Flash Furniture Wren 24-inch Square Height Adjustable Activity Table User Manual

Introduction

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your Flash Furniture Wren 24-inch Square Height Adjustable Activity Table. Please read this manual thoroughly before using the product to ensure safe and correct usage. Keep this manual for future reference.

Image: The Flash Furniture Wren 24-inch Square Height Adjustable Activity Table, shown in natural color, featuring its square tabletop and four adjustable legs.

Safety Information

Observe the following safety precautions to prevent injury or damage to the product:

• Ensure all components are securely fastened before use.
• Do not exceed the maximum recommended load of 220 pounds.
• Supervise children during use, especially when adjusting the table height.
• Keep small parts away from young children during assembly to prevent choking hazards.
• The table features safety rounded corners to reduce injury, but caution should still be exercised.

Assembly Instructions

Your activity table requires minimal assembly. Follow these steps:

1. Unpack all components and verify against the parts list (not provided in this manual, refer to packaging).
2. Attach each leg to the underside of the tabletop. Ensure the leg brackets align with the pre-drilled holes.
3. Secure each leg using the provided screws and bolts. Tighten all fasteners firmly, but do not overtighten.
4. Once all legs are attached, carefully turn the table upright.

Image: Underside of the table, illustrating the steel frame and the points where the legs attach to the tabletop.

Operating Instructions: Adjusting Table Height

The Flash Furniture Wren Activity Table features adjustable legs, allowing you to customize the table height to suit children up to age 7. The height can be adjusted from 14.5 inches to 23.75 inches.

1. Locate the adjustment screws on each leg.
2. Using the provided key or appropriate tool, loosen the screw on one leg.
3. Carefully extend or retract the inner steel leg to the desired height. Ensure the pin locks into one of the pre-drilled holes.
4. Tighten the screw firmly to secure the leg at the new height.
5. Repeat this process for all remaining legs, ensuring all legs are set to the same height for stability.

Image: A close-up view of an adjustable table leg, showing the inner steel tube with multiple height adjustment holes and the locking mechanism.

Image: The activity table with visual indicators showing its width (24 inches), depth (24 inches), and adjustable height range (14.5 to 23.75 inches).

Maintenance

Regular maintenance ensures the longevity and safety of your activity table.

• Cleaning: Wipe the plastic tabletop and legs with a damp cloth and mild soap. Avoid abrasive cleaners that may damage the surface. The low-maintenance top is designed for easy cleaning.
• Inspection: Periodically check all screws and bolts to ensure they remain tight. Retighten as necessary.
• Storage: Store the table in a dry environment to prevent rust on metal components.

Troubleshooting

Specifications

Warranty and Support

This Flash Furniture product comes with a 3-year limited warranty. For warranty claims, technical support, or replacement parts, please contact Flash Furniture customer service. Refer to the product packaging or the official Flash Furniture website for current contact information.

Note: Warranty terms and conditions may apply.