficient water removal from various areas. Key features include:
- Material: Thermoplastic construction for durability.
- Power: 1/3 HP motor.
- Flow Rate: 30 GPM (Gallons Per Minute).
- Cord Length: 10 ft / 3.04 m cord.
- Voltage: 115 Volts.
- Style: Submersible design for effective water transfer.
Image 1: The Utilitech Thermoplastic Submersible Utility Pump shown in its retail packaging, highlighting its key features like 1/3 HP, 30 GPM flow rate, and 10 ft cord.
Technical Specifications
| Feature | Specification |
|---|---|
| Brand | Utilitech |
| Model | Thermoplastic Submersible Utility Pump |
| Material | Thermoplastic |
| Style | Submersible |
| Power Source | AC/DC |
| Horsepower (HP) | 1/3 HP |
| Flow Rate | 30 GPM |
| Voltage | 115 Volts |
| Cord Length | 10 ft / 3.04 m |
| Color | Black |
| Item Weight | 10 pounds |
| Package Dimensions | 11 x 8 x 7 inches |
| UPC | 054757098391 |
Installation and Setup
Unpacking
- Carefully remove the pump and all accessories from the packaging.
- Inspect the pump for any signs of damage. Do not use if damaged.
- Retain packaging for future storage or transport.
Placement
- Place the pump on a solid, level surface in the area to be drained.
- Ensure the pump is fully submerged in water for optimal operation and cooling.
- Avoid placing the pump directly on mud, sand, or debris to prevent clogging.
Connections
- Attach a suitable discharge hose (not included) to the pump's outlet. Ensure a secure, leak-free connection.
- Position the discharge hose to direct water away from the area being drained and towards a suitable disposal point.
- Plug the pump into a properly grounded 115-volt AC outlet.
Operating Your Pump
Starting the Pump
- Ensure the pump is correctly installed and submerged.
- Plug the power cord into a grounded electrical outlet. The pump will begin operating immediately.
Stopping the Pump
- Unplug the power cord from the electrical outlet to stop the pump.
- Do not allow the pump to run dry for extended periods, as this can cause damage.
Continuous Operation
- Monitor the pump during operation to ensure it is functioning correctly and not running dry.
- If the pump stops pumping water, unplug it immediately and check for blockages or low water levels.
Maintenance
Regular Cleaning
- Disconnect power before any maintenance.
- Periodically inspect the pump intake screen for debris. Clean any accumulated dirt, leaves, or other foreign objects.
- Rinse the pump with clean water after use, especially if pumping dirty water.
Storage
- For long-term storage, clean the pump thoroughly and allow it to dry completely.
- Store the pump in a dry, frost-free location.
- Do not store the pump with water inside if there is a risk of freezing.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Pump does not start | No power | Check power outlet, circuit breaker, and cord connection. |
| Pump does not start | Impeller jammed | Disconnect power, inspect intake for debris, and clear any obstructions. |
| Pump runs but no water | Low water level | Ensure pump is fully submerged. |
| Pump runs but no water | Clogged intake/discharge | Disconnect power, clear intake screen and discharge hose. |
| Reduced flow | Partial blockage | Disconnect power, clean intake screen and check hose for kinks. |
| Pump cycles on/off frequently | Water level fluctuation | Ensure stable water level or adjust pump placement. |
Warranty and Customer Support
Warranty Information
This Utilitech pump comes with a 1-year limited warranty from the date of purchase, covering defects in materials and workmanship. Please retain your proof of purchase.
Customer Support
For technical assistance, replacement parts, or warranty claims, please contact Utilitech customer support. Refer to the product packaging or the official Utilitech website for current contact information.
You can also visit the official Utilitech website for additional resources: www.utilitech.com
