Bagotte BG600/BG700 Robotic Vacuum Cleaner Replacement Parts User Manual

Introduction

This manual provides essential instructions for the installation and maintenance of your Bagotte BG600/BG700 Robotic Vacuum Cleaner replacement parts. Regular replacement of these accessories ensures optimal performance and extends the lifespan of your robotic vacuum.

Package Contents

Please verify that all items are included in your package:

• 4 x Side Brush
• 2 x Filter (High-Performance Filter & Foam Filter)
• 1 x Rolling Brush

Image: A complete set of Bagotte BG600/BG700 robotic vacuum cleaner replacement parts, including a rolling brush, four side brushes, and two sets of filters (high-performance and foam).

Setup and Installation

No tools are required for the installation of these replacement parts.

1. Installing the Rolling Brush

1. Open the rolling brush protection cover on your robotic vacuum.
2. Align the interface of the new rolling brush with the slot.
3. Install the rolling brush directly by pressing it into place until it clicks securely.

Image: A close-up view of the rolling brush, illustrating its design and connection points for installation.

2. Installing the Filter

1. Open the trash bin of your robotic vacuum.
2. Remove the old filter by grasping the white tab.
3. Insert the new High-Performance Filter and Foam Filter into the designated slots within the trash bin. Ensure they are seated correctly.

Image: A detailed view of the foam and high-performance filters, showing their layered structure and how they fit together.

3. Installing the Side Brushes

1. Locate the side brush slots on the bottom of your robotic vacuum.
2. Attach the new side brushes by pressing each brush firmly into its respective slot until it locks into place.

Image: A close-up of the three-pronged side brushes, highlighting their design for sweeping debris.

Operating Your Robotic Vacuum (with new parts)

Once the replacement parts are installed, your Bagotte robotic vacuum is ready for operation. Refer to your original robotic vacuum cleaner's user manual for specific operating instructions, scheduling, and mode selections.

The new rolling brush and side brushes will effectively sweep debris into the vacuum's path, while the new filters will ensure efficient air filtration.

Maintenance Tips

Regular cleaning and timely replacement of accessories are crucial for maintaining the optimal performance of your Bagotte robotic vacuum cleaner.

1. Emptying the Robot's Bin

1. Press the bin release button to remove the bin from the robot.
2. Open the bin's door to empty accumulated dust and debris into a trash container.

2. Cleaning the Robot's Filter

1. Remove the filter by grasping the white tab.
2. Shake off debris by tapping the filter against your trash container. For thorough cleaning, you may gently brush off any remaining dust.

3. Cleaning the Robot's Rolling Brush, Side Brush, and Swivel Wheel

• Rolling Brush: Take out the rolling brush. Clean the vacuuming aisle with a soft cloth. Clean the rolling brush itself, cutting down any hair wound around it using the provided cleaning tool's knife.
• Side Brush: Remove the side brush. Use a cloth to remove dust and debris from the brush and its base.
• Swivel Wheel: Pull out the swivel wheel. Clean the Swivel Wheel with the cleaning tool to remove any trapped hair or debris.

4. Cleaning the Sensors and Charging Pins

To maintain the best performance, clean the drop sensors and charging contact pins regularly. Dust off these components using a soft cloth or a cleaning brush.

Recommendation: We recommend replacing the accessories every 3 months for optimal cleaning performance.

Troubleshooting

If you experience issues after replacing parts, consider the following:

• Reduced Suction: Ensure the dustbin is empty and the filters are clean and correctly installed. A clogged filter is a common cause of reduced suction.
• Brushes Not Spinning/Working: Check if the rolling brush and side brushes are free from hair or debris entanglement. Ensure they are securely clicked into their slots.
• Robot Not Charging: Clean the charging pins on both the robot and the charging base. Ensure there are no obstructions.
• Error Messages: Refer to your original Bagotte BG600/BG700 user manual for specific error codes and their solutions.

If problems persist, please contact Bagotte customer support.

Specifications (Replacement Parts)

Model Number: BHV10#3

Manufacturer: Bagotte

Product Videos

The following videos demonstrate general vacuum cleaner features and may not specifically feature the Bagotte BG600/BG700 robotic vacuum or its replacement parts. They are provided for general informational purposes regarding vacuum functionality.

Warranty and Support

For warranty information, technical support, or any inquiries regarding your Bagotte products, please visit the official Bagotte website or contact their customer service directly. Keep your purchase receipt for warranty claims.

You can visit the Bagotte Store on Amazon for more information: Bagotte Amazon Store