Introduction
Thank you for choosing SoundPEATS Air3 Wireless Earbuds. This manual provides essential information for setting up, operating, and maintaining your earbuds to ensure the best audio experience.
Image: SoundPEATS Air3 Wireless Earbuds in their open charging case. The earbuds are a light purple color, matching the case. A small LED indicator light is visible on the front of the case.
Setup
1. Initial Charging
Before first use, ensure both the earbuds and the charging case are fully charged. Connect the charging case to a USB power source using the provided USB-C cable.
2. Pairing
- Open the charging case. The earbuds will automatically enter pairing mode.
- Activate Bluetooth on your device (smartphone, tablet, etc.).
- Search for "SoundPEATS Air3" in the Bluetooth device list and select it to connect.
- Once connected, you will hear a voice prompt confirming successful pairing.
3. Fitting the Earbuds
Gently insert the earbuds into your ears and rotate them slightly to find a comfortable and secure fit. The ergonomic design ensures a snug fit for various activities.
Image: A woman wearing a SoundPEATS Air3 earbud in her ear. An inset graphic highlights the in-ear detection sensor on the earbud.
Operating Instructions
Touch Controls
The SoundPEATS Air3 earbuds feature sensitive touch controls for managing audio playback and calls.
- Play/Pause: Double-tap the touch area on either earbud.
- Volume Up: Tap the right earbud once.
- Volume Down: Tap the left earbud once.
- Next Track: Press and hold the right earbud's touch area for 1.5 seconds.
- Previous Track: Press and hold the left earbud's touch area for 1.5 seconds.
- Answer/End Call: Double-tap the touch area on either earbud.
- Reject Call: Press and hold the touch area on either earbud for 1.5 seconds.
- Activate Voice Assistant: Triple-tap the right earbud.
Game Mode
For an optimized gaming experience with reduced audio latency, activate Game Mode.
- Activate Game Mode: Triple-tap the left earbud.
- Deactivate Game Mode: Triple-tap the left earbud again.
Image: SoundPEATS Air3 earbuds floating above a smartphone displaying a mobile game, highlighting the Qualcomm aptX-Adaptive technology for low latency.
In-Ear Detection
The earbuds feature in-ear detection, which automatically pauses music when an earbud is removed and resumes playback when reinserted.
Charging
Earbud Charging
Place the earbuds back into the charging case. The indicator lights on the earbuds will show their charging status. A full charge provides approximately 5 hours of playtime.
Case Charging
Connect the charging case to a USB power source using the USB-C cable. The case provides an additional 2.5 recharges, extending total playtime to 17.5 hours.
Image: Contents of the SoundPEATS Air3 package, including the earbuds, charging case, USB-C charging cable, and user manual.
Maintenance
- Keep the earbuds and charging case clean and dry.
- Avoid extreme temperatures and direct sunlight.
- Do not disassemble the product.
- Use a soft, dry cloth to clean the charging contacts and ear tips.
Troubleshooting
Connection Issues
- Ensure Bluetooth is enabled on your device and the earbuds are within range.
- If earbuds fail to pair, try resetting them. Place both earbuds back into the charging case, close the lid, then open it again to re-enter pairing mode.
- If issues persist, clear the "SoundPEATS Air3" pairing record from your device's Bluetooth list and attempt to pair again.
Audio Problems
- Check the volume levels on both your device and the earbuds.
- Ensure the earbuds are properly seated in your ears for optimal sound.
- If one earbud is silent, try placing both back in the case and taking them out again.
Specifications
| Feature | Detail |
|---|---|
| Model Name | Air3 |
| Connectivity Technology | Wireless (Bluetooth) |
| Wireless Communication Technology | Bluetooth 5.2 |
| Bluetooth Range | 10 Meters |
| Audio Codec | aptX-Adaptive (24bit 420khz support) |
| Chipset | Qualcomm QCC3040 |
| Microphones | 4-Mic (dual-mic per earbud) with cVc 8.0 Noise Cancellation |
| Audio Driver Type | Dynamic Driver |
| Audio Driver Size | 14.2 Millimeters |
| Battery Life (Earbuds) | 5 Hours per charge |
| Battery Life (Total with Case) | 17.5 Hours |
| Charging Port | USB-C |
| Water Resistance Level | Waterproof (IPX7 mentioned in reviews, but product specs say "Waterproof") |
| Control Method | Touch |
| Product Dimensions | 2.8 x 1.8 x 1.1 inches |
| Item Weight | 6.6 ounces |
Warranty & Support
SoundPEATS offers comprehensive support and service protection for its products. For warranty claims, technical assistance, or further inquiries, please refer to the contact information provided in your product packaging or visit the official SoundPEATS website.
The brand is committed to customer satisfaction and provides reliable quality and support.
Image: The official SoundPEATS brand logo.
